دليل مستخدم وحدة التحكم في شحن الطاقة الشمسية ANERN AN-MSC-60A MPPT

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your ANERN AN-MSC-60A MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from solar panels to various battery types in 12V or 24V systems, ensuring optimal charging and battery longevity.

Figure 1: ANERN MPPT Solar Charge Controller AN-MSC-60A front view, highlighting Max Charging Current, Max PV Input, and Battery Voltage.

2. الميزات الرئيسية

• تقنية MPPT المتقدمة (تتبع نقطة الطاقة القصوى) بكفاءة تتبع لا تقل عن 99.5٪.
• High conversion efficiency, reaching up to 97%.
• Super-fast maximum power tracking speed.
• تحديد وتتبع دقيقين لنقاط ذروة الطاقة القصوى متعددة الموجات.
• Reliable maximum input power for PV arrays, ensuring equipment safety.
• مجموعة واسعة من الطاقة الكهروضوئية، أقصى حجم تشغيل لنقطة الطاقةtagالنطاق ه.
• نظام تلقائي 12 فولت/24 فولتtagتحديد ه.
• شاشة LCD لعرض بيانات التشغيل الديناميكية وحالة العمل.
• Multiple load control modes: Regular, Light Control, Light & Time, and Reverse Light Control.
• Supports various battery types: Sealed, GEL, Flooded, LiFePO4, and Li(NiCoMn)O2.
• وظيفة تعويض درجة حرارة البطارية.
• وظيفة تسجيل إحصاءات الطاقة.
• External display unit and peripheral support for real-time data view and parameter setting.
• PWM function at High Voltage Disconnection (HVD) point to protect the battery.

Figure 2: High Efficiency MPPT Tracking

3. الإعداد والتثبيت

Follow these steps carefully to connect and install your solar charge controller. Ensure all connections are secure before powering on the system.

1. Open the cover by gently pulling both hands down to reveal the screw terminals.
2. Connect the battery cables first. Ensure correct polarity (positive to positive, negative to negative).
3. Connect the photovoltaic (solar panel) cables. Ensure correct polarity.
4. Connect the load cables. Ensure correct polarity.

Figure 3: Installation Steps and Terminal Access

3.1 مخطط الأسلاك

The following diagram illustrates the typical wiring configuration for the MPPT solar charge controller in a solar power system. Always ensure proper fusing and breaking mechanisms are in place for safety.

الشكل 4: مخطط توصيل النظام

3.2 تبديد الحرارة

The controller features a die-cast aluminum structure designed for efficient heat dissipation, ensuring continuous and stable charging performance.

Figure 5: Heat Dissipation Mechanism

4. تعليمات التشغيل

4.1 Load Operating Modes

The controller offers four distinct load operating modes. The default setting is 24-hour operation. You can select the desired mode based on your application needs.

Figure 6: Load Operating Modes

• LD1 (Regular Mode): The load operates normally and can be turned on or off manually.
• LD2 (Light Control Mode): The load automatically turns on at dusk and off at dawn.
• LD3 (Light & Time Control Mode): The load operates for a set number of hours after dark and before dawn. The controller automatically identifies dark and light conditions based on the local environment.
• LD4 (Reverse Light Control Mode): The load automatically turns on at dawn and off at dark.

4.2 Interface Description (LCD and Buttons)

The LCD provides real-time status and data. The buttons allow for navigation and parameter adjustments.

Figure 7: LCD Interface and Button Functions

5. الصيانة

To ensure optimal performance and longevity of your MPPT Solar Charge Controller, regular maintenance is recommended:

• احرص على إبقاء وحدة التحكم نظيفة وخالية من الغبار والحطام.
• Ensure proper ventilation around the unit to facilitate heat dissipation.
• قم بإجراء فحص دوري لجميع توصيلات الأسلاك للتأكد من إحكامها والتآكل.
• Inspect the solar panels and battery terminals for any signs of damage or wear.
• قم بمراقبة شاشة LCD بحثًا عن أي رموز خطأ أو قراءات غير عادية.

6. Troubleshooting and Protection Functions

The controller is equipped with several protection functions to safeguard your system. Understanding these can help in basic troubleshooting.

Figure 8: Controller Protection Functions

• Solar Panel Reversed: The controller is protected if the solar panel polarity is reversed, especially if the battery is not connected.
• Battery Reversed: The controller is protected if the battery polarity is reversed, particularly if the PV array is unconnected.
• زيادة حجم البطاريةtage: Protection activates if the battery voltage يصل إلى المجلد الزائدtage point, preventing damage from overcharging.
• تفريغ البطارية الزائد: Protection activates if the battery voltagه يسقط تحت المجلدtage point, preventing deep discharge.
• Over-Load: Protection engages if the load current exceeds the rated current, preventing damage to the controller and connected devices.

If you encounter issues not covered here, please consult the full product documentation or contact customer support.

7. المواصفات

Below are the detailed technical specifications for the ANERN AN-MSC-60A MPPT Solar Charge Controller.

الجدول 1: المواصفات الفنية

8 نصائح المستخدم

لم تتوفر أي نصائح محددة للمستخدم من إعادةviews or Q&A for this product at this time. Always refer to the detailed instructions for optimal performance.

9. الضمان والدعم

For warranty information, technical support, or service inquiries, please contact the seller or refer to the official product webموقع. احتفظ بإيصال الشراء الخاص بك لمطالبات الضمان.