1. المقدمة
This manual provides essential information for the safe and effective use of your RadioMaster 6200mAh 2S LiPo Transmitter Battery. This high-capacity LiPo battery is designed to provide extended operation for compatible RadioMaster transmitters, including the TX16S, TX16S MKII, and Boxer models, offering up to 20 hours of duration.
2. تحذيرات هامة تتعلق بالسلامة
Lithium Polymer (LiPo) batteries require careful handling. Failure to follow these safety instructions can result in fire, personal injury, and property damage.
- Do not charge battery unattended: Always monitor the battery during charging.
- Always charge battery away from flammable objects: Ensure a safe charging environment.
- Do not disassemble or modify this battery: Tampering with the battery can be dangerous.
- Only use correct charging devices: Use a LiPo-compatible charger with appropriate settings.
- Max Charging Current 2.0A: Do not exceed this charging current.
- Do not puncture, drop, short-circuit, or expose the battery to extreme temperatures.
- If the battery swells, leaks, or shows any signs of damage, discontinue use immediately and dispose of it safely.
3. المواصفات
| ميزة | التفاصيل |
|---|---|
| غرض | 2S 7.4V 6200mAh LiPo Battery |
| المجلد الاسميtage | 7.4 فولت |
| سعة | 6200 مللي أمبير |
| واط ساعة | 45.88 واط/ساعة |
| الموصلات | JST-XH and XT30 |
| الحد الأقصى لتيار الشحن | 2A |
| الأبعاد (الطول × العرض × الارتفاع) | 85 مم × 50 مم × 21 مم |
| وزن | 203 جرام |
| التوافق | RadioMaster Boxer, TX16S, TX16S MKII series transmitters |
4. الإعداد والتثبيت
This battery is designed for direct installation into compatible RadioMaster transmitters. Ensure your transmitter is powered off before proceeding.
- تحديد مكان حجرة البطارية: Refer to your transmitter's user manual to locate and open the battery compartment.
- توصيل البطارية: Carefully connect the XT30 main power connector from the battery to the corresponding port in your transmitter. The JST-XH balance lead is typically used for charging and balancing, and may also connect to an internal balance port if available in your transmitter.
- بطارية آمنة: Place the battery securely within the compartment, ensuring no wires are pinched.
- إغلاق المقصورة: أغلق غطاء حجرة البطارية.
5. التشغيل
Once installed, the battery powers your RadioMaster transmitter. Turn on your transmitter as per its specific instructions. The 6200mAh capacity provides extended usage times, up to 20 hours, depending on your transmitter model and usage patterns.
Monitor your transmitter's battery voltage display regularly to ensure the battery does not discharge below its safe operating voltage (typically 3.3V per cell for LiPo, or 6.6V for a 2S battery). Over-discharging can permanently damage the battery.
6. تعليمات الشحن
Always follow the safety warnings in Section 2 when charging your LiPo battery.
- Use a LiPo Charger: Connect the battery to a dedicated LiPo balance charger. Use both the XT30 main power connector and the JST-XH balance lead for safe and balanced charging.
- Set Charger Parameters: Configure your charger for a 2S (7.4V) LiPo battery. Set the charging current to a maximum of 2.0A. Charging at a lower current (e.g., 1A or 0.5A) is generally safer and can extend battery life.
- مراقبة الشحن: Never leave the battery unattended while charging. Place it on a non-flammable surface, away from combustible materials.
- افصل بعد الشحن: Once charging is complete, disconnect the battery from the charger. Do not leave it connected indefinitely.
7. الصيانة والتخزين
- حجم التخزينtage: For long-term storage, charge or discharge the battery to its storage voltage (typically 3.8V per cell, or 7.6V for a 2S battery). Most modern LiPo chargers have a 'Storage' mode.
- درجة حرارة: قم بتخزين البطارية في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- البحث الجسدي: Regularly inspect the battery for any signs of damage, swelling, or leaks. Discontinue use and dispose of damaged batteries safely.
- تصرف: Dispose of LiPo batteries responsibly according to local regulations. Never throw them in household waste.
8. استكشاف الأخطاء وإصلاحها
- البطارية لا تشحن: Ensure all connectors (XT30 and JST-XH) are securely plugged into the charger and battery. Verify charger settings are correct for a 2S LiPo battery. Check for any visible damage to the battery or cables.
- وقت تشغيل قصير: If the battery's run time is significantly shorter than expected, it may be due to aging, damage, or improper charging/storage. Ensure you are not over-discharging the battery during use.
- انتفاخ البطارية: If the battery appears swollen, immediately discontinue use and safely dispose of it. Swelling indicates internal damage and a potential fire hazard.
- جهاز الإرسال لا يعمل: Check that the battery is fully charged and correctly installed in the transmitter. Ensure the XT30 connector is firmly seated.
9 نصائح المستخدم
لا توجد نصائح محددة للمستخدم من إعادةviews or Q&A are available at this time. Always prioritize safety and follow the manufacturer's guidelines for your transmitter and battery.
10. الضمان والدعم
For warranty information and technical support, please refer to the official RadioMaster webالموقع أو تواصل مع الوكيل المعتمد. احتفظ بإيصال الشراء لأي مطالبات بالضمان.
