1. المقدمة
This manual provides detailed instructions for the RF1058-20 replacement remote control, designed for compatibility with Leggett & Platt Performance and Mattress Firm 600 Series adjustable bed frames. This remote is a pre-owned, tested unit. To ensure proper functionality, verify that the buttons and their labels on this remote precisely match your original remote control.
2. الإعداد
2.1 تركيب البطارية
- حدد موقع حجرة البطارية في الجزء الخلفي من جهاز التحكم عن بعد.
- قم بتحريك غطاء حجرة البطارية إلى الأسفل لفتحه.
- Insert three (3) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- أعد تركيب غطاء حجرة البطارية عن طريق تحريكه إلى مكانه حتى تسمع صوت طقطقة يثبت بإحكام.
الشكل 1: خلفي view of the RF1058-20 remote control with the battery compartment closed.
الشكل 2: خلفي view of the RF1058-20 remote control with the battery compartment open, revealing three AAA battery slots.
الشكل 3: مفصل view of the battery compartment cover, displaying model number RF1058-20, regulatory information, and battery type (3x AAA/LR03 1.5V). Regulatory marking: E116103 0214.
2.2 الاقتران (إذا لزم الأمر)
Most replacement remotes for Leggett & Platt adjustable bases are pre-programmed. If your bed does not respond after battery installation, follow these general pairing steps. Specific pairing instructions may vary slightly by bed model; refer to your bed frame's original manual for precise details if these steps are unsuccessful:
- Ensure the bed frame is plugged into a working power outlet.
- Locate the pairing button on the control box under your bed frame. This button is often small and recessed.
- Press and hold the pairing button on the control box for approximately 3-5 seconds until a light on the control box begins to flash.
- اضغط مع الاستمرار على الفور مستوي button on your new remote control for 3-5 seconds.
- Release the button. The light on the control box should stop flashing, indicating successful pairing.
- Test the remote by pressing various function buttons.
3. تعليمات التشغيل
The RF1058-20 remote control features a variety of buttons for adjusting your bed frame. Familiarize yourself with each function:
الشكل 4: الجبهة view of the RF1058-20 remote control with all function buttons.
- HEAD UP / HEAD DOWN: ضبط قسم رأس السرير إلى الأعلى أو الأسفل.
- FOOT UP / FOOT DOWN: ضبط قسم القدم في السرير لأعلى أو لأسفل.
- شخير: Activates a gentle head elevation to help reduce snoring.
- ZGRAV (انعدام الجاذبية): Positions the bed to a zero-gravity setting, elevating the head and foot to promote circulation and relieve pressure.
- ضوء: Toggles the under-bed lighting on or off (if your bed frame is equipped with this feature).
- قفل / فتح: Locks or unlocks the remote control to prevent accidental adjustments.
- تشغيل/إيقاف: Powers the bed frame on or off.
- M1, M2, M3, M4 (Memory Presets): Allows you to save and recall your favorite bed positions. To save a position, adjust the bed to your desired setting, then press and hold the desired memory button (M1-M4) until the bed briefly moves or a light flashes. To recall a saved position, simply press the corresponding memory button.
- مستوي: يعيد السرير إلى وضع مسطح تمامًا.
4. الصيانة
4.1 استبدال البطارية
Replace batteries when the remote's response becomes sluggish or stops working. Always use fresh AAA batteries. Refer to Section 2.1 for battery installation instructions.
4.2 التنظيف
امسح جهاز التحكم عن بُعد بقطعة قماش ناعمة وجافة. لا تستخدم منظفات سائلة أو مواد كاشطة، فقد تُتلف سطح جهاز التحكم عن بُعد أو مكوناته الداخلية.
4.3 التخزين
Store the remote in a dry place away from extreme temperatures and direct sunlight. If storing for an extended period, remove the batteries to prevent leakage.
5. استكشاف الأخطاء وإصلاحها
- جهاز التحكم عن بعد لا يستجيب:
- تأكد من تركيب البطاريات بشكل صحيح وأنها ليست فارغة. استبدلها إذا لزم الأمر.
- Ensure the bed frame is properly plugged into a working power outlet.
- Verify that the remote is not in 'LOCK' mode. Press the LOCK/UNLOCK button to toggle.
- Attempt to re-pair the remote control with the bed frame (refer to Section 2.2).
- Bed Only Moves Partially or Jerkily:
- Check for any obstructions under the bed frame that might be impeding movement.
- Ensure the power cord is securely connected to both the wall outlet and the bed frame's control box.
- Remote Buttons Feel Sticky or Unresponsive:
- قم بتنظيف جهاز التحكم عن بعد كما هو موضح في القسم 4.2.
6. المواصفات
- رقم الموديل: RF1058-20
- أبعاد المنتج: 7 × 2 × 0.5 بوصة
- وزن السلعة: 4 أونصات
- البطاريات المطلوبة: بطاريتين AAA
- الشركة المصنعة: Leggett & Platt (for compatible bed frames)
- الأجهزة المتوافقة: Leggett & Platt Performance/Mattress Firm 600 Series Bed Frames
- المميزات الخاصة: مريح وخفيف الوزن
- لون: اسود/ابيض
- الحد الأقصى لعدد الأجهزة المدعومة: 1
7. الضمان والدعم
As a pre-owned replacement part, this remote control may not carry a direct manufacturer's warranty from Leggett & Platt. Please refer to the seller's return policy or any specific warranty information provided at the time of purchase.
For technical assistance or warranty support related to this specific remote control, please contact:
Warranty Support: 844.628.8376
When contacting support, please have your remote control model number (RF1058-20) and purchase details available.
