دليل مستخدم وحدة تحكم LED بتقنية بلوتوث/واي فاي RGB SPI من Xnbada SP318E SP528E SP668E

1. المقدمة

Thank you for choosing the Xnbada SP318E, SP528E, or SP668E RGB SPI LED Controller. These advanced controllers are designed to provide efficient and flexible connectivity for your LED strip lights, offering intuitive app control, powerful customization features, and dynamic lighting effects. This manual will guide you through the setup, operation, and maintenance of your controller.

2. معلومات السلامة

تأكد من مستوى الصوت المدخلtage (DC5V-DC24V) matches the requirements of your LED strip and controller. Incorrect voltagه يمكن أن تلحق الضرر بالجهاز.
Do not expose the controller to moisture or extreme temperatures.
افصل الطاقة قبل إجراء أي توصيلات أو فصل.
يحفظ بعيدًا عن متناول الأطفال.
لا تحاول تفكيك وحدة التحكم أو تعديلها.

3. محتويات العبوة

يرجى التحقق من الحزمة للتأكد من وجود جميع العناصر:

Xnbada SPI RGB LED Controller (SP318E, SP528E, or SP668E model)
2.4G RF Remote Control (for SP668E model)

Figure 1: SP668E Controller and RF Remote Control. This image shows the compact white LED controller with a QR code and model number, connected to a white cable, alongside a white 2.4G RF remote control with various color and function buttons.

4. المواصفات

General Controller Specifications:

نوع الصمام: SPI RGBIC-Chip LED-Strip
حجم الإدخالtage: DC5V-DC24V (Voltage depends on the LED strip)
درجة حرارة العمل: -10 درجة مئوية إلى 60 درجة مئوية
مصدر الطاقة: DC
مادة: نظام ABS
تردد التذبذب: 2.4 جيجاهرتز
وضع الاتصال: Bluetooth / WIFI
Controlled Method: Bluetooth / WIFI / Remote
Applicable Lights: WS2811, WS2812B, WS2813, WS2815, SM16703, UCS1903, 1914, 1934

المواصفات الخاصة بالطراز:

Figure 2: Controller Model Specification Table. This table provides a detailed comparison of the SP668E, SP528E, and SP318E controllers.

مواصفة	SP668E (SPI RGB BT Led Controller)	SP528E (SPI RGB IoT Led Controller)	SP318E (MESH Group SPI RGB LED Controller)
نوع البيانات	إس بي آي	إس بي آي	إس بي آي
العمل المجلدtage	5-24 فولت	5-24 فولت	5-24 فولت
التيار العامل	14 مللي أمبير-20 مللي أمبير	12 مللي أمبير-35 مللي أمبير	10 مللي أمبير-35 مللي أمبير
نوع الدائرة المتكاملة	دائرة متكاملة لمحرك LED RGB RZ أحادي السلك	-	Single-wire RZ RBG LED driver IC
أقصى عدد من البكسلات	600	1200	900
درجة حرارة العمل	-10 درجة مئوية-60 درجة مئوية	-10 درجة مئوية-60 درجة مئوية	-10 درجة مئوية-60 درجة مئوية
البعد	103 مم45 مم8.5 مم	56 مم21 مم12 مم	60 مم30 مم14 مم

Remote Control Parameters (for SP668E):

حجم الإدخالtage: 3V (CR2025 battery, not included)
التيار الثابت: 4 ميكرو أمبير
الانتقال: 2.4 جيجا
المسافة البعيدة: Max 30m (open space)

Remote Control Parameters and Binding Instructions — Figure 3: SP668E Controller and Remote Control with parameters. This image displays the SP668E controller and its remote, detailing the remote's specifications and instructions for binding and unbinding.

5. الإعداد والتثبيت

توصيل الطاقة: Connect a DC power supply (5V-24V, matching your LED strip's voltage) to the controller's DC input port.
توصيل شريط إضاءة LED: Connect your compatible SPI RGB LED strip to the controller's output port. Ensure the DAT, VCC, and GND connections are correct.
Install App (BanlanX): For app control, download the 'BanlanX' app from your device's app store (supports Android and iOS).
Pair Remote Control (SP668E only):
- ملزم: Within 20 seconds after the controller is powered on, long press the 'ON' button on the remote control to bind. The white light will breathe 3 times to indicate successful binding.
- إلغاء الارتباط: To unbind the remote control, first turn off the lights completely. Then, long press the 'OFF' button on the remote control to clear all bound remote controls. The white light will pulse 1 time to confirm.

SP318E Controller DC Power and LED Connector — Figure 4: SP318E Controller showing DC Power input and LED strip connector. This image highlights the power input port and the connector for the LED strip on the SP318E controller.

6. التشغيل

6.1. Remote Control (SP668E only)

The 2.4G RF remote control provides convenient access to various lighting functions. Ensure the remote has a CR2025 battery installed.

Detailed Remote Control Functions Diagram — Figure 5: Detailed diagram of the RF remote control buttons and their functions for the SP668E. This image labels each button on the remote, explaining its purpose for controlling the LED lights.

