دليل استخدام مؤقت وينكو الرقمي TIM-85D

مقدمة

This manual provides detailed instructions for the setup, operation, and maintenance of your Winco Digital Timer, model TIM-85D. Please read this manual thoroughly before using the device to ensure proper function and longevity.

الشكل 1: الجبهة view of the Winco Digital Timer TIM-85D, showing the display, HOUR, MIN, START/STOP, and RESET buttons.

يثبت

1. تركيب البطارية

1. حدد مكان حجرة البطارية في الجزء الخلفي من المؤقت.
2. افتح غطاء حجرة البطارية.
3. Insert one AAA battery (not included), ensuring the correct polarity (+/-) as indicated inside the compartment.
4. أغلق غطاء حجرة البطارية جيدًا.

2. التشغيل الأولي

The timer should automatically power on once the battery is correctly installed. The display will show '00:00'.

Figure 2: The Winco Digital Timer TIM-85D shown in hand, illustrating its compact dimensions of approximately 3.25 x 2.38 x 0.75 inches.

تعليمات التشغيل

1. ضبط المؤقت (العد التنازلي)

1. اضغط على ساعة button to set the desired hours. Each press increases the hour by one. Hold to rapidly advance.
2. اضغط على مين button to set the desired minutes. Each press increases the minute by one. Hold to rapidly advance.
3. To clear the set time, press the إعادة ضبط زر.

2. Starting and Stopping the Timer

1. After setting the desired time, press the البدء/التوقف اضغط على الزر لبدء العد التنازلي.
2. لإيقاف العد التنازلي مؤقتًا، اضغط على البدء/التوقف button again. The display will flash.
3. للاستئناف، اضغط على البدء/التوقف مرة أخرى.
4. When the countdown reaches zero, an alarm will sound. Press any button to silence the alarm.

3. Count-Up Function (Stopwatch)

1. Ensure the timer display is at '00:00' (press إعادة ضبط اذا كان ضروري).
2. اضغط على البدء/التوقف button. The timer will begin counting up from '00:00'.
3. To pause the count-up, press البدء/التوقف.
4. To reset the count-up timer to '00:00', press إعادة ضبط بينما توقفت.

4. Alarm and Silence Switch

The Winco Digital Timer features an audible alarm. Some models may include a silence switch, typically located on the side or back, to disable the alarm sound. Refer to your specific unit for this feature.

5. Additional Functions (Refer to Video)

The following video demonstrates various functions of a similar digital timer, including setting time, count-up/down, 1/100 second count, day count, and clock display. While the visual appearance of the timer in the video may differ from the Winco TIM-85D, the operational principles for these functions are generally applicable.

صيانة

1. التنظيف

امسح المؤقت بقطعة ناعمة، دamp قماش. لا تستخدم المنظفات الكاشطة أو تغمر الجهاز في الماء.

2. استبدال البطارية

When the display dims or the timer functions erratically, replace the AAA battery. Follow the battery installation steps outlined in the Setup section.

استكشاف الأخطاء وإصلاحها

• المؤقت لا يعمل: Ensure the battery is correctly installed with proper polarity and is not depleted. Replace the battery if necessary.
• العرض باهت أو فارغ: استبدال البطارية.
• إنذار لا يصدر صوتا: Check if your model has a silence switch and ensure it is in the 'on' or 'audible' position. Ensure the volume is not set to minimum if adjustable.
• الأزرار لا تستجيب: Remove and reinsert the battery to perform a soft reset. If the issue persists, the unit may require service.

تحديد

الضمان والدعم

معلومات الضمان

Winco products are designed for durability and performance. For specific warranty details, please refer to the packaging or contact Winco customer service. Keep your purchase receipt as proof of purchase.

دعم العملاء

For further assistance, technical support, or to inquire about replacement parts, please contact Winco customer service. Contact information can typically be found on the product packaging or the official Winco webموقع.