مقدمة
This manual provides detailed instructions for the installation, operation, and maintenance of your Leviton SSJ7-40 1-Gang 1-Receptacle Stainless Steel Midway Size Wallplate. Designed for durability and a clean aesthetic, this wallplate is suitable for various residential and commercial applications, covering a single 1.406-inch diameter locking/straight blade type receptacle.
The SSJ7-40 features a brushed stainless steel finish, offering a non-magnetic and robust solution for your electrical installations. It is UL and CSA approved, ensuring compliance with safety standards.
معلومات السلامة
تحذير: To avoid fire, shock, or death, always turn off power at the circuit breaker or fuse box before wiring or servicing. This product must be installed in accordance with national and local electrical codes.
- تأكد من فصل الطاقة قبل التثبيت.
- إذا لم تكن متأكدًا من أي جزء من هذه التعليمات ، فاستشر كهربائيًا مؤهلًا.
- Do not use this wallplate for applications other than its intended purpose.
- Inspect the wallplate for any damage before installation. Do not install damaged products.
محتويات الحزمة
- Leviton SSJ7-40 1-Gang 1-Receptacle Stainless Steel Wallplate
- Mounting Screws (typically two, matching the wallplate finish)
الإعداد والتثبيت
Follow these steps to properly install your Leviton SSJ7-40 wallplate:
- إيقاف تشغيل الطاقة: Locate the circuit breaker or fuse that controls the power to the receptacle where the wallplate will be installed. Turn off the power completely. Verify power is off using a voltagه اختبار.
- Remove Old Wallplate (if applicable): Carefully unscrew and remove the existing wallplate.
-
Prepare the Wallplate: The Leviton SSJ7-40 wallplate may come with a protective blue film to prevent scratches during shipping and installation. Gently peel off this film from the front surface of the wallplate before mounting.
Image: Leviton SSJ7-40 wallplate showing the blue protective film that needs to be removed before installation.
Image: A hand gently peeling off the blue protective film from the corner of the stainless steel wallplate.
-
قم بوضع لوحة الحائط: Align the new Leviton SSJ7-40 wallplate over the receptacle, ensuring the opening perfectly matches the device.
Image: The Leviton SSJ7-40 wallplate, ready for installation over a single receptacle.
- قم بتثبيت لوحة الحائط: Insert the provided mounting screws into the designated holes on the wallplate and carefully tighten them with a screwdriver. Do not overtighten, as this can damage the wallplate or the receptacle.
- اعادة الطاقة: Once the wallplate is securely installed, turn the power back on at the circuit breaker or fuse box.
تعليمات التشغيل
The Leviton SSJ7-40 wallplate functions as a protective and aesthetic cover for a single 1.406-inch diameter locking/straight blade type receptacle. Once installed, it requires no further operation. Its purpose is to safely enclose the electrical wiring and provide a finished appearance.
صيانة
To maintain the appearance and integrity of your stainless steel wallplate:
- تنظيف: امسح السطح بقطعة ناعمة ، دamp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the brushed stainless steel finish.
- تقتيش: Periodically check the wallplate for any signs of damage, loosening, or discoloration. If any issues are found, ensure power is off before inspecting further or replacing.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Wallplate does not fit flush. | Receptacle not properly seated in the electrical box, or mounting screws are overtightened/uneven. | Ensure power is off. Loosen receptacle mounting screws, adjust receptacle position, then re-tighten. Re-install wallplate, ensuring screws are tightened evenly but not excessively. |
| Scratches or marks on the wallplate. | Protective film not removed, or abrasive cleaning materials used. | If protective film is still present, carefully peel it off. For existing scratches, consider replacement for aesthetic reasons. Use only soft cloths and mild cleaners for maintenance. |
| Wallplate appears loose. | براغي التثبيت فضفاضة. | Ensure power is off. Gently tighten the mounting screws until the wallplate is secure. Do not overtighten. |
تحديد
| رقم الموديل | SSJ7-40 |
| إعدادات | 1-Gang, 1-Receptacle (1.406-inch diameter hole) |
| مادة | 302 الفولاذ المقاوم للصدأ |
| نوع التشطيب | الفولاذ المقاوم للصدأ المصقول |
| لون | Non-Magnetic Stainless Steel |
| Designated Size | منتصف الطريق |
| الأبعاد (المنتج) | 6.63 × 4.13 × 0.25 بوصات (تقريبًا) |
| وزن العنصر | 2.11 أونصات |
| الموافقات | UL، CSA |
| نوع التثبيت | برغي في |
معلومات الضمان
هذا المنتج من Leviton مشمول بضمان الشركة المصنعة. لمزيد من التفاصيل حول فترة الضمان وشروطه، يُرجى مراجعة الوثائق المرفقة مع عملية الشراء أو زيارة الموقع الرسمي لشركة Leviton. webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.
يدعم
For technical assistance, product inquiries, or further support, please contact Leviton customer service. You can find contact information and additional resources on the official Leviton webموقع:
When contacting support, please have your product model number (SSJ7-40) available.
