Merax King Chenille Platform Bed (Model JY00531-6) Instruction Manual

1. معلومات هامة حول السلامة

يرجى قراءة جميع التعليمات وفهمها قبل تجميع هذا المنتج واستخدامه. احتفظ بهذا الدليل للرجوع إليه مستقبلاً.

• قدرة الوزن: This bed frame is designed to support a maximum weight of 800 رطل (including mattress and occupants). Do not exceed this limit.
• حَشد: Assemble the bed frame on a soft, clean surface to prevent damage. Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten fasteners.
• أطفال: Keep small parts away from children during assembly. This product is not intended for use by children without adult supervision.
• الموقع: ضع إطار السرير على سطح مستوٍ لضمان ثباته.

2. محتويات العبوة

تأكد من وجود جميع المكونات قبل البدء بالتجميع. في حال وجود أي أجزاء مفقودة أو تالفة، يرجى التواصل مع خدمة العملاء.

الشكل 2.1: مثالample of bed frame components. Actual components may vary slightly.

المكونات المتوقعة:

• لوح الرأس (1)
• لوح القدم (1)
• القضبان الجانبية (2)
• عارضة الدعم المركزية (1)
• Slats (Multiple pieces)
• Support Legs for Slats (Multiple pieces)
• Removable Headboard Pillows (2)
• Hardware Pack (Bolts, Washers, Allen Wrench, etc.)
• Installation Manual (This document)

الأدوات المطلوبة (غير متضمنة):

• Phillips Head Screwdriver (for some fasteners)
• مطرقة مطاطية (اختيارية، للطرق الخفيف)

3. تعليمات التجميع

Follow these steps carefully to assemble your Merax King Chenille Platform Bed. It is recommended to have two people for assembly.

1. فك الأجزاء وتحديدها: Lay out all components on a clean, soft surface. Compare them with the parts list to ensure everything is present.
2. قم بتثبيت القضبان الجانبية على لوح الرأس: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts and washers. Do not fully tighten yet.
3. قم بتثبيت القضبان الجانبية على لوح القدم: Connect the other end of the side rails to the footboard, aligning holes and securing with bolts and washers. Once all connections are made, fully tighten all bolts.

Figure 3.1: Assembled frame structure.
4. تركيب دعامة الدعم المركزية: Place the center support beam into the designated slots or brackets along the length of the bed frame. Secure it with the provided hardware.
5. Attach Slat Support Legs: If your slats require individual support legs, attach them now according to the instructions in your hardware pack.


Figure 3.2: Detail of a solid wood leg.

6. وضع الشرائح: Distribute the wooden slats evenly across the bed frame. Secure them to the side rails using the provided screws or fasteners. Ensure all slats are firmly in place to provide adequate mattress support.


Figure 3.3: Slats installed on the bed frame.

7. Attach Headboard Pillows: The two padded pillows are removable. Attach them to the headboard as desired for comfort and aesthetic.
8. التحقق النهائي: Confirm all connections are tight and the bed frame is stable before placing your mattress.

4. إرشادات الاستخدام

To ensure the longevity and proper function of your Merax King Chenille Platform Bed, observe the following guidelines:

• توافق المرتبة: This bed frame is designed for mattresses between 6 inches and 12 inches thick. A box spring is not required.
• توزيع الوزن: Distribute weight evenly across the bed surface. Avoid concentrating heavy loads in one small area.
• Headboard Pillows: The removable headboard pillows provide additional comfort for sitting up. Adjust them as needed for your preference.
• حركة: When moving the bed, lift it rather than dragging it to prevent damage to the legs and frame structure.

Figure 4.1: Merax King Chenille Platform Bed in use.

5. الرعاية والصيانة

Proper care will help maintain the appearance and structural integrity of your bed frame.

• تنظيف الأقمشة: The chenille fabric can be spot cleaned with a mild detergent and a damp cloth. Test on an inconspicuous area first. Avoid harsh chemicals or abrasive cleaners.


Figure 5.1: Detail of the chenille fabric.

• تنظيف الإطار: Wipe the wooden legs and exposed frame parts with a soft, dry cloth.
• فحص المثبتات: Periodically (every 3-6 months) check all bolts and screws and re-tighten them as necessary to ensure stability.
• تجنب أشعة الشمس المباشرة: Prolonged exposure to direct sunlight may cause fabric fading.

6. استكشاف الأخطاء وإصلاحها

إذا واجهت أي مشاكل مع إطار سريرك، راجع الحلول الشائعة التالية:

• صرير السرير:
  • تأكد من أن جميع البراغي والمسامير مشدودة بشكل كامل.
  • Check that slats are evenly spaced and securely fastened.
  • Verify the center support beam is properly installed and its legs are firm on the floor.
• السرير غير مستقر:
  • Confirm the bed is on a level surface.
  • قم بإعادة ربط كافة أدوات التجميع.
  • تأكد من أن جميع أرجل الدعم متصلة بشكل ثابت بالأرضية.
• الأجزاء المفقودة أو التالفة:
  • Do not attempt to assemble with missing or damaged parts. Contact Merax customer support immediately for replacements.

7. مواصفات المنتج

الشكل 7.1: الأبعادview of the King size bed frame.

8. الضمان والدعم

Merax is committed to providing quality products. For any questions, concerns, or warranty claims regarding your Merax King Chenille Platform Bed, please contact our customer support team.

• دعم البريد الإلكتروني: csr@merax.com
• دعم الهاتف: 626-912-8886

Please have your model number (JY00531-6) and purchase information ready when contacting support to expedite assistance.