TrustFire L2S-SE Tactical LED Flashlight User Manual

1. المقدمة

The TrustFire L2S-SE is a powerful and reliable tactical LED flashlight designed for various outdoor activities and daily use. It features a maximum brightness of 1050 lumens and a beam range of up to 175 meters. This manual provides detailed instructions for the safe and effective use, setup, and maintenance of your L2S-SE flashlight.

Figure 1: TrustFire L2S-SE Tactical LED Flashlight

L2S-SE Tactical Flashlight with 1050 Lumens and 175 Meters beam range — Figure 2: L2S-SE Tactical Flashlight highlighting 1050 Lumens and 175 Meters beam range

2. محتويات العبوة

يرجى تحديد المربع للعناصر التالية:

TrustFire L2S-SE Tactical Flashlight
دليل المستخدم (هذا المستند)
14500 Rechargeable Lithium-ion Battery (if included with purchase)
مشبك الجيب
حبل العنق
حلقات O احتياطية
كابل شحن USB من النوع C

Contents of the TrustFire L2S-SE package — Figure 3: Included items in the L2S-SE package

3. المواصفات

ميزة	التفاصيل
رقم الموديل	L2S-SE
العلامة التجارية	ترست فاير
مصدر الضوء	مصابيح LED (خرزات LED Q4)
الحد الأقصى للسطوع	1050 لومن (مع بطارية 14500)
أقصى مدى للشعاع	175 Meters (with 14500 battery)
واتtage	15 واط
وضع التبديل	High/Middle/Low (2-4 Files Support Dimmer)
البعد البؤري	غير قابل للتعديل
تكبير	لا
تصنيف مقاومة الماء	IPX6
مادة الجسم	Aviation aluminum AL6061-T6 (military grade hard anodizing)
أبعاد	98 ملم (الطول) × 20.5 ملم (قطر الرأس) × 21.5 ملم (قطر الأنبوب)
الوزن الصافي	43.2 غرام (بدون بطارية) / 65.1 غرام (مع البطارية)
ارتفاع السقوط	1 متر
شهادة	CE
مميزات اضافية	حجم منخفضtage warning, intelligent temperature control, Type-C charging

3.1 Performance Table (Approximate Values)

Note: The following parameters are approximate values only, measured in a laboratory environment for 14500 750mAh rechargeable lithium-ion batteries, and may vary with changes in the use environment and battery.

Product Parameters table showing brightness, run time, range, and light intensity for 14500 and Alkaline/NiMH batteries across different modes. — Figure 4: Detailed performance specifications for L2S-SE

وضع	Brightness (14500 / Alkaline/NiMH)	Run Time (14500 / Alkaline/NiMH)	Range (14500 / Alkaline/NiMH)	Light Intensity (14500 / Alkaline/NiMH)
ضوء القمر	3LM / 3 لومن	35 ساعات / 55 ساعة	7م / 7م	72 CD / 12 CD
وسط	150LM / 50 لومن	3 ساعات / 5 ساعة	66م / 38م	1089 CD / 361 CD
عالي	1050LM / 175 لومن	65 دقائق / 131 دقائق	176م / 75م	7744 CD / 1406 CD

4. الإعداد

4.1 Battery Selection and Installation

The L2S-SE flashlight is compatible with both 14500 rechargeable lithium-ion batteries and standard Alkaline/NiMH AA batteries. For optimal performance and features like in-flashlight charging, a 14500 lithium-ion battery with a protective plate (e.g., TrustFire-14500 X series) is recommended.

Battery selection guide for TrustFire L2S-SE flashlight — Figure 5: Recommended and available battery types

قم بفك غطاء الذيل للمصباح اليدوي.
Insert the battery with the positive (+) end facing towards the head of the flashlight. The L2S-SE features an anti-reverse connection design to prevent damage from incorrect battery insertion.
قم بربط غطاء الذيل مرة أخرى بشكل آمن.

Important Battery Warnings:

Do not use batteries not provided by our store to avoid damaging the battery or flashlight.
14500 batteries are industrial batteries, not safe civilian batteries. Improper use (short circuit, high temperature, etc.) may cause burning or explosion, endangering personal and property safety.
Using high-quality lithium-ion batteries with protection plates can reduce risks. TrustFire series batteries are recommended.
Alkaline/NiMH batteries can be used, but they CANNOT be charged inside the flashlight via the Type-C port. Attempting to do so may cause damage or present a safety hazard.