تشغيل/إيقاف: اضغط لفترة قصيرة لتشغيل الضوء أو إيقاف تشغيله.
السطوع +/-: اضبط مستوى سطوع الأضواء.
السرعة +/-: اضبط سرعة التأثيرات الديناميكية.
الوضع +/-: التنقل بين أوضاع الإضاءة الديناميكية المختلفة.
وضع الموسيقى: Activate sound-responsive lighting effects.
Collected Effect Cycle: Cycle through saved or collected effects.
اختيار اللون: Direct access buttons for White, Yellow, Cyan, Red, Pink, Green, Blue, and Color +/- for fine-tuning.
إطفاء الأنوار في الوقت المناسب: Short press to cycle through timer settings (60 min, 90 min, 120 min). Long press to close the timer.

6.2. App Control (BanlanX App)

The BanlanX app offers comprehensive control and customization for all controller models (SP318E, SP528E, SP668E).

BanlanX App Interface Exampليه — Figure 6: Screenshots of the BanlanX app interface showing dynamic, solid, music, and DIY lighting modes. This image displays various screens within the app, illustrating options for color selection, effect customization, and mode switching.

Intuitive UI: Visual interface for easy selection and customization of light effects.
التأثيرات الديناميكية: Choose from 30 built-in dynamic effects to create immersive scenes.
تأثيرات الموسيقى: Sync your lights to music with sound-responsive modes.
خيارات التنفيذ الذاتي: Create and save your own custom lighting effects, including solid colors and gradients.
Customizable Adjustments: Fine-tune brightness, speed, direction, and color.
Scheduled ON/OFF: Set timers for automatic power on/off.
إعادة الاتصال التلقائي: Devices automatically reconnect to the app.
تحديثات عبر الهواء: Keep your controller updated with the latest features and enhancements.

Dynamic, Music, and Customizable Adjustments — الشكل 7: المثال البصريamples of dynamic effects, music effects, and customizable adjustments for LED strips. This image shows three panels illustrating different lighting scenarios: dynamic effects in a living room, music effects with people playing guitar, and a desk setup with highly customizable lighting.

6.3. Voice Control (SP528E only)

The SP528E controller supports smart speaker voice control, compatible with popular platforms.

Smart Speaker Voice Control Compatibility — Figure 8: Smart speaker voice control compatibility. This image shows a person interacting with smart lighting via voice commands, with icons for Google Home, Amazon Alexa, Xiaodu, and Xiaoai, indicating compatibility.

Seamlessly integrate with Google Home, Amazon Alexa, Xiaodu, and Xiaoai for voice commands.
Control your lighting by simply speaking commands like "Hey Google, turn on the bedroom light" or "Alexa, set the bedroom light to Purple."

6.4. MESH Networking Technology (SP318E only)

The SP318E controller utilizes advanced MESH networking for enhanced connectivity and reliability.

MESH Networking Technology Diagram — Figure 9: Diagram illustrating MESH Networking Technology for multi-device control. This image shows multiple controllers connected in a mesh network, controlling lights in various settings like a courtyard, public square, and hypermarket, emphasizing stable and reliable connections.

اتصال مرن: Efficient and flexible multi-device networking.
موثوقية عالية: Centralized mesh topology ensures device disruptions do not affect overall communication.
Large Group Support: A single group can connect up to 200 devices with intelligent data path switching.
تحكم متعدد الاستخدامات: Switch freely between individual and group control.

7. الصيانة

Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
تجنب استخدام المواد الكيميائية القاسية أو المنظفات الكاشطة.
تأكد من وجود تهوية مناسبة حول وحدة التحكم لمنع ارتفاع درجة الحرارة.
For the remote control, replace the CR2025 battery when its performance degrades.

8. استكشاف الأخطاء وإصلاحها

الأضواء لا تعمل: Check power connections to both the controller and the LED strip. Ensure the input voltage matches the LED strip's requirements.
Remote control not working (SP668E): Check the remote control battery (CR2025). Ensure the remote is properly bound to the controller (refer to Section 5.4).
مشاكل اتصال التطبيق: Ensure Bluetooth/Wi-Fi is enabled on your smartphone. Restart the app and the controller. Make sure the controller is within range.
Inconsistent lighting effects: Verify that the LED strip type is compatible with the controller. Check for loose connections between the controller and the LED strip.
Voice control not responding (SP528E): Ensure your smart speaker is properly linked to the BanlanX app and the controller. Check your internet connection.

9 نصائح المستخدم

Always double-check your wiring before applying power to prevent damage to the LED strip or controller.
For optimal performance, place the controller in an area with good signal reception for Bluetooth/Wi-Fi and remote control.
Explore the DIY features in the BanlanX app to create unique lighting scenes tailored to your preferences.

10. الضمان والدعم

This product comes with a 1-year warranty. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

الشهادات:

سي سي سي
CE
لجنة الاتصالات الفيدرالية
بنفايات
UL

شهادات المنتج — Figure 10: Product certification documents. This image displays certificates for RoHS, CE, and FCC compliance, indicating the product meets various international standards.

Xnbada SP318E, SP528E, SP668E