Graphtec IJ-91001MBK Matte Black Ink Cartridge User Manual

1. المقدمة

This manual provides essential instructions for the safe and effective use of your Graphtec IJ-91001MBK Matte Black Ink Cartridge. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your printer and ink cartridge.

2. انتهى المنتجview

The Graphtec IJ-91001MBK is a genuine Matte Black ink cartridge designed for specific Graphtec large-format printers. It contains 130ml of high-quality pigment-based ink, formulated to deliver sharp, durable, and fade-resistant prints.

Figure 2.1: Graphtec IJ-91001MBK Matte Black Ink Cartridge. This image displays the ink cartridge packaging, highlighting the matte black color and Graphtec branding.

3. التوافق

This ink cartridge is compatible with the following Graphtec printer models:

• Graphtec JW331
• Graphtec JW330
• Graphtec JW350
• Graphtec JW501
• Graphtec JW500
• Graphtec JW550

Using this cartridge with incompatible models may result in damage to the printer or poor print quality.

4. الإعداد والتثبيت

Follow these general steps to install the Graphtec IJ-91001MBK ink cartridge. Refer to your specific printer's user manual for detailed, model-specific instructions.

1. تجهيز الطابعة: Ensure your printer is powered on and in a ready state. Open the ink cartridge access cover.
2. إزالة الخرطوشة القديمة (إن وجدت): If replacing an empty cartridge, gently press the release tab and pull the old cartridge straight out. Dispose of it responsibly according to local regulations.
3. فك عبوة الخرطوشة الجديدة: Carefully remove the new Graphtec IJ-91001MBK ink cartridge from its packaging. Avoid touching the electrical contacts or the ink nozzle.
4. رجّ برفق: Gently shake the cartridge horizontally a few times to distribute the ink evenly.
5. Remove Protective Cap/Seal: Remove any protective tape or cap from the ink cartridge as indicated in your printer's manual. Be careful not to spill any ink.
6. أدخل خرطوشة جديدة: Align the new cartridge with the correct slot in the printer. Push it firmly until it clicks into place. Ensure it is securely seated.
7. إغلاق الغطاء: Close the ink cartridge access cover. The printer may perform an initial ink charging or alignment process.
8. تأكيد التثبيت: Check the printer's display or status lights to confirm that the new ink cartridge is recognized and ready for use.

5. تعليمات التشغيل

Once the Graphtec IJ-91001MBK ink cartridge is correctly installed, your printer is ready to produce high-quality prints. Follow your printer's standard operating procedures for printing documents or images.

• إعدادات الطباعة: For optimal results with matte black ink, ensure your printer's software settings are configured for the appropriate media type and print quality.
• مستويات الحبر: Monitor ink levels through your printer's utility software. Replace the cartridge when the low ink warning appears to avoid interruptions during critical print jobs.
• تنظيف رأس الطباعة: If print quality degrades (e.g., streaks, missing lines), perform a print head cleaning cycle through your printer's maintenance menu.

6. الصيانة

Proper maintenance ensures consistent print quality and extends the life of your ink cartridge and printer.

• تخزين: قم بتخزين خراطيش الحبر غير المستخدمة في عبواتها الأصلية المغلقة في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• التعامل: Handle cartridges carefully to prevent damage to the nozzle or electrical contacts.
• الاستخدام المنتظم: Use your printer regularly to prevent ink from drying out in the print head nozzles. If the printer is idle for extended periods, perform a test print periodically.
• تنظيف: Do not attempt to clean the ink cartridge nozzles manually with harsh chemicals or abrasive materials. Use the printer's built-in cleaning functions.

7. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your ink cartridge.

7.1. Poor Print Quality (Streaks, Fading, Incorrect Colors)

• التحقق من مستويات الحبر: Verify that the Matte Black ink cartridge is not low or empty. Replace if necessary.
• Perform Print Head Cleaning: Use your printer's utility software to perform a print head cleaning cycle. You may need to run it multiple times.
• Perform Print Head Alignment: If prints are misaligned, perform a print head alignment from your printer's maintenance menu.
• Check Media Type: Ensure the correct paper type is selected in your printer settings.
• فحص الخرطوشة: Remove and re-insert the cartridge to ensure it is seated correctly. Check for any visible damage or blockages on the nozzle area (do not touch).

7.2. لم يتم التعرف على الخرطوشة

• Re-install Cartridge: Remove the cartridge and re-insert it firmly until it clicks into place.
• اتصالات نظيفة: With the printer off, gently wipe the electrical contacts on the cartridge and inside the printer with a lint-free cloth slightly dampened with distilled water. Allow to dry completely before re-inserting.
• أعد تشغيل الطابعة: Turn off the printer, unplug it for a few minutes, then plug it back in and turn it on.
• التحقق من التوافق: Ensure you are using the correct Graphtec IJ-91001MBK cartridge for your specific printer model.

7.3. Ink Leakage

• فحص الضرر: Check the cartridge for any cracks or visible damage.
• التثبيت الصحيح: Ensure the cartridge is installed correctly and not forced into the slot.
• اتصل بالدعم: If leakage persists, discontinue use and contact Graphtec customer support.

8. المواصفات

9. الضمان والدعم

For information regarding the warranty of your Graphtec IJ-91001MBK ink cartridge, please refer to the warranty documentation provided with your Graphtec printer or visit the official Graphtec website. For technical support or further assistance, please contact Graphtec customer service directly.

Note: Use of non-genuine Graphtec ink cartridges may void your printer's warranty.