1. المقدمة
This manual provides essential information and instructions for the ALLIANCE LAUNDRY SYSTEMS Speed Queen F300128P Solenoid Door Relay. It is designed to assist qualified technicians and service personnel with the proper installation, operation, maintenance, and troubleshooting of this component. Please read this manual thoroughly before attempting any procedures.
2. انتهى المنتجview
The F300128P is a Door Release Detrol Solenoid designed for 110/220 Volt applications. This component is critical for the proper functioning of the door release mechanism in compatible laundry equipment. It is a genuine OEM part compatible with Speed Queen, Huebsch, and Unimac machines manufactured by Alliance Laundry Systems.
This image displays the individual components of the F300128P solenoid: the main solenoid coil housing (blue interior, grey exterior), the metallic plunger with a threaded end, and a coiled spring. These parts work together to control the door release mechanism.
3. معلومات السلامة
تحذير: خطر التعرض لصدمة كهربائية وإصابة.
- Always disconnect power to the appliance before installing, servicing, or removing this component. Failure to do so can result in serious injury or death.
- يجب أن يتم التركيب والصيانة فقط بواسطة أفراد مؤهلين ومرخصين.
- تأكد من أن جميع التوصيلات الكهربائية آمنة وتتوافق مع القوانين الكهربائية المحلية.
- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Handle with care and wash hands after handling.
- Do not operate the appliance if the solenoid or associated wiring appears damaged.
4. التثبيت
The F300128P solenoid is an electrical component that requires careful installation. It is recommended that installation be performed by a certified technician.
4.1 خطوات ما قبل التثبيت
- فصل الطاقة: Ensure the main power supply to the laundry appliance is completely disconnected and locked out.
- Access Solenoid: Locate and access the existing door release solenoid within the appliance. Refer to the specific appliance's service manual for exact location and access procedures.
- فحص المنطقة: Check the surrounding area for any signs of damage, corrosion, or wear that might affect the new solenoid's operation.
4.2 إجراء الاستبدال
- إزالة الملف اللولبي القديم: Carefully disconnect the electrical wiring from the old solenoid. Note the orientation and connection points. Remove any mounting hardware securing the old solenoid.
- تركيب الملف اللولبي الجديد: Position the new F300128P solenoid in the correct orientation. Secure it using the appropriate mounting hardware.
- توصيل الأسلاك: Reconnect the electrical wiring to the new solenoid, ensuring all connections are tight and correct. Verify that the solenoid is rated for the appliance's voltagهـ (110 فولت أو 220 فولت).
- وظيفة الاختبار: Before fully reassembling the appliance, temporarily restore power and test the door release mechanism to ensure the solenoid engages and disengages correctly.
- إعادة التجميع: Once functionality is confirmed, disconnect power again, and reassemble the appliance panels and covers.
- Final Power-Up: Restore main power to the appliance.
5. التشغيل
The F300128P solenoid operates automatically as part of the appliance's control system. When the control board sends an electrical signal, the solenoid's coil energizes, creating a magnetic field that pulls the plunger. This action mechanically actuates the door release or locking mechanism, allowing the door to be opened or secured as required by the appliance's cycle.
- Automatic Engagement: The solenoid engages or disengages based on the appliance's operational phase (e.g., door lock during wash cycle, door unlock at cycle completion).
- المجلدtagالتوافق ه: Designed for 110/220 Volt systems, ensuring broad compatibility with various Speed Queen, Huebsch, and Unimac models.
6. الصيانة
The F300128P solenoid is a robust component designed for durability. Regular maintenance is generally not required for the solenoid itself, but periodic inspection of its condition and surrounding components is recommended.
- التفتيش البصري: During routine appliance service, visually inspect the solenoid for any signs of physical damage, corrosion, or loose connections.
- فحص الأسلاك: Ensure all electrical wires connected to the solenoid are intact, securely fastened, and free from fraying or insulation damage.
- نظافة: Keep the area around the solenoid free from lint, dust, and debris that could impede its mechanical movement or cause overheating.
- اختبار الوظيفة: If accessible, periodically test the door release mechanism to ensure smooth and consistent operation.
If any issues are observed, refer to the Troubleshooting section or contact a qualified service technician.
7. استكشاف الأخطاء وإصلاحها
If the door release mechanism is not functioning correctly, the solenoid may be a contributing factor. Always ensure power is disconnected before inspecting components.
| الأعراض | السبب المحتمل | فعل |
|---|---|---|
| Door does not unlock or release. |
|
|
| Door does not lock or secure. |
|
|
| Burning smell or visible damage. | Overheating, short circuit, or component failure. | Immediately disconnect power. Replace the solenoid and inspect associated wiring for damage. |
إذا لم تُحل المشكلة باتباع خطوات استكشاف الأخطاء وإصلاحها، فاتصل بفني خدمة مؤهل.
8. المواصفات
- نموذج: ف300128ب
- ماركة: ALLIANCE LAUNDRY SYSTEMS
- وضع التشغيل: اوتوماتيكي
- لفائف المجلدtage: 110/220 Volts (Dual Voltage)
- الحد الأقصى لحجم التحويلtage: 220 فولت
- التقى المواصفات: الشركة المصنعة للمعدات الأصلية
- أبعاد الحزمة: 4.2 × 2.95 × 1.7 بوصة
- وزن: حوالي 6.88 أونصة
- National Stock Number (NSN): 5945-01-346-2341
- ASIN: B0034J3WFO
- الشركة المصنعة: أنظمة الغسيل التحالفية
- تاريخ التوفر الأول: 15 يناير 2010
- استبدال أرقام الأجزاء: F300112, F300112P, F300128
9. معلومات الضمان
Specific warranty details for the ALLIANCE LAUNDRY SYSTEMS Speed Queen F300128P Solenoid Door Relay are typically provided at the point of purchase or by the manufacturer. Please retain your proof of purchase. For warranty claims or inquiries, contact the authorized seller or Alliance Laundry Systems directly.
10. الدعم
For technical assistance, service, or parts inquiries regarding the F300128P Solenoid Door Relay, please contact Alliance Laundry Systems or an authorized service center. When contacting support, please have the model number (F300128P) and the serial number of your appliance available.
- الشركة المصنعة: أنظمة الغسيل التحالفية
- Webموقع: Refer to official Alliance Laundry Systems webموقع لمعلومات الاتصال.
