Diyife IPX5 Weatherproof Outdoor Keyless Entry Padlock Instruction Manual

1. المقدمة

Thank you for choosing the Diyife IPX5 Weatherproof Outdoor Keyless Entry Padlock. This manual provides essential information for the proper setup, operation, and maintenance of your new padlock. Please read these instructions carefully before use to ensure optimal performance and security.

Image 1.1: Diyife IPX5 Weatherproof Outdoor Keyless Entry Padlock. This image shows the front view of the black padlock with its numeric keypad and shackle.

2. مواصفات المنتج

• IPX5 Weatherproof Rating: Constructed from premium zinc alloy and stainless steel, designed to withstand rain and low-pressure water spray. Not submersible.
• Dual Protection Mode: Offers both a 6-digit numeric code entry and a mechanical key for unlocking.
• Ultra-Long Standby Battery Life: Powered by two CR2032 lithium metal button batteries, providing up to 12 months of standby time or over 3000 unlocks.
• High Security Anti-Theft Design: Features an 8mm-thick cut-resistant hardened steel shackle and a solid zinc alloy lock body with a dual locking mechanism to resist cutting, prying, and impact.
• تطبيق متعدد الاستخدامات: Suitable for front doors, garden fences, storage sheds, gym lockers, toolboxes, cabinets, and more.

Image 2.1: The padlock shown in a rainy environment, demonstrating its IPX5 weatherproof capability. Water splashes around the lock on a dark, rocky surface.

الصورة 2.2: لقطة مقربة view highlighting the padlock's construction, including its solid zinc alloy body, hardened steel shackle, and 8mm locking beam measurement.

3. محتويات العبوة

يرجى التأكد من وجود جميع العناصر في الحزمة الخاصة بك:

• 1 x Diyife Combination Padlock
• شنومكس x مفاتيح ميكانيكية
• 1 x Small Phillips Screwdriver (for battery replacement)
• 1 × دليل التعليمات (هذه الوثيقة)
• 2 x CR2032 Lithium Metal Button Batteries (pre-installed)
• 2 x Spare CR2032 Lithium Metal Button Batteries

4. الإعداد

4.1 تركيب البطارية / استبدالها

Your padlock comes with two CR2032 batteries pre-installed. A spare set is also included. If the low battery indicator (LEDs) illuminates, or if the lock does not respond, replace the batteries as follows:

1. Use the provided Phillips screwdriver to remove the screw securing the battery compartment cover on the underside of the padlock.
2. قم بإزالة غطاء حجرة البطارية بعناية.
3. Take out the old CR2032 batteries.
4. Insert two new CR2032 batteries, ensuring the positive terminal (+) faces up and the negative terminal (-) faces down.
5. استبدل غطاء حجرة البطارية وثبته بالمسمار.

Image 4.1: A diagram illustrating the battery replacement process. It shows the location of the battery compartment screw and how to insert the CR2032 batteries with correct polarity.

4.2 Initial Code Setting / Changing the Numeric Code

The padlock does not have a default factory code. You must set your personal 6-digit code before first use. The lock supports up to 10 unique passcodes. Follow these steps to set or change your numeric code:

1. Ensure the padlock is unlocked. If it is locked, unlock it using the mechanical key (refer to Section 5.2).
2. Locate the small reset button or lever, typically found inside the shackle opening or within the battery compartment. (Note: Specific location may vary slightly. Refer to the physical lock for exact placement.)
3. Press and hold the reset button/lever. The LEDs on the keypad may illuminate or flash, indicating it is in programming mode.
4. While holding the reset button/lever, enter your desired 6-digit code on the keypad.
5. Release the reset button/lever. The LEDs should provide feedback (e.g., a green light or a specific flash pattern) to confirm the new code has been successfully set.
6. Test your new code immediately while the shackle is still open. Enter the 6-digit code and press the unlock button (if present, or the last digit of the code might act as unlock). The shackle should remain open or click, confirming the code works.
7. If the code does not work, repeat the steps from 1 to 6.

Important: Remember your code. There is no master code to retrieve a forgotten numeric code. The mechanical key is your only backup.

5. تعليمات التشغيل

5.1 فتح القفل باستخدام الرمز الرقمي

1. Ensure the padlock is in an upright position.
2. Enter your 6-digit numeric code on the keypad. The LEDs will provide feedback for each digit entered.
3. After entering the correct code, the shackle will automatically spring open.
4. To re-lock, simply push the shackle back into the lock body until it clicks securely.

Image 5.1: A hand entering a 6-digit code on the padlock's keypad, demonstrating the numeric code unlock method.

5.2 فتح القفل باستخدام المفتاح الميكانيكي

The mechanical key serves as an emergency backup, especially if the batteries are depleted or if you forget your code.

1. Insert one of the provided mechanical keys into the keyhole located on the side of the padlock. The key is double-sided and can be inserted in either orientation.
2. Turn the key to unlock the shackle.
3. Remove the key and push the shackle back into the lock body to re-lock.

Image 5.2: A split image showing both the numeric code unlock method (left) and the mechanical key unlock method (right) for the padlock.

6. الصيانة

• استبدال البطارية: Replace batteries promptly when the low battery indicator appears (refer to Section 4.1).
• تنظيف: Wipe the padlock with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
• الظروف البيئية: While IPX5 rated, avoid prolonged submersion in water. Operating temperature range is -15°C to 55°C.
• تخزين المفاتيح: Store backup mechanical keys in a safe, accessible location separate from the padlock.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

Image 8.1: The padlock with its dimensions (3.5 inches height, 2.2 inches width, 1.1 inches depth) and weight (8.9 ounces / 253g) clearly indicated.

• ماركة: ديييف
• رقم الموديل: UKTAL136
• نوع القفل: Combination Lock (6-digit) with Key Backup
• مادة: Zinc Alloy (body), Hardened Steel (shackle)
• Shackle Thickness: 8 ملم (5/16 بوصة)
• الأبعاد (الطول × العرض × الارتفاع): 8.9 x 2.8 x 5.6 cm (3.5 x 1.1 x 2.2 inches)
• وزن السلعة: 253 جرام (8.9 أونصة)
• مقاومة الماء: IPX5 (splash-proof, not submersible)
• طريقة التحكم: لوحة مفاتيح الضغط على الزر
• مصدر الطاقة: 2 x CR2032 Lithium Metal Button Batteries
• وقت الاستعداد: حتى 12 أشهر
• درجة حرارة التشغيل: -15 درجة مئوية إلى 55 درجة مئوية

9. الضمان والدعم

Diyife products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Diyife webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.

Image 9.1: A collage showing the padlock in various application scenarios: securing gates, fences, storage cabinets, and toolboxes.