Behringer V-TONE ACOUSTIC DRIVER DI ADI21 Instruction Manual

مقدمة

The Behringer V-TONE ACOUSTIC DRIVER DI ADI21 is an acoustic amp modeler, direct recording preamp, and DI box designed to enhance and optimize the sound of your acoustic guitar. This versatile pedal provides authentic tube/microphone modeling, a 3-band EQ with sweepable mids, and dual DI modes for various live and recording applications. This manual provides essential information for setting up, operating, and maintaining your ADI21 unit.

الميزات الرئيسية

• Analog modeling acoustic guitar preamp/stompbox with DI recording output.
• Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos.
• Super-high impedance to retain maximum signal integrity and dynamics.
• Authentic tube/microphone modeling circuitry provides the natural warmth and presence as if your acoustic guitar was miked through a tube pre-amp.
• Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode.

يثبت

فك التعبئة والتفتيش

Carefully unpack your ADI21 unit. The package should contain one Acoustic Amp Modeler/Preamp/DI. Inspect the unit for any signs of damage during transit. If any damage is found, contact your dealer immediately.

مزود الطاقة

The ADI21 can be powered by a 9V battery or an optional 9V DC power adapter. To conserve battery life, always disconnect the input cable when the unit is not in use.

• تركيب البطارية: Open the battery compartment on the underside of the unit. Connect a 9V battery (not included) to the battery clip and place it inside the compartment. Close the cover securely.
• محول طاقة تيار مستمر: Connect an optional 9V DC power adapter (center negative) to the DC IN jack.

الاتصالات

قم بتوصيل غيتارك الصوتي بـ مدخل jack. Use the الناتج jack to connect to your amplifier or other effects pedals. For direct recording or connection to a PA system, use the balanced إخراج DI مقبس (XLR).

صورة: مؤخرة view of the Behringer ADI21 showing the input, output, and DI output jacks.

This image displays the rear panel of the ADI21, highlighting the 1/4-inch input and output jacks, as well as the balanced XLR DI output for professional connections.

الإعدادات الأولية

For a starting point, set all tone controls (TREBLE, MID, BASS) to the 12 o'clock position. Set the LEVEL knob to a moderate level. The BLEND knob can be started at 12 o'clock. Adjust the PAD and GND LIFT switches as needed based on your signal and environment.

التشغيل

ضوابط أكثرview

صورة: أمام view of the Behringer ADI21 showing all control knobs and switches.

هذه الصورة توفر صورة واضحة view of the pedal's top panel, detailing the layout of the TREBLE, MID, BASS, LEVEL, MID FREQ, and BLEND knobs, along with the PAD and GND LIFT switches.

• ثلاثية: Adjusts the high-frequency content of your sound. Turn clockwise for brighter tones, counter-clockwise for warmer, darker tones.
• منتصف: Controls the mid-range frequencies. This knob works in conjunction with the MID FREQ knob.
• صوت عميق: Adjusts the low-frequency content. Turn clockwise for more bass, counter-clockwise to reduce boominess.
• مستوى: يحدد مستوى الصوت الإجمالي للدواسة.
• منتصف التكرار: Selects the specific mid-frequency point (from 200 Hz to 2 kHz) that the MID knob will affect. This is crucial for targeting and eliminating feedback frequencies.
• يمزج: Mixes the processed (modeled) signal with your original direct signal. Turn clockwise for more modeled sound, counter-clockwise for more direct sound.
• PAD Switch (-20dB): Engages a -20dB attenuation pad. Use this if your input signal is too hot and causing distortion.
• مفتاح رفع الأرضي: Lifts the ground connection of the DI output to eliminate ground loop hum.
• التبديل القدم: Toggles the effect on/off. When the effect is active, the LED indicator will light up.

سيناريوهات الاستخدام

• صوتي Amp Modeling: Use the TREBLE, MID, BASS, and BLEND controls to sculpt your desired acoustic guitar tone. Experiment with the MID FREQ knob to find the sweet spot for your instrument.
• Direct Recording/PA: Connect the XLR DI OUTPUT directly to a mixing console or audio interface. Adjust the LEVEL and tone controls to achieve a balanced and clear signal.
• مراقبة ردود الفعل: If you experience feedback, use the MID FREQ knob to pinpoint the problematic frequency and then use the MID knob to cut that frequency. The BLEND control can also help manage feedback by reducing the amount of modeled signal.

صيانة

• تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف الجهاز. لا تستخدم المنظفات السائلة أو المذيبات.
• تخزين: Store the ADI21 in a dry, cool environment away from direct sunlight and extreme temperatures.
• استبدال البطارية: If using battery power, replace the 9V battery when the LED indicator becomes dim or the sound quality degrades. Always remove the input cable when not in use to prevent battery drain.

استكشاف الأخطاء وإصلاحها

• لا يوجد صوت: Check all cable connections, ensure the unit is powered (battery or adapter), and verify that the LEVEL knob is not set to minimum.
• همهمة أو ضجيج: Engage the GND LIFT switch. Ensure all cables are properly shielded. Check for faulty power adapters or ground loops in your setup.
• تشويه: If the signal is distorting, engage the PAD switch. Reduce the input level from your guitar or adjust the gain settings on your ampمكبر / خلاط.
• اشارة ضعيفة: Check the battery level if using battery power. Ensure all connections are secure and the LEVEL knob is set appropriately.

تحديد

الضمان والدعم

Behringer products are designed to provide reliable performance. For detailed warranty information and technical support, please refer to the warranty card included with your product or visit the official Behringer webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.