Benton Portable 4G Router User Manual

1. انتهى المنتجview

Thank you for choosing the Benton LTE MiFi Portable 4G Router. This device provides portable Wi-Fi connectivity, allowing you to share internet access from a 4G/5G SIM card with multiple devices. It features a compact design, a clear LCD screen for data display, and a built-in battery for on-the-go use.

المميزات الرئيسية:

• الاتصال: Supports 4G LTE (FDD and TDD bands) and 3G WCDMA.
• واي فاي القياسية: M126T features WiFi6 (802.11ax), M100 features WiFi4 (802.11 b/g/n).
• سرعة: Up to 150Mbps 2.4G Wi-Fi Transmission Rate.
• بطارية: Available with 3000mAh or 2050mAh battery options.
• قابلية النقل: Compact and lightweight design, ideal for travel, SOHO, and outdoor activities.
• عرض: 1.44-inch LCD screen for clear data display.
• حماية: Supports WPA/WPA2 security protocols.
• دعم الجهاز: Connects up to 10 wireless devices simultaneously.
• وظائف إضافية: USB Network Sharing (charging + data), Manual Network Selection, SMS Function.

محتويات الحزمة:

تتضمن الحزمة عادةً ما يلي:

• 1 x M126T Router (or M100 Router, depending on model)
• 1 × كابل شحن (USB-C)
• 1 × دليل المستخدم (هذه الوثيقة، أو نسخة مطبوعة)

2. دليل الإعداد

2.1. البدء

This guide provides the basic operations of the MiFi. For advanced configuration, log into the web واجهة مستخدم رسومية وانقر فوق رمز المساعدة في الزاوية اليمنى العليا.

2.2. Install SIM Card and Battery

1. قم بإيقاف تشغيل MiFi. Ensure the device is completely turned off before proceeding.
2. قم بإزالة الغطاء الخلفي والبطارية. Gently pry open the back cover and remove the battery.
3. أدخل بطاقة SIM في فتحة البطاقة في الموضع الصحيح. The device requires a Nano SIM card. Refer to the diagram below for correct insertion.
4. قم بتركيب الغطاء الخلفي والبطارية. Replace the battery and snap the back cover securely into place.

Note: DO NOT remove the LTE SIM card when the MiFi is powered on as this may damage the card and the MiFi.

2.3. Turning on the MiFi

Press the power button and hold for a while until the screen is lit, and Wi-Fi is on.

2.4. Setting Up a Wi-Fi Connection

To connect your devices to the MiFi's Wi-Fi network:

1. قم بتشغيل MiFi.
2. Connect your device (e.g., computer, smartphone) to the MiFi. You can do this via Wi-Fi or, if supported by your device and the MiFi model, via a wired USB connection for network sharing.
3. Ensure the LTE MiFi's Wi-Fi function is on.
4. ابحث على جهازك عن شبكات Wi-Fi المتوفرة.
5. Select the wireless network connection with the LTE MiFi's SSID (Network Name) and click "Connect". The SSID and network key (password) are typically printed on a label inside the MiFi's battery compartment or on the device itself.
6. Enter the correct network key (password) if prompted.

2.5. Logging into the Device Management Webموقع

The device management website allows you to configure advanced settings for your MiFi.

1. Make sure your end-user device is connected to the MiFi's Wi-Fi network.
2. افتح web المتصفح على جهازك المتصل.
3. يدخل http://192.168.0.1 or http://192.168.1.1 (refer to the device label for the exact address) in the address bar and press Enter.
4. Enter the username and password, and click "login". The default username and password are مسؤل.

2.6. Network Mode Selection

You can manually select the network channel to get better signal and network performance.

3. التشغيل

3.1. Basic Info on Screen Display

The MiFi's LCD screen provides essential information at a glance:

1. طاقة البطارية
2. قوة إشارة Wi-Fi
3. Number of Users Connected
4. Network Type (e.g., 4G LTE)
5. Signal Strength of Cellular Network
6. الاحصائيات المرورية
7. اسم مزود خدمة الشبكة

3.2. USB Network Sharing

The Type-C port on the MiFi is not only for charging but also supports network sharing. Connect the MiFi to a computer via a USB-C cable to share its internet connection.

3.3. وظيفة الرسائل القصيرة

Users can read, write, send, and receive messages on the router's service website. This allows you to manage SMS communications related to your SIM card directly through the MiFi's interface.

