1. المقدمة
This manual provides detailed instructions for the installation, operation, and maintenance of your Haier YR-E17 Wired Controller for central air-conditioning systems. Please read this manual carefully before using the controller and keep it for future reference.
2. معلومات السلامة
- تأكد من إجراء جميع التوصيلات الكهربائية بواسطة متخصص مؤهل.
- Disconnect power to the air conditioning unit before installation or maintenance.
- لا تعرض جهاز التحكم للماء أو الرطوبة الزائدة.
- Do not attempt to open or repair the controller yourself. Refer to qualified service personnel.
3. انتهى المنتجview
The Haier YR-E17 is a wired controller designed for seamless integration with Haier central air-conditioning units. It provides intuitive control over various functions of your air conditioning system, including mode selection, temperature adjustment, and fan speed settings.
4. المواصفات
| ميزة | مواصفة |
|---|---|
| رقم الموديل | YR-E17 (0150401331AM) |
| يستخدم | مكيف الهواء |
| نوع الاتصال | التحكم في الأسلاك |
| قناة | 1 |
| دعم التطبيق | لا |
| أصل | الصين القارية |
| أبعاد العبوة (تقريبًا) | الطول: 28 سم العرض: 20 سم الارتفاع: 3 سم |
| الوزن الإجمالي (تقريبًا) | 0.8 كجم |
5. الإعداد
The Haier YR-E17 Wired Controller requires professional installation due to its wired connection to the central air-conditioning unit. The following steps outline a general installation process:
- التركيب: Choose a suitable indoor location for the controller, typically at eye level and away from direct sunlight or heat sources that could affect temperature readings. Secure the controller to the wall using appropriate screws.
- التوصيلات الكهربائية: Access the wiring terminal block on the rear of the controller (refer to the 'PRESS TO OPEN' label on the back). Connect the communication wires from your central air-conditioning unit to the corresponding terminals on the controller. Ensure correct polarity and secure connections. Refer to the specific wiring diagram provided with your air conditioning unit for precise connections.
- توصيل الطاقة: Once wiring is complete, restore power to the central air-conditioning unit. The controller should power on and display initial settings.
- الترتيب الأولي: Follow the on-screen prompts or refer to the air conditioning unit's manual for any initial configuration steps required for the controller to communicate with the system.
6. تعليمات التشغيل
The YR-E17 controller features an intuitive display and buttons for easy operation. Refer to the diagram below for button identification and basic functions:
الوظائف الرئيسية:
- تشغيل/إيقاف: اضغط لتشغيل أو إيقاف تشغيل وحدة تكييف الهواء.
- وضع: Press this key to cycle through available operating modes (e.g., Cooling, Heating, Fan, Auto, Dry). If using a Fresh Air unit, default 3 modes will circulate from cooling-heating-fan.
- مروحة: ضبط سرعة المروحة (على سبيل المثال، منخفضة، متوسطة، عالية، تلقائية).
- تعيين: Used to confirm selections or enter/exit settings menus.
- وقت: Used for setting timers or scheduling operations.
- ضبط درجة الحرارة: Use the up/down arrows (typically integrated with other buttons or as separate controls) to increase or decrease the desired temperature.
For detailed information on advanced settings and specific mode functionalities, please refer to the comprehensive manual that came with your air conditioning system.
7. الصيانة
To ensure optimal performance and longevity of your Haier YR-E17 Wired Controller, follow these simple maintenance guidelines:
- تنظيف: Gently wipe the surface of the controller with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the display or internal components.
- تقتيش: Periodically check the controller for any visible damage or loose connections. If any issues are observed, contact a qualified technician.
- تجنب العرقلة: Ensure that the controller's temperature sensor (if applicable, usually a small vent) is not obstructed by furniture, curtains, or other objects, as this can lead to inaccurate temperature readings.
8. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Haier YR-E17 Wired Controller, try the following basic troubleshooting steps:
- وحدة التحكم لا تستجيب: Check if the central air-conditioning unit has power. Ensure all wiring connections are secure. If the issue persists, power cycle the air conditioning unit (turn off at the breaker for a few minutes, then turn back on).
- قراءات درجة الحرارة غير الصحيحة: Ensure the controller is not exposed to direct sunlight, drafts, or heat sources. Verify that the sensor area is not obstructed.
- مشاكل العرض: If the display is blank or showing errors, try power cycling the air conditioning unit. If the problem continues, professional service may be required.
نصائح المستخدم:
- Ensure the controller is functioning correctly after installation by testing all modes and temperature adjustments.
9. الضمان والدعم
For warranty information and technical support, please refer to the documentation provided with your Haier central air-conditioning system or contact your authorized Haier service provider. Keep your purchase receipt as proof of purchase.
