مقدمة
This manual provides essential instructions for the setup, operation, and maintenance of your Epson TM-T88V Thermal Receipt Printer. The TM-T88V is designed for reliable and high-speed receipt printing in various point-of-sale environments. Please read this manual thoroughly before using the printer to ensure proper functionality and longevity.
محتويات الحزمة
تأكد من وجود جميع العناصر في العبوة:
- Epson TM-T88V Thermal Receipt Printer
- Power Supply Unit (PS180)
- التيار المتردد كابل
- Roll of Thermal Paper (for initial setup)
- دليل المستخدم (هذا المستند)
Image: Epson TM-T88V printer, power supply, and connecting cables. The printer is dark grey with the Epson logo on the front. The power supply is a black rectangular unit, and two black cables are coiled in the foreground.
Note: Communication cables (USB or Serial) are typically sold separately and are not included in the standard package.
يثبت
1. توصيل التيار الكهربائي
- Connect the power supply unit (PS180) to the printer's power input port.
- Plug the AC power cable into the power supply unit.
- Insert the AC power cable into a standard electrical outlet.
- Press the power button on the front of the printer to turn it on. The power indicator light should illuminate.
2. تحميل الورق الحراري
- Open the printer's roll paper cover by pushing the lever on the right side and lifting the cover.
- Insert a new roll of thermal paper into the paper compartment. Ensure the paper feeds from the bottom of the roll and the leading edge is straight.
- Pull approximately 2-3 inches of paper past the cutter.
- Close the roll paper cover firmly until it clicks into place. The printer will automatically feed the paper to the correct starting position.
3. Connecting to a Computer/POS System
The TM-T88V supports USB and Serial (RS232) connectivity.
- اتصال USB: Connect a USB cable (Type A to Type B, not included) from your computer or POS system to the USB port on the printer.
- الاتصال التسلسلي: Connect a Serial (RS232 25-pin, not included) cable from your computer or POS system to the Serial port on the printer.
After connecting, install the appropriate printer drivers for your operating system (Windows, Mac OS X, Linux). Drivers are typically available on the Epson support webموقع.
تعليمات التشغيل
طباعة الإيصال
Once the printer is set up and drivers are installed, it will function as a standard printer for your POS software or application. Send print commands from your software, and the printer will automatically print and cut the receipt.
- Ensure the printer is powered on and connected to your system.
- Verify that thermal paper is loaded correctly and not jammed.
- Initiate the print command from your point-of-sale application.
- The printer will print the receipt and automatically cut the paper.
مؤشرات LED
- مؤشر الطاقة LED: يشير إلى أن الطابعة قيد التشغيل.
- مؤشر LED للخطأ: Illuminates or flashes to indicate an error condition (e.g., paper out, cover open, cutter error). Refer to the Troubleshooting section.
- Paper LED: يضيء عند انخفاض مستوى الورق أو نفاده.
صيانة
استبدال الورق الحراري
When the Paper LED illuminates or the printer stops printing, the thermal paper roll needs replacement. Follow the steps outlined in the "Loading Thermal Paper" section under Setup.
تنظيف الطابعة
يساعد التنظيف المنتظم في الحفاظ على جودة الطباعة وإطالة عمر الطابعة.
- Turn off the printer and disconnect the power cable before cleaning.
- استخدم قطعة قماش ناعمة وخالية من الوبر برفق دampened with water or isopropyl alcohol to clean the exterior of the printer.
- To clean the thermal print head, open the paper cover and gently wipe the print head surface with a cotton swab lightly moistened with isopropyl alcohol. Allow it to dry completely before closing the cover and powering on.
- Clean the paper path and cutter area to remove any paper dust or debris.
Avoid using abrasive cleaners or solvents that could damage the printer's surfaces.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الطابعة لا تعمل. | تم فصل كابل الطاقة، هناك مشكلة في منفذ الطاقة. | Check all power connections. Try a different power outlet. |
| No printing / Error LED on. | Paper out or jammed; cover open; communication error. | Load new paper. Close cover securely. Check communication cable connection. Reinstall drivers if necessary. |
| Poor print quality (faded, blank lines). | Thermal print head dirty; low-quality thermal paper; print head wear. | Clean the thermal print head. Use recommended thermal paper. If issue persists, contact support. |
| Paper does not cut automatically. | Cutter jammed; cutter mechanism dirty. | Turn off printer, open cover, carefully remove any paper debris from the cutter area. Clean the cutter. |
تحديد
الصورة: الجانب view of the Epson TM-T88V printer with dimensions. The height is indicated as 6.3 inches (16 cm).
| ميزة | التفاصيل |
|---|---|
| اسم الموديل | تم-T88V |
| رقم موديل العنصر | C31CA85084 |
| تكنولوجيا الطباعة | خط الطباعة الحرارية |
| دقة الطباعة | 203 نقطة في البوصة (نقطة في البوصة) |
| سرعة الطباعة (أحادية اللون) | Up to 30 lines per second (approximate, high-speed) |
| مخرجات الطابعة | أحادي اللون |
| الاتصال | USB 2.0, Serial (RS232 25-pin) |
| ميزة خاصة | قاطع آلي |
| الوسائط المدعومة | Thermal Receipt Paper Rolls (typically 3.125 inches / 80mm width) |
| أبعاد المنتج (العمق × العرض × الارتفاع) | 7 بوصة × 5 بوصة × 5 بوصة (تقريبًا) |
| وزن العنصر | 2.43 رطل |
| تخزين الذاكرة | 64 ميجا بايت |
| أنظمة التشغيل المتوافقة | Microsoft Windows (7, Vista, XP, 2000), Mac OS X (v10.4, v10.5, v10.6), Linux |
| لون | Epson Dark Grey |
معلومات الضمان
The Epson TM-T88V Thermal Receipt Printer comes with a Limited Warranty. For specific terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or visit the official Epson webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة مطالبات الضمان.
يدعم
For technical assistance, driver downloads, or further information regarding your Epson TM-T88V printer, please visit the official Epson support webقم بزيارة الموقع أو اتصل بخدمة عملاء إبسون.
Official Epson Webموقع: www.epson.com/support
