Shark EVOPOWER SYSTEM FIT+ LC156JGY1 Cordless Stick Vacuum Cleaner User Manual

1. المقدمة

شكرا لك على الشراءasing the Shark EVOPOWER SYSTEM FIT+ LC156JGY1 Cordless Stick Vacuum Cleaner. This lightweight and powerful vacuum is designed to fit your lifestyle, featuring an automatic dust collection dock, iQ sensor technology for optimized suction, and a brushless power fin to prevent hair tangles. This manual provides essential information for safe and effective use of your new appliance.

Image: The Shark EVOPOWER SYSTEM FIT+ LC156JGY1 cordless stick vacuum cleaner with its automatic dust collection dock.

2. معلومات السلامة

Please read all instructions carefully before using your vacuum cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• هذا الجهاز مخصص للاستخدام المنزلي فقط.
• لا تستخدمه في الهواء الطلق أو على الأسطح المبللة.
• احتفظ بالشعر والملابس الفضفاضة والأصابع وجميع أجزاء الجسم بعيدًا عن الفتحات والأجزاء المتحركة.
• لا تلتقط أي شيء يحترق أو يصدر دخانًا، مثل السجائر أو أعواد الثقاب أو الرماد الساخن.
• لا تستخدمه بدون وجود وعاء الغبار والفلاتر في مكانها.
• استخدم فقط كما هو موضح في هذا الدليل.
• Always turn off the appliance before connecting or disconnecting the motorized nozzle, charging, or performing any maintenance.
• Store the vacuum in a dry indoor area.

3. محتويات العبوة

تأكد من وجود جميع المكونات في الحزمة الخاصة بك:

• وحدة الفراغ الرئيسية
• Automatic Dust Collection Dock (with charging function)
• Lithium-ion Battery (1, pre-installed in main unit)
• دليل المستخدم (هذا المستند)

4. التجميع والإعداد

اتبع الخطوات التالية لتجميع المكنسة الكهربائية الخاصة بك وتحضيرها للاستخدام الأول:

1. فك مكونات الحزمة: قم بإزالة كافة الأجزاء من العبوة بعناية.
2. قم بتجميع الوحدة الرئيسية: Connect the wand to the floor nozzle until it clicks into place. Then, connect the handheld vacuum to the top of the wand until it clicks.
3. Set up the Automatic Dust Collection Dock: Place the dock on a flat, stable surface near a power outlet.
4. شحن البطارية: Place the assembled vacuum cleaner onto the automatic dust collection dock. Ensure the charging contacts align. The battery will begin charging automatically. A full charge takes approximately 3.5 hours.

Image: The Shark EVOPOWER SYSTEM FIT+ LC156JGY1 vacuum cleaner in its assembled state.

5. التشغيل

5.1. البدء والتوقف

• To start the vacuum, press the power button on the handheld unit.
• To stop, press the power button again.

5.2. أوضاع التنظيف

Your vacuum features two cleaning modes:

• iQ Mode: This is the standard mode. The Shark iQ sensor automatically adjusts suction power based on the amount of debris detected, optimizing cleaning efficiency and battery life.
• وضع التعزيز: For stubborn dirt and deep cleaning, press the Boost button on the handheld unit to activate maximum suction power.

Image: The iQ sensor automatically adjusts suction power based on debris levels.

5.3. Handheld Conversion

To convert to a handheld vacuum for cleaning furniture, stairs, or tight spaces:

1. Press the release button on the handheld unit.
2. Pull the handheld unit away from the wand.
3. Attach any desired accessories (not included with this model, but available separately) to the handheld unit.

Image: Converting the stick vacuum to a handheld unit for versatile cleaning.

5.4. Automatic Dust Collection Dock

When you return the vacuum to its dock, the automatic dust collection feature will activate, transferring debris from the vacuum's dust cup to the dock's larger collection bin. This minimizes contact with dust and reduces the frequency of emptying the vacuum's small dust cup.

• The dock can hold approximately 30 days' worth of debris (based on 1 use per day; actual capacity may vary depending on environment).
• To temporarily stop the automatic dust collection process (e.g., at night), press the dedicated button on the dock.

Image: The automatic dust collection dock for convenient and hygienic debris disposal.

Image: Comparison of traditional dust emptying (dust flying) versus Shark's automatic, dust-free collection.

6. الصيانة

تضمن الصيانة المنتظمة الأداء الأمثل لمكنسة الكهرباء الخاصة بك.

6.1. Emptying the Dust Collection Dock

• When the dust collection bin on the dock is full, remove it and empty the contents into a trash can.
• The dock's dust box is washable. Rinse with water and allow to air dry completely before reinserting.

6.2. تنظيف الفلاتر

The vacuum's dust cup and filters are washable:

1. Remove the dust cup and filters from the handheld unit.
2. Rinse the dust cup and filters with cold water.
3. Allow all parts to air dry completely for at least 24 hours before reassembling. Do not use a hairdryer or other heating methods.

Image: The HEPA filter ensures clean exhaust, trapping fine dust and allergens.

Image: Washable components including the brush roll, dust cup, and filters for easy maintenance.

6.3. تنظيف أسطوانة الفرشاة

The brushless power fin design minimizes hair tangles. If any debris accumulates:

1. Turn off the vacuum and disconnect it from the dock.
2. Open the brush roll garage on the floor nozzle.
3. Remove any tangled hair or debris from the brush roll.
4. The brush roll can be rinsed with water. Ensure it is completely dry before reinserting.

Image: The brushless power fin effectively captures debris without tangling hair.

7. استكشاف الأخطاء وإصلاحها

إذا واجهت أية مشكلات، فارجع إلى دليل استكشاف الأخطاء وإصلاحها التالي:

8. المواصفات

9. الضمان والدعم

9.1. ضمان الشركة المصنعة

This Shark EVOPOWER SYSTEM FIT+ LC156JGY1 vacuum cleaner comes with a ضمان الشركة المصنعة لمدة عامين من تاريخ الشراء. يغطي هذا الضمان عيوب المواد والتصنيع في ظل الاستخدام المنزلي العادي. يُرجى الاحتفاظ بإيصال الشراء للمطالبة بالضمان.

9.2. دعم العملاء

For product support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact Shark customer service. Refer to the contact information provided on the official Shark webالموقع أو عبوة المنتج الخاص بك.

You can also visit the official Shark store on Amazon for additional information and accessories: Shark Official Store