مقدمة
شكرا لك على الشراءasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
محتويات الحزمة
- Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
- بطاريات AAA × 2
- دليل المستخدم (هذا المستند)
المنتج انتهىview
The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.
This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.
يثبت
1. تركيب البطارية
- حدد مكان غطاء حجرة البطارية في الجزء الخلفي من ساعة المنبه.
- قم بإزالة الغطاء عن طريق سحبه أو فتحه برفق.
- أدخل بطاريتين (2) من نوع AAA، مع التأكد من القطبية الصحيحة (+ و -) كما هو موضح داخل الحجرة.
- أعد تركيب غطاء حجرة البطارية بشكل آمن.
2. التشغيل الأولي
Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.
تعليمات التشغيل
The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.
ضبط الوقت
- Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
- Press and hold the "SET" or "TIME" button until the hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
- Press the "SET" or "TIME" button again to move to the minute setting.
- Use the "+" and "-" buttons to adjust the minutes.
- Press "SET" or "TIME" one last time to confirm and exit time setting mode.
ضبط المنبه
- Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
- Press and hold the "ALARM" button until the alarm hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the alarm hour.
- Press the "ALARM" button again to move to the alarm minute setting.
- Use the "+" and "-" buttons to adjust the alarm minutes.
- Press "ALARM" one last time to confirm and exit alarm setting mode.
Using the On/Off Function
The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:
- Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
- Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
- Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.
To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.
EL الخلفية
To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.
Hourly Time Signal (Chime)
The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.
صيانة
- تنظيف: امسح الساعة بقطعة قماش ناعمة وجافة. لا تستخدم المنظفات الكاشطة أو المذيبات، لأنها قد تتلف الطلاء أو الشاشة.
- استبدال البطارية: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
- تخزين: إذا كنت ستقوم بتخزين الساعة لفترة طويلة، قم بإزالة البطاريات لمنع التسرب.
- بيئة: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or strong magnetic fields.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| العرض فارغ أو خافت. | بطاريات منخفضة أو ميتة؛ تركيب البطارية بشكل غير صحيح. | استبدل البطاريات ببطاريات AAA جديدة، وتأكد من القطبية الصحيحة. |
| لا يصدر صوت الإنذار. | Alarm is not set; clock is in "OFF" position; alarm volume is too low (if adjustable). | Ensure alarm time is set correctly; rotate clock to "ON" position; check for volume controls if applicable. |
| الوقت غير صحيح. | Time was not set correctly; power interruption (if not battery-backed). | Reset the time according to the "Setting the Time" instructions. |
تحديد
- نموذج: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
- ماركة: ليكسون
- نوع العرض: شاشات الكريستال السائل الرقمية
- مصدر الطاقة: 2 بطاريات AAA
- مادة: ABS (أكريلونيتريل بوتادين ستايرين)
- الأبعاد (العرض × العمق × الارتفاع): 5.3 × 1.4 × 3.1 بوصة (13.5 × 3.5 × 8 سم)
- وزن: 0.13 كجم (4.6 أونصة)
- المميزات الخاصة: On/Off 3 Position Function, EL Backlight, Hourlذ إشارة الوقت
- نوع التركيب: سطح الطاولة
- بلد المنشأ: الصين
الضمان والدعم
Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon webيرجى الاحتفاظ بإثبات الشراء الخاص بك لأي مطالبات بالضمان.
For further assistance, you may contact Lexon customer support through their official channels.
