Ledlenser TAC7R - Rechargeable LED Tactical Flashlight 3200 lm

1. انتهى المنتجview

The Ledlenser TAC7R is a high-performance tactical flashlight designed for critical illumination needs in demanding environments. It offers extreme power, intuitive controls, and maximum durability, making it suitable for law enforcement, security, and emergency services. Its hard-anodized aluminum body with diamond knurling is IP68 certified, resistant to water, dust, and drops up to 2 meters, ensuring reliable operation in the toughest conditions.

Image 1.1: The Ledlenser TAC7R tactical flashlight, showcasinبفضل تصميمه المتين.

الميزات الرئيسية

• Maximum Tactical Performance: Up to 3200 lumens in a robust 220g hard-anodized aluminum casing. IP68 certified for water, dust, and drop resistance up to 2m.
• Multi-Lens Tactical Beam: Advanced technology allows combining flood and spot illumination or using them separately. Includes Boost, High, Mid, Search, Check, Flash, and Strobe modes, with red, green, and blue light options. Maximum range of 370 meters.
• Intuitive Dual Control: Features a rear tactical switch and a mode selection ring for rapid switching between Flash, Strobe, RGB, and transport lock functions.
• Rechargeable and Durable: Powered by a replaceable 21700 Li-ion battery, rechargeable via USB-C in approximately 3 hours. Provides up to 30 hours of runtime, with integrated battery indicators.
• ضمان لمدة سنة واحدة: Backed by a 7-year warranty upon registration, ensuring product reliability and quality.

2. محتويات العبوة

Verify that all items are present in your Ledlenser TAC7R package:

• Ledlenser TAC7R Flashlight
• 21700 Li-ion Rechargeable Battery
• كابل شحن USB-C
• حزام يد قابل للتعديل
• Type G Belt Holster

Image 2.1: All components included in the Ledlenser TAC7R package.

3. الإعداد

3.1 تركيب البطارية

The Ledlenser TAC7R comes with a pre-installed 21700 Li-ion rechargeable battery. To access the battery compartment, unscrew the tail cap. Ensure the battery is securely seated with the positive (+) terminal facing towards the head of the flashlight before reattaching the tail cap.

3.2 شحن البطارية

To charge the flashlight, locate the USB-C charging port, typically protected by a rubber cover near the head of the flashlight. Open the cover and connect the supplied USB-C cable to the charging port and to a compatible USB power source (e.g., wall adapter, computer USB port). The integrated indicators will show the charging status. A full charge takes approximately 3 hours. Close the rubber cover securely after charging to maintain water and dust resistance.

Image 3.1: The Ledlenser TAC7R connected for USB-C charging, highlighting its powerful battery.

4. تعليمات التشغيل

4.1 تشغيل/إيقاف التشغيل

The flashlight is operated using the tactical rear switch. Press the switch firmly to turn the flashlight on or off. A half-press may activate momentary light or cycle through modes depending on the selected program.

4.2 اختيار الوضع

The mode selection ring, located near the rear switch, allows you to cycle through various lighting modes. Rotate the ring to select your desired mode. The ring provides tactile feedback for precise selection.

Image 4.1: Illustration of the quick control features, including Lock, Mission, RGB, and Flash modes, with a close-up of the mode selection ring.

4.2.1 Tactical Beam Modes (Multi-Lens Technology)

The Multi-Lens technology offers versatile beam patterns, allowing you to adapt the light to your specific needs:

• يفحص: Provides a wide flood beam only, ideal for close-range illumination.
• TAC Mid: Combines a wide flood beam with a focused spot beam for balanced illumination.
• TAC High: Offers an enhanced combination of wide flood and focused spot beam for maximum general illumination.
• يبحث: Delivers a maximum spot beam with a low flood component, optimized for long-distance searching.
• ستروب: A rapid flashing light function for signaling or disorienting targets.

Image 4.2: Diagram illustrating the various tactical beam patterns available with Multi-Lens Technology.

4.2.2 الأوضاع الخاصة

In addition to tactical beam modes, the TAC7R features special functions accessible via the mode selection ring:

• قفل: Activates a transport lock to prevent accidental activation during storage or transport.
• مهمة: A specific tactical light mode designed for particular operational scenarios.
• اللون الأحمر والأخضر والأزرق: Provides Red, Green, and Blue light options, ideal for night vision preservation, signaling, or specific operational needs where white light is not desired.
• فلاش: A quick signaling function for communication or emergency situations.

4.3 عرض فيديو

5. الصيانة والعناية

5.1 التنظيف

نظف جسم المصباح اليدوي بانتظام بقطعة قماش ناعمة و...amp cloth. Do not use abrasive cleaners or solvents, as these can damage the anodized finish. Keep the lens free of dirt, dust, and fingerprints for optimal light output. Use a lens cleaning cloth if necessary.

5.2 العناية بالبطارية

To prolong the life of your 21700 Li-ion battery, avoid fully discharging it frequently. It is recommended to store the flashlight with a partial charge (around 50%) if it will not be used for extended periods. The battery is replaceable; use only genuine Ledlenser replacement batteries.

5.3 مقاومة الماء والغبار

The TAC7R is IP68 rated, meaning it is protected against dust ingress and immersion in water up to 2 meters for 30 minutes. To maintain this rating, ensure all caps, covers (especially the USB-C port cover), and the tail cap are securely closed and tightened before exposing the flashlight to water or dusty environments.

Image 5.1: The Ledlenser TAC7R's compact and durable design, highlighting its IP68 rating and shock resistance.

6. استكشاف الأخطاء وإصلاحها

6.1 Flashlight Does Not Turn On

• Check the battery charge level. Recharge the battery if necessary.
• تأكد من إدخال البطارية بشكل صحيح مع مراعاة القطبية الصحيحة.
• Verify that the transport lock is not activated. Rotate the mode selection ring to unlock the flashlight.
• تأكد من أن غطاء الذيل مشدود بالكامل.

6.2 Dim Light Output

• Recharge the battery. Dim light is often an indication of a low battery.
• Clean the lens surface. Dirt or smudges can significantly reduce light output.
• Ensure the correct mode is selected; some modes are designed for lower lumen output to conserve battery.

6.3 قضايا الشحن

• Check the USB-C cable and power source for proper connection and functionality.
• Ensure the charging port on the flashlight is clean and free of debris.
• جرّب كابل USB-C أو محول طاقة مختلفًا.

7. المواصفات الفنية

Image 7.1: The Ledlenser TAC7R is constructed with 75% recycled aluminum, emphasizing sustainability.

8. الضمان ودعم العملاء

8.1 معلومات الضمان

The Ledlenser TAC7R comes with a standard 2-year manufacturer's warranty. This warranty can be extended by an additional 5 years (total of 7 years) upon online registration of your product. The warranty covers manufacturing defects and ensures the reliability and quality of your Ledlenser product.

8.2 تسجيل المنتج

To register your product and activate the extended 7-year warranty, please visit the official Ledlenser website and follow the instructions provided. Keep your proof of purchase for warranty claims.

8.3 دعم العملاء

For further assistance, technical support, or warranty claims, please visit the official Ledlenser webموقع (www.ledlenser.com) or contact your local authorized Ledlenser distributor. Please have your product model and serial number ready when contacting support.