4.2 Charging (for 14500 Li-ion batteries only)

If using a 14500 rechargeable lithium-ion battery, you can charge it directly within the flashlight using the provided USB Type-C cable.

حدد موقع منفذ الشحن من النوع C على جسم المصباح اليدوي.
Connect the USB Type-C cable to the flashlight and a suitable USB power source (e.g., computer, wall adapter).
The flashlight will indicate charging status (e.g., red for charging, green for fully charged).
بمجرد شحنه بالكامل، افصل الكابل.

Note: Alkaline/NiMH batteries cannot be charged in the flashlight. Attempting to do so may cause damage or present a safety hazard.

5. التشغيل

The L2S-SE features a convenient one-button operation located at the tail of the flashlight.

One-button operation instructions for TrustFire L2S-SE flashlight — الشكل 6: دليل التشغيل بزر واحد

تشغيل/إيقاف الطاقة: Press the tail button completely until it clicks to turn the flashlight on or off.
Shift Gear (Brightness Modes): With the flashlight on, click the tail button repeatedly within 0.5 seconds to cycle through the brightness modes: Low → Middle → High.
Memory Gear: If the flashlight is left on a specific brightness mode for more than 0.5 seconds before being turned off, it will remember that mode and turn on in the same mode next time.
وضع ستروب: In the power-off state, quickly press the tail button halfway twice (without fully clicking) to enter strobe mode.

Illustration of the gear memory function of the flashlight — Figure 7: Gear Memory Function

5.1 حجم منخفضtagهـ تحذير

When the battery power is low, the flashlight will flash three times every 5 minutes to remind the user to replace or recharge the battery.

6. الصيانة

تنظيف: نظف جسم المصباح اليدوي بانتظام بقطعة قماش ناعمة و...amp قماش. تجنب استخدام الكيماويات القاسية أو المواد الكاشطة.
الخيوط والحلقات الدائرية: Periodically lubricate the screw threads and O-rings with silicone grease to maintain waterproofing and smooth operation. Replace worn O-rings with the provided spares.
العناية بالبطارية: If the flashlight will not be used for an extended period, remove the battery to prevent leakage and damage.
ضد للماء: The L2S-SE is IPX6 waterproof, meaning it is protected against powerful water jets. While it can withstand heavy rain, it is not designed for submersion. Ensure all parts are tightly sealed before exposure to water.

IPX6 Waterproof rating illustration for the flashlight — الشكل 8: ميزة مقاومة الماء بمعيار IPX6

7. استكشاف الأخطاء وإصلاحها

مشكلة	السبب المحتمل	حل
المصباح لا يعمل.	تم تركيب البطارية بشكل غير صحيح أو استنفدت.	Check battery polarity (+ end towards head). Replace or recharge battery.
Brightness modes do not change.	Button not clicked quickly enough or faulty.	Ensure quick, repeated clicks within 0.5 seconds. If issue persists, contact support.
Flashlight flashes three times every 5 minutes.	حجم منخفضtagتحذير.	Replace or recharge the battery immediately.
دخول الماء.	Loose tail cap or worn O-rings.	Ensure tail cap is tightened. Inspect and lubricate/replace O-rings. Avoid submersion.

8 نصائح المستخدم

Versatile Carrying: Utilize the two-way bag clip for easy attachment to pockets, belts, or bags, making it convenient for everyday carry (EDC).
التحكم في درجة الحرارة: The built-in intelligent temperature control system helps prevent overheating during prolonged use, ensuring comfort and extending the flashlight's lifespan.
طلب: The L2S-SE is suitable for various scenarios including outdoor sports, circuit maintenance, finding items in dark spaces, and daily dog walking.

Two-way bag clip feature for easy carrying — Figure 9: Two-Way Bag Clip for Easy Carry

Various application scenarios for the L2S-SE flashlight — Figure 10: Versatile Application Scenarios

9. الضمان والدعم

للحصول على معلومات الضمان أو الدعم الفني أو الاستفسارات المتعلقة بالخدمة، يرجى الرجوع إلى موقع TrustFire الرسمي webالموقع أو تواصل مع بائع التجزئة. احتفظ بإيصال الشراء كإثبات للشراء.

For the full user manual in PDF format, you can refer to the official document: TrustFire L2S-SE User Manual (PDF)