Jabra Pro 9400/900 Leather Ear Cushions

مقدمة

This manual provides instructions for the proper installation, use, and maintenance of your Jabra Pro 9400/900 Leather Ear Cushions, model 14101-19. These replacement ear cushions are designed to restore comfort and acoustic performance to your compatible Jabra headset. Please read these instructions carefully before proceeding.

معلومات هامة حول السلامة

Always handle the ear cushions with care. Keep small parts away from children to prevent choking hazards. Do not attempt to modify the ear cushions, as this may damage the product and void any warranty. Dispose of old ear cushions responsibly according to local regulations.

محتويات الحزمة

• 2 x Jabra Pro 9400/900 Leather Ear Cushions (Model 14101-19)

Setup: Ear Cushion Installation

Follow these steps to replace the ear cushions on your compatible Jabra Pro headset:

1. Remove Old Ear Cushions: Gently peel off the old ear cushion from the headset earpiece. It may be attached by a thin rim or adhesive. Discard the old cushion.
2. Prepare New Ear Cushion: Take one new ear cushion. Locate the soft, outermost ring of the cushion. This is the part that will secure onto the headset.
3. Attach New Ear Cushion: Align the outermost soft ring of the new ear cushion with the edge of the headset's earpiece. Hook a small section of the cushion's ring onto the earpiece.
4. Rotate and Secure: While holding the hooked section in place, slowly and carefully rotate the ear cushion around the earpiece, gradually working the entire soft ring onto the earpiece until it is fully seated and secure. Ensure there are no gaps and the cushion is flush with the headset.
5. Repeat for Second Cushion: If your headset uses two ear cushions, repeat the process for the other earpiece.

وسيلة مساعدة بصرية:

Image: A pair of Jabra Pro 9400/900 Leather Ear Cushions, model 14101-19, shown as replacement parts. This image illustrates the product you are installing.

التشغيل (الاستخدام)

Once installed, the ear cushions provide a comfortable interface between your ear and the headset speaker. They are designed for extended wear and contribute to the overall audio experience by providing a good seal. Ensure the headset is worn correctly for optimal comfort and sound quality.

صيانة

To ensure the longevity and hygiene of your ear cushions:

• تنظيف: Wipe the ear cushions periodically with a soft, damp cloth. Use mild soap if necessary, but avoid harsh chemicals or abrasive cleaners. Ensure the cushions are completely dry before use.
• تخزين: When not in use, store your headset in a clean, dry environment away from direct sunlight and extreme temperatures.
• تقتيش: Regularly inspect the ear cushions for signs of wear, tearing, or deterioration. Replace them if they become worn to maintain comfort and performance.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your ear cushions, consider the following:

• صعوبة التثبيت: If the cushion does not seat properly, ensure you are hooking the outermost soft ring onto the earpiece and rotating it slowly. Avoid forcing the cushion, as this can cause damage. Refer to the installation steps again.
• عدم ملاءمة/راحة: Ensure the ear cushions are fully and evenly seated on the headset. A poor fit can affect comfort and sound quality.
• تدهور المواد: Ear cushions are consumable items and will wear out over time with regular use. If the material is peeling or cracking, replacement is recommended.

تحديد

الضمان والدعم

Jabra products are designed for reliability. For specific warranty information regarding your ear cushions, please refer to the warranty documentation provided with your original Jabra headset or visit the official Jabra website. For technical support or further assistance, please contact Jabra customer service through their official support channels.

جابرا الرسمي Webموقع: www.jabra.com