LiebeWH HW-QB6 5-in-1 Wall Scanner Detector

1. المقدمة

The LiebeWH HW-QB6 is a versatile 5-in-1 wall scanner detector designed to accurately locate wood studs, metal objects (rebar, pipes, conduit), and live AC wires behind walls, floors, and ceilings. This device is an essential tool for home renovation projects, installation tasks, and general DIY work, providing critical information to prevent damage and ensure safety.

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your LiebeWH HW-QB6 wall scanner.

الشكل 1: الجبهة view of the LiebeWH HW-QB6 Wall Scanner Detector, showing the LCD display and control buttons.

2. معلومات السلامة

WARNING: Read all safety warnings and instructions before using this device. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always assume live electrical wires are present behind walls. Exercise extreme caution when drilling or cutting.
• Do not rely solely on the detector to locate live AC wires. Always turn off power to the area you are working on at the circuit breaker before drilling or cutting.
• This device is intended for detecting objects behind common wall materials such as drywall, plywood, and concrete. Performance may vary with different materials or wall thicknesses.
• حافظ على الجهاز جافًا ونظيفًا. لا تعرضه للرطوبة أو درجات الحرارة القصوى.
• لا تحاول فتح الجهاز أو تعديله. لا توجد أجزاء قابلة للصيانة من قبل المستخدم في الداخل.
• تخلص من البطاريات بطريقة مسؤولة وفقًا للوائح المحلية.

3. مكونات المنتج

The LiebeWH HW-QB6 wall scanner features an ergonomic design for comfortable handling and a clear LCD display for easy interpretation of results.

Figure 2: Close-up of the LCD display and control buttons, including Power, Mode Selection, and AC detection.

المميزات الرئيسية:

• شاشة LCD: Provides visual indications for detection mode, signal strength, battery level, and center indication.
• زر الطاقة: يقوم بتشغيل/إيقاف تشغيل الجهاز.
• زر اختيار الوضع: Cycles through different detection modes (Wood, Metal, AC).
• مقبض مريح: مصمم لتوفير قبضة مريحة وآمنة أثناء الاستخدام.
• منطقة الاستشعار: Located on the back of the device, this area must be flat against the wall for accurate scanning.

4. الإعداد

4.1 تركيب البطارية

1. حدد مكان غطاء حجرة البطارية على الجزء الخلفي للجهاز.
2. قم بسحب الغطاء أو فكه لفتح الحجرة.
3. Insert one 9V (6F22) battery, ensuring the polarity (+/-) matches the diagram inside the compartment.
4. أغلق غطاء حجرة البطارية جيدًا.

Figure 3: Open battery compartment for 9V (6F22) battery installation.

4.2 المعايرة الأولية

For accurate results, the device must be calibrated before each use or when changing scanning locations.

1. اضغط على زر الطاقة لتشغيل الجهاز.
2. Place the device flat against the wall surface where you intend to scan, ensuring there are no known studs, metal, or wires in that specific spot.
3. Press and hold the Mode Selection button (or the dedicated calibration button if present, refer to display for indication) until the calibration process is complete (usually indicated by a beep or a stable display reading).
4. The device is now calibrated and ready for use.

5. تعليمات التشغيل

The LiebeWH HW-QB6 offers multiple detection modes for various materials. Select the appropriate mode for your task.

5.1 Selecting a Detection Mode

Press the Mode Selection button to cycle through the available modes. The selected mode will be indicated on the LCD display.

• Wood Stud Scan: For locating wood studs and joists.
• فحص المعادن: For detecting metal objects such as rebar, pipes, and metal conduit.
• فحص أسلاك التيار المتردد: For identifying live unshielded AC electrical wires.

5.2 إجراء المسح الضوئي

1. Ensure the device is calibrated as described in Section 4.2.
2. Place the device flat against the wall surface.
3. Slowly slide the device horizontally across the surface. Maintain constant contact with the wall.
4. Observe the LCD display for indications of detected objects.
5. When an object is detected, the signal strength indicator will increase, and an audible alert may sound. The "CENTER" indicator will illuminate when the device is directly over the center of the object.
6. Mark the edges and center of the detected object for accurate positioning.

Figure 4: Close-up of the LCD display showing a detected object with center indication and signal strength.

5.3 Interpreting the LCD Display

• Signal Strength Bars: Indicate proximity to a detected object. More bars mean closer proximity.
• CENTER Indicator: Appears when the device is directly over the center of a stud or object.
• رمز الوضع: Displays the currently selected detection mode (e.g., wood icon, metal icon, AC lightning bolt icon).
• مؤشر البطارية: Shows the current battery level. Replace batteries when low.
• Depth Indication (if applicable): Some models may show an approximate depth. Refer to the specific icons on your display.

6. الصيانة

• تنظيف: امسح الجهاز بقطعة ناعمة ، دamp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
• تخزين: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
• استبدال البطارية: Replace the 9V battery when the low battery indicator appears on the LCD display.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

• نموذج: HW-QB6
• أوضاع الكشف: Wood, Metal, AC Wire
• مصدر الطاقة: 1 x 9V (6F22) Battery (not included)
• أبعاد المنتج: Approximately 19L x 8W x 5H Centimetres
• وزن: Approximately 205 g (without battery)
• درجة حرارة التشغيل: 0 درجة مئوية إلى 40 درجة مئوية (32 درجة فهرنهايت إلى 104 درجة فهرنهايت)
• درجة حرارة التخزين: -10 درجة مئوية إلى 50 درجة مئوية (14 درجة فهرنهايت إلى 122 درجة فهرنهايت)

9. الضمان والدعم

For warranty information and technical support, please refer to the documentation provided with your purchase or contact LiebeWH customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official LiebeWH webالموقع أو الاتصال بقنوات الدعم الخاصة بهم.