RadioShack 15-2147

RadioShack 3-in-1 Universal Remote Control User Manual

نموذج: شنومكس-شنومكس

مقدمة

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your RadioShack 3-in-1 Universal Remote Control, Model 15-2147. This remote is designed to consolidate the control of up to three different audio/video devices, such as a television (TV), VCR/DVD player, and cable/satellite box (CBL/SAT), into a single convenient unit.

المنتج انتهىview

RadioShack 3-in-1 Universal Remote Control

Figure 1: RadioShack 3-in-1 Universal Remote Control, Model 15-2147

The RadioShack 3-in-1 Universal Remote features a logical button layout for intuitive control of your devices. Below is a description of the key buttons and their functions:

يثبت

1. تركيب البطارية

  1. افتح غطاء حجرة البطارية في الجزء الخلفي من جهاز التحكم عن بعد.
  2. Insert two (2) fresh AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
  3. أغلق غطاء حجرة البطارية جيدًا.

2. برمجة جهاز التحكم عن بعد

To control your devices, the universal remote must be programmed with the correct codes for your specific brands and models. Refer to the code list provided with your remote (not included in this manual) or visit the RadioShack support website for programming instructions and codes.

General Programming Steps (may vary):

  1. قم بتشغيل الجهاز الذي ترغب في برمجته (مثل التلفزيون).
  2. Press and hold the device button you want to program (e.g., TV) until the indicator light stays on.
  3. Enter the 3 or 4-digit code for your device's brand.
  4. If the device turns off, the code is correct. If not, try the next code for your brand.
  5. حرر زر الجهاز.
  6. Repeat for other devices (VCR/DVD, CBL/SAT).

تعليمات التشغيل

Selecting a Device

Before operating a device, you must select it on the remote. Press the corresponding device button (TV, VCR/DVD, or CBL/SAT) once. The indicator light will briefly flash to confirm your selection.

الوظائف الأساسية

Playback Functions (for VCR/DVD/DVR)

صيانة

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
لا يقوم جهاز التحكم عن بعد بتشغيل الجهاز.
  • تم اختيار جهاز غير صحيح.
  • Batteries are weak or incorrectly installed.
  • لم تتم برمجة جهاز التحكم عن بعد بشكل صحيح.
  • وجود عائق بين جهاز التحكم عن بعد والجهاز.
  • Press the correct device button (TV, VCR/DVD, CBL/SAT).
  • استبدل البطاريات وتأكد من صحة القطبية.
  • Reprogram the remote using the correct code for your device.
  • Ensure a clear line of sight to the device's infrared sensor.
بعض الأزرار لا تعمل.
  • Remote not fully programmed.
  • Button function not supported by device.
  • جرب رمزًا مختلفًا لجهازك.
  • Verify if the specific function is available on your device's original remote.
لا يومض ضوء المؤشر.
  • البطاريات الميتة.
  • تم تركيب البطاريات بشكل غير صحيح.
  • استبدال البطاريات.
  • تحقق من قطبية البطارية.

تحديد

الضمان والدعم

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official RadioShack support webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.