Aqara Light Sensor T1 User Manual

1. المقدمة

The Aqara Light Sensor T1 is an advanced smart home device designed to detect ambient light changes and illuminance levels. Utilizing the Zigbee 3.0 wireless communication protocol, it seamlessly integrates into your smart home ecosystem, enabling intelligent automation and control of other connected devices. Its compact and versatile design allows for multiple installation methods, making it suitable for various applications within your home.

إشعارات هامة:

• When connecting, please ensure the region of your Aqara Home APP is set to "China".
• This product requires a Zigbee 3.0 gateway to function.
• The Aqara Light Sensor T1 is compatible with Aqara Home APP and Apple Homekit. It does not work with Mi Home APP.

2. معلومات السلامة

• هذا المنتج مخصص للإستخدام الداخلي فقط.
• لا تعرض الجهاز للرطوبة أو درجات الحرارة القصوى.
• يحفظ بعيدًا عن متناول الأطفال.
• لا تحاول تفكيك الجهاز أو إصلاحه بنفسك.
• Ensure the installation surface is clean and dry for proper adhesion.

3. محتويات العبوة

• Aqara Light Sensor T1
• دليل المستخدم
• Adhesive sticker (pre-attached or separate)

4. المواصفات

5. الإعداد

5.1 التثبيت المادي

The Aqara Light Sensor T1 offers multiple installation methods due to its compact design and magnetic properties:

1. Direct Placement: Place the sensor directly in the desired position on a flat surface.
2. الامتزاز المغناطيسي: Adsorb the sensor to any metal surface.
3. التثبيت اللاصق: Tear off the adhesive protective film (the attachment is equipped with a round adhesive tape) and paste it in the required detection area. Ensure the surface is clean and dry for optimal adhesion.

5.2 Connecting to Aqara Home APP

Follow these simple three steps to connect your Light Sensor T1 to the Aqara Home APP:

1. Open the Aqara Home APP. Click on the "+" icon in the upper right corner of the home screen. Select "Light Sensor T1" from the device list.
2. Press the reset button on the sensor for a long time until the blue light flickers 3 times, then release it.
3. The Gateway will provide a voice prompt indicating that the device has been successfully added.

Remember, this product needs to be used with devices that have Zigbee 3.0 Gateway functionality, such as an Aqara Gateway M1S.

6. تعليمات التشغيل

The Aqara Light Sensor T1 intelligently perceives light changes and illuminance, allowing for various smart home automations:

6.1 Automatic Curtain Control (Intimate Butler)

When strong sunlight is detected, the light sensor can be linked with an intelligent curtain motor to automatically close curtains, preventing damage to furniture and cosmetics from excessive sun exposure. When sunlight weakens, the curtains can automatically open.

6.2 Energy-Saving Assistant

If the indoor light is sufficient, the light sensor can automatically turn off connected lighting, contributing to energy saving and environmental protection.

6.3 Eye Protection Expert

When reading in the living room or when a child is studying, the light sensor can sensitively detect if the light is fading and automatically adjust or turn on lights to maintain optimal brightness, protecting eyesight.

6.4 Zigbee 3.0 Protocol Benefits

The sensor supports the powerful Zigbee 3.0 protocol, offering:

• Higher Security: Enhanced data encryption and protection.
• Openness: Greater compatibility with various smart home devices.
• Complete Solution: Comprehensive integration capabilities.
• More Stable Network: Reliable and consistent connectivity.
• استهلاك منخفض للطاقة: Extended battery life.

6.5 فيديو توضيحي للمنتج

7. الصيانة

7.1 التنظيف

To clean the sensor, gently wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the device.

7.2 استبدال البطارية

The Aqara Light Sensor T1 uses a CR2450 battery. When the battery level is low, you may receive a notification in the Aqara Home APP. To replace the battery:

1. افتح المستشعر ج بحذرasing.
2. قم بإزالة بطارية CR2450 القديمة.
3. أدخل بطارية CR2450 جديدة، مع ضمان القطبية الصحيحة.
4. أغلق المستشعر جasinج بشكل آمن.

8. استكشاف الأخطاء وإصلاحها

• الجهاز غير متصل: Ensure your Aqara Home APP region is set to "China". Verify that you have a Zigbee 3.0 gateway and that it is powered on and connected to your network. Try resetting the sensor and re-pairing it.
• قراءات غير دقيقة: Ensure the sensor lens is clean and unobstructed. Avoid placing the sensor in direct sunlight or near strong artificial light sources that might interfere with readings.
• عمر بطارية قصير: While the typical battery life is 2 years, frequent reporting or extreme environmental conditions might reduce it. Ensure you are using a fresh, high-quality CR2450 battery.
• Not responding to automation: Check the automation rules in your Aqara Home APP or Apple Homekit. Ensure the gateway is online and the sensor is within its communication range.

9 نصائح المستخدم

• الوضع الأمثل: For best results in light detection, place the sensor in an area that accurately represents the ambient light conditions you wish to monitor, away from direct light sources that might skew readings.
• Automation Integration: Experiment with different automation scenarios in the Aqara Home APP or Apple Homekit. For example, link the light sensor to smart bulbs to automatically adjust brightness based on natural light, or to smart plugs controlling lamps.
• مراقبة البطارية: Regularly check the battery status through the Aqara Home APP to ensure continuous operation and avoid unexpected disconnections.

10. الضمان والدعم

Aqara products are designed for reliability and performance. For warranty information, please refer to the specific terms and conditions provided at the time of purchase or contact your local Aqara distributor. For technical support or further assistance, please visit the official Aqara webالموقع أو الاتصال بخدمة العملاء الخاصة بهم.