RECOIL RLS8

RECOIL RLS8 8" Ultra-Thin Powered Under Seat Car Subwoofer

دليل التعليمات

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your RECOIL RLS8 8" Ultra-Thin Powered Under Seat Car Subwoofer. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage to the unit or your vehicle.

معلومات السلامة

  • افصل دائمًا الطرف السالب لبطارية السيارة قبل البدء بأي عمل كهربائي.
  • Ensure all wiring is properly routed and secured to prevent pinching, cutting, or short-circuiting.
  • استخدم الأسلاك ذات القياس المناسب لاتصالات الطاقة والأرض كما هو موضح في قسم التثبيت.
  • Avoid installing the subwoofer in locations where it may be exposed to moisture or excessive heat.
  • If you are unsure about any part of the installation process, seek assistance from a qualified professional car audio installer.
  • لا تقم بتشغيل مضخم الصوت الفرعي بمستويات صوت عالية للغاية لفترات طويلة، لأن ذلك قد يسبب تلفًا في السمع.

المنتج انتهىview والميزات

The RECOIL RLS8 is an 8-inch ultra-thin powered subwoofer designed to deliver enhanced bass performance in vehicles with limited space. It features a built-in Class D amplifier and includes a wired remote control for convenient bass level adjustments.

المميزات الرئيسية:

  • تصميم مضغوط: Ultra-thin 2.3-inch profile for discreet installation under seats.
  • مدمج Ampمكبر: Built-in 150W RMS Class-D amplifier eliminates the need for an external ampمكبر.
  • المدخلات المرنة: Supports both RCA and speaker-level inputs for compatibility with various head units.
  • التحكم عن بعد باس: Wired remote knob allows for on-the-fly bass level adjustments.
  • أدوات التحكم الصوتية القابلة للتعديل: Features variable low-pass filter (50-150Hz), bass boost (+18dB), and phase switch (0/180 degrees).
  • تشغيل تلقائي: Automatically activates and deactivates with the audio signal.
  • دوائر الحماية: Equipped with thermal, overload, and short-circuit protection for reliable operation.
RECOIL RLS8 8-inch powered subwoofer

Image: The RECOIL RLS8 8-inch powered subwoofer, showcasinبفضل تصميمه المدمج ومكوناته المتكاملة.

RECOIL RLS8 installed under a car seat

Image: The RECOIL RLS8 subwoofer discreetly installed under a car seat, demonstrating its space-saving design.

RECOIL RLS8 subwoofer in a car trunk

Image: The RECOIL RLS8 subwoofer positioned in a car trunk, highlighting its versatility for various vehicle types.

دليل التثبيت

يُعدّ التركيب الصحيح أمراً بالغ الأهمية لتحقيق الأداء الأمثل والسلامة. اتبع هذه الخطوات بعناية.

ما هو المتضمن:

RECOIL RLS8 accessory pack

Image: Contents of the RECOIL RLS8 accessory pack, including mounting brackets, Velcro strips, high-level input wiring harness, and remote knob.

التثبيت خطوة بخطوة:

  1. افصل البطارية: قبل البدء، افصل الطرف السالب لبطارية سيارتك لمنع حدوث ماس كهربائي.
  2. اختر موقع التركيب: Select a secure, dry location, typically under a seat or in the trunk. Ensure adequate ventilation around the unit. Use the included mounting brackets and screws for a firm installation.
  3. أسلاك الطاقة:
    • +12 فولت (طاقة): Connect a suitable gauge power wire (e.g., 8-gauge) directly from the vehicle's positive battery terminal to the +12V terminal on the subwoofer. Install an in-line fuse (not included, recommended 20A) within 18 inches of the battery.
    • GND (أرضي): Connect a short (less than 3 feet) and equally thick ground wire from the GND terminal on the subwoofer to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
    • REM (التشغيل عن بعد): Connect a remote turn-on wire from your head unit's remote output (typically blue/white wire) to the REM terminal on the subwoofer. This wire signals the subwoofer to turn on/off with your head unit. If your head unit lacks a remote output, the RLS8 features an auto turn-on function via high-level inputs.
  4. اتصال إدخال الصوت:
    • إدخال RCA: If your head unit has RCA pre-outs, connect RCA cables from the head unit to the RCA INPUTs (L and R) on the subwoofer.
    • مدخلات عالية المستوى: If your head unit does not have RCA pre-outs, use the included high-level input harness. Connect the speaker wires from your head unit (or factory speaker wires) to the corresponding wires on the high-level input harness. Plug the harness into the HIGH INPUT port on the subwoofer.
  5. مقبض الجهير البعيد: Connect the wired remote bass knob to the 'REMOTE' port on the subwoofer. Route the cable to a convenient location for the driver.
  6. إعادة توصيل البطارية: Once all connections are secure and verified, reconnect the negative battery terminal.

Wiring Diagram and Controls:

RECOIL RLS8 inputs and outputs diagram

الصورة: مفصلة view of the RECOIL RLS8's control panel, showing power/ground terminals, fuse, RCA inputs, high-level inputs, remote control port, and audio adjustment knobs (Phase, Low Pass, Bass Boost, Input Gain).

