مقدمة
This instruction manual provides detailed guidance for the proper installation and use of the Teac RM-860 Rack Mount Kit. This kit is designed to securely integrate your Teac W860R or W790R cassette deck into a standard 19-inch audio equipment rack, ensuring a stable and organized setup for your studio or home audio system.
Please read this manual thoroughly before beginning installation to ensure correct assembly and to prevent any potential damage to your equipment.
الإعداد والتثبيت
The Teac RM-860 Rack Mount Kit includes two rack ears and the necessary mounting hardware. Follow these steps to install your cassette deck into a rack.
Image: The Teac RM-860 Rack Mount Kit, showing the two L-shaped metal brackets (rack ears) and a small collection of screws and washers. The brackets are black with pre-drilled holes for mounting.
- Prepare the Cassette Deck: Ensure your Teac W860R or W790R cassette deck is powered off and disconnected from all cables.
- تحديد نقاط التثبيت: Locate the screw holes on the sides of your cassette deck chassis. These are specifically designed for attaching rack mount ears.
- Attach Rack Ears: Align one rack ear with the mounting holes on one side of the cassette deck. Use the provided screws to securely fasten the rack ear to the deck. Do not overtighten. Repeat this process for the second rack ear on the opposite side of the cassette deck.
- Prepare the Equipment Rack: Ensure your 19-inch audio equipment rack has sufficient space and is stable. Identify the desired mounting position within the rack.
- Mount the Deck in the Rack: Carefully lift the cassette deck with the attached rack ears. Align the holes on the rack ears with the corresponding holes on the rack rails. Use appropriate rack screws (typically M6 or 10-32, often supplied with the rack itself, not this kit) to secure the deck to the rack rails. Secure both the front and, if applicable, the rear of the rack ears to the rack for maximum stability.
- التحقق من الاستقرار: Gently test the installed deck to ensure it is firmly secured within the rack and does not wobble.
- إعادة توصيل الكابلات: Once securely mounted, reconnect all necessary audio and power cables to your cassette deck.
الاستخدام
The Teac RM-860 Rack Mount Kit is a passive component designed to provide a secure and organized mounting solution for your Teac W860R or W790R cassette deck within a standard 19-inch equipment rack. Once installed, the kit facilitates the integration of your cassette deck into a professional audio setup, allowing for efficient cable management and protection of the unit.
No specific operational procedures are required for the rack mount kit itself beyond its initial installation. The functionality of your cassette deck remains unchanged.
صيانة
The Teac RM-860 Rack Mount Kit requires minimal maintenance. The metal construction is durable and designed for long-term use.
- تنظيف: If necessary, wipe the rack ears with a soft, dry cloth to remove dust or smudges. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- إحكام المسمار: Periodically check the tightness of all mounting screws (both those attaching the ears to the deck and those attaching the deck to the rack) to ensure they remain secure. Vibration or movement over time can sometimes loosen screws.
استكشاف الأخطاء وإصلاحها
Most issues related to the rack mount kit are minor and can be resolved with simple checks.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Deck does not fit into rack. | Incorrect rack size or misaligned rack ears. | Ensure you are using a standard 19-inch equipment rack. Verify that the rack ears are correctly attached to the deck and are not bent. |
| Deck feels loose in the rack. | البراغي غير مشدودة بشكل كافٍ. | Tighten all screws connecting the rack ears to the deck and the deck to the rack rails. Do not overtighten. |
| اجزاء مفقودة. | Kit was incomplete upon unboxing. | Contact Teac customer support or your retailer for assistance with missing components. |
تحديد
- نموذج: ر م-860
- التوافق: Teac W860R, Teac W790R Cassette Decks
- Rack Standard: Designed for standard 19-inch equipment racks
- أبعاد الحزمة: 11.4 × 5.8 × 1.3 بوصة
- وزن السلعة: 1.9 رطل
- الشركة المصنعة: مركز تاك
الضمان والدعم
For information regarding the warranty of your Teac RM-860 Rack Mount Kit, please refer to the warranty documentation provided at the time of purchase or visit the official Teac webقد تختلف شروط وأحكام الضمان حسب المنطقة والتاجر.
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Teac customer support:
- Teac Official Webموقع: www.teac.com (Check for regional support contacts)
- خدمة العملاء: يرجى الرجوع إلى معلومات الاتصال المقدمة على الموقع الرسمي webموقع إلكتروني لأرقام الهواتف أو الدعم عبر البريد الإلكتروني.
Please have your product model number (RM-860) and purchase details ready when contacting support.
