Leviton 15A, 125V Snap-In Receptacle (Model 1306) Instruction Manual

1. المقدمة

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Leviton 15A, 125V Snap-In Receptacle, Model 1306. This product is designed for panel installation and features 14 AWG, 6-inch long wire leads for connection.

يرجى قراءة هذا الدليل جيداً قبل البدء في التثبيت أو الاستخدام لضمان الأداء السليم والسلامة.

2. معلومات السلامة

تحذير: خطر التعرض لصدمة كهربائية أو حريق. Improper installation or use can lead to serious injury or death. Always follow these safety guidelines:

• فصل الطاقة: Always turn off power at the circuit breaker or fuse box before installing or servicing this receptacle. Verify power is off using a voltagه اختبار.
• شخص مؤهل: Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and building codes.
• التوصيلات الصحيحة: Ensure all wire connections are secure and comply with local and national electrical codes.
• للاستخدام الداخلي فقط: This receptacle is intended for indoor use in dry locations unless otherwise specified by its enclosure.
• Do Not Exceed Ratings: Do not connect devices that exceed the receptacle's 15A, 125V rating.
• فحص الضرر: Before installation, inspect the receptacle for any signs of damage. Do not install if damaged.

3. انتهى المنتجview

The Leviton Model 1306 is a polarized, snap-in receptacle designed for easy panel mounting. It features a durable thermoplastic body and pre-wired 14 AWG leads for convenient electrical connection. This receptacle is suitable for various applications requiring a reliable 15A, 125V power connection.

الصورة 1: الجبهة view of the Leviton 15A, 125V Snap-In Receptacle (Model 1306) in black, showing the polarized outlet configuration and pre-attached wire leads.

4. الإعداد والتثبيت

Follow these steps for proper installation of the snap-in receptacle:

1. تحضير مكان التثبيت: Ensure the panel opening measures approximately 0.97 inches by 0.52 inches. The panel material should be suitable for snap-in mounting.
2. فصل الطاقة: Before proceeding, turn off the power to the circuit at the main service panel. Confirm power is off using a voltagه اختبار.
3. Insert Receptacle: Align the receptacle with the prepared opening in the panel. Push firmly until the snap-in clips engage and the receptacle is securely seated.
4. وصلات الأسلاك: The receptacle comes with 14 AWG, 6-inch long wire leads. Connect these leads to the appropriate circuit wiring. Ensure the polarity is correct:
   • Connect the ribbed (neutral) wire from the receptacle to the neutral (white) wire of the circuit.
   • Connect the smooth (hot) wire from the receptacle to the hot (black or colored) wire of the circuit.
   • If a ground wire is present in your application, ensure it is properly connected to the system ground.
   استخدم موصلات الأسلاك المناسبة (غير مرفقة) لتأمين جميع التوصيلات.
5. التوصيل الآمن: Ensure all wiring is neatly arranged and secured within the enclosure, preventing any strain on the connections or interference with other components.
6. اعادة الطاقة: بمجرد اكتمال التثبيت والتحقق من جميع التوصيلات، قم باستعادة الطاقة عند قاطع الدائرة.
7. وظيفة الاختبار: Plug a known working device into the newly installed receptacle to confirm proper operation.

5. تعليمات التشغيل

The Leviton 1306 Snap-In Receptacle operates as a standard 15A, 125V electrical outlet. To use, simply plug in any compatible electrical device. Ensure the device's power requirements do not exceed the receptacle's maximum rating of 15 Amperes at 125 Volts.

This receptacle is polarized, meaning it has one slot wider than the other. Ensure that the plug of your device matches this configuration for proper and safe connection.

6. الصيانة

The Leviton 1306 Snap-In Receptacle requires minimal maintenance. Regular inspection and cleaning are recommended to ensure continued safe operation.

• تنظيف: To clean the receptacle, first disconnect power to the circuit. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or solvents, as these can damage the thermoplastic material.
• تقتيش: Periodically inspect the receptacle for any signs of wear, damage, or loose connections. Look for cracks in the housing, discoloration, or signs of overheating. If any damage is observed, disconnect power and replace the receptacle immediately.
• الظروف البيئية: Ensure the receptacle is not exposed to moisture or extreme temperatures outside its rated operating range (-40°C to 60°C).

7. استكشاف الأخطاء وإصلاحها

If the receptacle is not functioning correctly, consider the following troubleshooting steps:

• لا يوجد طاقة:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker if it has tripped or replace the fuse if blown.
  • Verify that the power supply to the circuit is active using a voltagه اختبار.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
• اتصال فضفاض: If a plug feels loose in the receptacle, disconnect power and inspect the receptacle for damage or wear. Replace if necessary.
• ارتفاع درجة الحرارة: If the receptacle feels warm to the touch, immediately disconnect power and unplug any devices. This could indicate an overload or a faulty connection. Consult a qualified electrician.

If issues persist after troubleshooting, contact a qualified electrician for assistance.

8. المواصفات

9. معلومات الضمان

هذا المنتج من ليفيتون مشمول بضمان الشركة المصنعة. لمزيد من التفاصيل حول فترة الضمان، والتغطية، وإجراءات المطالبات، يرجى الرجوع إلى موقع ليفيتون الرسمي. webيمكنك زيارة الموقع أو الاتصال مباشرةً بدعم عملاء ليفيتون. احتفظ بإيصال الشراء كإثبات للشراء.

10. الدعم

For technical assistance, installation questions, or further product information, please contact Leviton customer support. You can typically find contact information on the official Leviton webموقع (www.leviton.com) or on the product packaging.

عند الاتصال بالدعم، يرجى تجهيز رقم طراز المنتج (1306) وأي معلومات شراء ذات صلة.