فيديو توضيحي للتثبيت:

Video: General installation guide for an under-seat subwoofer. While not specific to the RECOIL RLS8, this video provides a visual reference for the typical steps involved in installing a powered under-seat subwoofer, including wiring and placement considerations.

فيديو: انتهىview of the RECOIL SS65, a similar ultra-thin powered subwoofer. This video demonstrates the compact design and features common to RECOIL's under-seat subwoofer line, offering insight into the product's form factor and basic connections.

تعليمات التشغيل

Adjust the subwoofer settings to achieve optimal bass response for your vehicle and listening preferences.

تعديلات لوحة التحكم:

  • كسب الإدخال: This control matches the output level of your head unit to the subwoofer. Start with the gain at minimum, then slowly increase it until you hear distortion, then back off slightly.
  • مرشح الترددات المنخفضة (LPF): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust between 50Hz and 150Hz. A common starting point is 80-100Hz. Experiment to blend the subwoofer's output seamlessly with your main speakers.
  • تعزيز الجهير: This control provides an increase in bass output at a specific frequency. Use sparingly to avoid distortion. The RLS8 offers up to +18dB of bass boost.
  • مفتاح الطور (0°/180°): This switch helps to correct phase alignment issues between the subwoofer and your main speakers. Listen to music with strong bass and switch between 0° and 180° to determine which setting provides the most impactful and cohesive bass.
  • مقبض الجهير البعيد: This knob provides convenient control over the subwoofer's output level from the driver's seat. It adjusts the overall bass volume without affecting other settings.

تحديد

Detailed technical specifications for the RECOIL RLS8 subwoofer.

RECOIL RLS8 dimensions diagram

Image: Diagram illustrating the physical dimensions of the RECOIL RLS8 subwoofer, including length, width, and height.

ميزةالتفاصيل
رقم الموديلرلس8
نوع السماعةمكبر الصوت الفرعي
حجم السماعة8 بوصة
Ampنوع مكبرفئة D أحادية
طاقة خرج RMS150 واط
الحد الأقصى لقوة الإخراج300 واط
مقاومة2 أوم
مرشح الترددات المنخفضة50 هرتز - 150 هرتز (متغير)
تعزيز الجهير+18 ديسيبل
مفتاح الطور0 درجة / 180 درجة
تكنولوجيا الاتصالRCA، مدخلات عالية المستوى
نوع التركيبCar Mount (Under-seat)
أبعاد المنتج (الطول × العرض × الارتفاع)31.8 سم × 24.1 سم × 5.8 سم (12.5 بوصة × 9.5 بوصة × 2.3 بوصة)
وزن العنصر4.9 كجم (10.8 رطل)

استكشاف الأخطاء وإصلاحها

If you encounter issues with your RECOIL RLS8 subwoofer, refer to the following common problems and solutions:

  • لا يوجد طاقة:
    • Check the in-line fuse on the +12V power wire. Replace if blown.
    • Verify all power, ground, and remote turn-on connections are secure and properly connected.
    • تأكد من أن بطارية السيارة مشحونة بشكل كافٍ.
  • لا يوجد صوت:
    • Confirm the head unit is on and playing audio.
    • تحقق من توصيلات RCA أو الإدخال عالي المستوى للتأكد من التثبيت والاستمرارية.
    • Adjust the 'Input Gain' control on the subwoofer.
    • Ensure the head unit's subwoofer output (if applicable) is enabled and volume is up.
  • الصوت المشوه:
    • Reduce the 'Input Gain' setting.
    • Lower the 'Bass Boost' setting.
    • Check for loose speaker wires or damaged audio cables.
    • Ensure the subwoofer is not overdriven by the head unit.
  • Subwoofer Overheats:
    • Ensure adequate ventilation around the subwoofer. Do not block cooling fins.
    • Reduce the 'Input Gain' and 'Bass Boost' settings.
    • Verify the impedance of the connected speakers (if applicable) matches the subwoofer's requirements.

صيانة

To ensure the longevity and optimal performance of your RECOIL RLS8 subwoofer, follow these simple maintenance guidelines:

  • تنظيف: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
  • تهوية: Periodically check that the cooling fins and surrounding area are free from dust, debris, or obstructions that could impede airflow. Proper ventilation prevents overheating.
  • فحوصات الاتصال: Annually, or if you notice any performance issues, inspect all wiring connections (power, ground, remote, and audio inputs) to ensure they are secure and free from corrosion.
  • حماية البيئة: While designed for vehicle use, avoid prolonged exposure to extreme temperatures or direct moisture.

الضمان والدعم

For warranty information, technical support, or service inquiries, please contact RECOIL directly. Refer to your purchase documentation or the official RECOIL webالموقع الإلكتروني للاطلاع على أحدث شروط الضمان وتفاصيل الاتصال.

معلومات الاتصال بالشركة المصنعة:
نكص
3757 E Broadway Rd Suite 3
فينيكس، أريزونا 85040، الولايات المتحدة الأمريكية

You can also visit the official RECOIL store on Amazon for additional product information and support resources: RECOIL Store

© 2026 RECOIL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.