Aideepen USB Data Cable Detection Board User Manual

1. المقدمة

The Aideepen USB Data Cable Detection Board is a reliable and intuitive tool designed for testing the connection status and functionality of various USB cables. It helps users quickly identify issues such as short circuits or open connections within a cable by providing visual feedback through LED indicators for each pin. This manual provides detailed instructions for setting up, operating, and maintaining your USB Cable Tester.

2. معلومات السلامة

• Do not connect the device to a power source exceeding DC 12V.
• Ensure correct polarity when connecting an external power supply (Vin). The board includes directional connection protection for Vin.
• تجنب تعريض الجهاز للرطوبة أو درجات الحرارة القصوى.
• لا تحاول تفكيك الجهاز أو تعديله، لأن ذلك قد يبطل الضمان ويسبب تلفاً.
• This device is for testing cable continuity and functionality, not for measuring current carrying capacity.

3. محتويات العبوة

يرجى التحقق من الحزمة للعناصر التالية:

• 1 x USB Data Cable Test Board
• Optional: Protective Case (if purchased with case)

4. انتهى المنتجview

The USB Data Cable Detection Board features multiple USB port types and 24 LED indicators to provide comprehensive cable testing. It supports various USB standards and can be powered by a CR2032 coin cell or an external DC power supply.

4.1 مكونات رئيسية

• مفتاح التشغيل: يقوم بتشغيل/إيقاف تشغيل الجهاز.
• Power1 - CR2032: Slot for CR2032 coin cell battery.
• Power2 - Vin: Input for external DC 3-12V power supply.
• USB Port A: Includes Type-A 3.0, Type-A 2.0, and Type-C 3.0 connectors.
• USB Port B: Includes Type-B 3.0, Type-C 3.0, Micro-B 3.0, Mini-B 2.0, Lightning, and Micro-B 2.0 connectors.
• Electrical Test Point: For advanced testing.
• 24x LED Indicator: Displays the status of each pin connection.
• GND of external output: Ground pin for external connections.

4.2 أنواع الكابلات المدعومة

The tester supports a wide range of USB cable types, including:

• TypeB 3.0
• TypeB 2.0
• TypeC 3.0/3.1/3.2
• MicroB 3.0
• MicroB 2.0
• MiniB 2.0
• البرق السلكي

5. الإعداد

5.1 تشغيل الجهاز

The USB Data Cable Detection Board can be powered using one of two methods:

1. CR2032 Coin Cell Battery:
   • Locate the CR2032 battery slot on the board.
   • Tilt the battery end into the positive terminal of the battery holder and press down on the battery until it clicks into place.

   

2. External Power Supply (Vin):
   • Connect a DC power supply (3-12V) to the 'Vin' input port.
   • The Vin input provides directional connection protection.

   

5.2 التشغيل المبدئي

Once the power source is connected, slide the Power Switch to the 'ON' position. The LEDs should briefly illuminate as the device powers on.

6. تعليمات التشغيل

The USB Cable Tester is designed for straightforward operation. Follow these steps to test your USB cables:

1. تحضير الكابل: Ensure the USB cable you wish to test is clean and free from visible damage.
2. قم بتوصيل الكابل: Insert both ends of the USB cable into the corresponding connectors on the test board. For example, if testing a USB-A to USB-C cable, connect the USB-A end to a USB-A port on Pinrow A and the USB-C end to a USB-C port on Pinrow B.
3. راقب مؤشرات LED: The 24 LED indicators will light up to show the connection status of each pin. A lit LED indicates a successful connection for that specific pin.
4. تفسير النتائج:
   • All relevant LEDs lit: The cable is functioning correctly for all connected pins.
   • Some LEDs unlit: Indicates an open circuit or broken wire for the corresponding pin.
   • Unexpected LEDs lit or flickering: May indicate a short circuit or intermittent connection.

   

5. قطع الاتصال: Once testing is complete, carefully remove the cable from the test board.

6.1 Pinout Reference

Refer to the following table for the pinout descriptions of Pinrow A and Pinrow B, which correspond to the LED indicators:

6.2 فيديو توضيحي للمنتج

7. الصيانة

• حافظ على نظافة جهازك وخلوه من الغبار والأوساخ. استخدم قطعة قماش ناعمة وجافة للتنظيف.
• قم بتخزين الجهاز في مكان بارد وجاف عندما لا يكون قيد الاستخدام.
• If using a CR2032 battery, remove it if the device will not be used for an extended period to prevent leakage.
• تجنب إسقاط الجهاز أو تعريضه لصدمات قوية.

8. استكشاف الأخطاء وإصلاحها

8.1 الجهاز لا يعمل

• التحقق من مفتاح الطاقة: تأكد من أن مفتاح الطاقة في وضع التشغيل.
• بطارية CR2032: Verify the CR2032 battery is correctly installed and has sufficient charge. Replace if necessary.
• مصدر الطاقة الخارجي: If using external power, ensure the DC adapter is providing 3-12V and is properly connected.

8.2 LEDs Do Not Light Up for a Known Good Cable

• اتصال سلكي: Ensure both ends of the cable are fully and correctly inserted into the appropriate ports on the test board.
• مصدر الطاقة: Double-check the power source as described above.
• عطل في الجهاز: If all other checks fail, the device may be faulty. Contact support.

8.3 Inconsistent LED Readings

• سلامة الكابل: The cable itself might have an intermittent fault. Try wiggling the cable gently while connected to see if LEDs flicker.
• نظافة الموصل: Ensure the cable connectors and the board's ports are clean and free of debris.

9. المواصفات

10 نصائح المستخدم

• For prolonged testing sessions, consider using an external DC 3-12V power supply via the 'Vin' port to conserve CR2032 battery life.
• Always ensure the cable is fully inserted into the correct ports for accurate readings. A loose connection can lead to false negatives.
• When testing a new cable, observe if all expected pins light up. This is a quick way to verify a cable's basic integrity before use.

11. الضمان والدعم

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the product packaging or contact your retailer. For technical support or inquiries, please reach out to the seller or manufacturer directly.