3.4. Creating a Safe Wi-Fi in Public

The router launches Wi-Fi via the network of the SIM card and supports various SIM cards from different communication operators, making it suitable for creating a secure personal hotspot in various public settings.

4. الصيانة

4.1. Charging your MiFi

There are two methods to charge your MiFi:

1. Charging by power adapter: Use a compatible power adapter (5V, 1000mA). Note that the power adapter is a selective accessory and may not be included.
2. Charging by connecting to a computer or laptop: Use the provided USB-C cable to connect the MiFi to a computer or laptop.

Note: If the MiFi hasn't been used for a long time, please charge the battery before using.

4.2. USB Storage

Connect the MiFi to a computer via a data cable. Once the computer reads an inserted T-Flash card (if present) in the MiFi, it will function as USB storage, allowing you to access fileعلى البطاقة.

4.3. استعادة إعدادات المصنع

If you are uncertain about your Wi-Fi settings or wish to revert to default configurations, you can restore factory settings:

• Via Device Management Webموقع: سجّل الدخول إلى إدارة الجهاز Website and navigate to the appropriate section to restore factory default settings.
• عبر زر إعادة الضبط: Press and hold the "Reset" button for 5 seconds. The MiFi will reactivate and restore to factory settings.

Note: Restoring factory settings will delete all user-defined Wi-Fi settings and restore Admin settings and Wi-Fi settings to their factory defaults.

5. استكشاف الأخطاء وإصلاحها

If you encounter issues with your MiFi, consider the following:

1. Consult the FAQ: View the FAQ available on the device management website by clicking the help icon in the top right corner.
2. الجهاز لا يستجيب: If the MiFi is not responsive, reboot it by pressing the 'Reset' button for about 5 seconds.
3. استعادة إعدادات المصنع: As described in section 4.3, restoring factory settings can resolve many configuration-related issues.

المشاكل الشائعة والحلول:

• "NO SIM" displayed: Ensure your Nano SIM card is correctly inserted. If your SIM card has a PIN code/lock, you must disable it using a mobile phone or by contacting your carrier before inserting it into the router. Otherwise, the router cannot work with the SIM card successfully.



• No Internet Connection after SIM insertion: Check the APN settings in the device management website. You may need to manually enter the APN profile provided by your SIM card carrier. Restart the router after making changes.
• السرعات البطيئة: Ensure you are within optimal coverage range. Try manually selecting a different network channel via the device management webموقع.

6. المواصفات

المواصفات العامة:

المواصفات الخاصة بالطراز:

Frequency Bands (Reference):

الأبعاد المادية:

7. الضمان والدعم

This product comes with a 12-month warranty. For any issues or support, please contact Benton Official Store customer service.

For additional guides and documents, you may refer to the official PDF user manual: View دليل المستخدم (PDF)

8 نصائح المستخدم

• توافق بطاقة SIM: This router does not support special SIM cards like eSIM, IOT SIM, or Roaming SIMs. Ensure you use a standard Nano SIM card from a local communication operator in the region where you intend to use the device.
• رمز PIN: Always disable any PIN code/lock on your SIM card using a mobile phone or by contacting your communication operator BEFORE inserting it into the MiFi router.
• توقعات السرعة: Be aware that advertised speeds (e.g., 150Mbps) are theoretical transmission rates. Actual network speeds may vary based on network conditions, signal strength, and carrier services. Do not expect the same performance as a high-end mobile phone.
• التجوال: The device does not support roaming. If you are in a different country, you will need to use a SIM card from a local operator in that country.

9. معلومات السلامة

• تنبيه البطارية: Risk of explosion if the battery is replaced with an incorrect or unapproved type. Used batteries must be disposed of according to the manufacturer's instructions.
• واجهة USB: يجب توصيل منتج MiFi فقط باستخدام واجهة USB من الإصدار USB2.0.
• موضع المحول: The adapter shall be installed near the equipment and shall be easily accessible. The plug is considered a disconnect device of the adapter.
• درجة حرارة التشغيل: The maximum operating temperature of the MiFi is 35°C.
• مواصفات التردد اللاسلكي: The device complies with RF specifications when used at 20cm away from the body.
• امتثال: يتوافق هذا الجهاز مع المتطلبات الأساسية والأحكام الأخرى ذات الصلة من التوجيه 1999/5 / EC.

10. فيديو المنتج

شاهد هذا الفيديو للحصول على لمحة سريعةview and demonstration of the Benton Portable 4G Router.