ANDELI 135A MIG Welder & 30Amp 50ft Welder Extension Cord

ANDELI 135A MIG Welder and 30Amp 50ft Welder Extension Cord Instruction Manual

Model: 135A MIG Welder & 30Amp 50ft Welder Extension Cord

1. المقدمة

This manual provides essential information for the safe and efficient operation of your new ANDELI 135A MIG Welder and the accompanying 30Amp 50ft Welder Extension Cord. Please read these instructions thoroughly before initial use to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

2. معلومات السلامة

تحذير: قد يكون اللحام خطيراً. اتبع دائماً احتياطات السلامة لتجنب الإصابة الخطيرة أو الوفاة.

  • ارتدِ دائمًا معدات الحماية الشخصية المناسبة، بما في ذلك خوذة اللحام ذات الظل المناسب، وقفازات اللحام، والملابس الواقية، وأحذية السلامة.
  • تأكد من وجود تهوية كافية في منطقة العمل لتجنب استنشاق أبخرة اللحام.
  • احمِ المارة من أشعة القوس الكهربائي والمعادن الساخنة.
  • لا تقم باللحام بالقرب من المواد القابلة للاشتعال.
  • تأكد من تأريض جهاز اللحام بشكل صحيح.
  • Inspect all cables and connections for damage before each use. Replace damaged components immediately.
  • Do not operate the welder in wet conditions.
  • افصل الطاقة قبل إجراء أي صيانة أو تغيير الملحقات.

3. محتويات العبوة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

  • ANDELI 135A MIG Welder Unit
  • 30Amp 50ft Welder Extension Cord (NEMA 6-50P to 6-50R)
  • Gasless Flux Core Wire
  • حامل القطب الكهربائي
  • لحام الشعلة
  • الأرض Clamp
  • Premium Auto-Darkening Welding Helmet (convertible to goggles)
  • Professional Leather Welding Gloves
  • دليل المستخدم
ANDELI 135A MIG Welder and included accessories
Image 3.1: The ANDELI 135A MIG Welder with all included accessories, such as the welding helmet, gloves, torch, ground clamp, electrode holder, and flux core wire.

4. انتهى المنتجview

The ANDELI 135A MIG Welder is a versatile 3-in-1 machine designed for Flux Core Gasless MIG, Lift TIG, and MMA (Stick) welding. It features dual voltage capability (110V/220V) for adaptability to various power sources and project requirements. The included 30Amp 50ft extension cord provides a safe and reliable power connection for your welding tasks.

4.1 Welder Features

  • Multiprocess Capability: Supports Flux Core Gasless MIG, Lift TIG (torch sold separately), and MMA welding.
  • حجم مزدوجtage: يعمل على مصادر طاقة بجهد 110 فولت و220 فولت.
  • توافق الأسلاك: Compatible with 0.030", 0.035", and 0.040" flux-core wire.
  • سمك المادة: Capable of welding mild steel up to 5.0 mm (0.19") thick.
  • ضوابط قابلة للتعديل: Features adjustable Hot Start and Arc Force functions for stick welding.
ANDELI MIG-135PLUS Welder features compared to others
Image 4.1: Comparison highlighting the ANDELI MIG-135PLUS features, including dual voltage, wire compatibility, maximum thickness, complete kit, and synergetic control.

4.2 Extension Cord Features

  • طول: 50 feet for extended reach and safety.
  • كَيّل: 10 AWG (American Wire Gauge) for heavy-duty applications.
  • Ampإيراج: 30 Amp سعة.
  • الموصلات: NEMA 6-50P plug to NEMA 6-50R receptacle.
  • بناء: 3 conductors with 100% copper and 35% thicker insulation. STW jacket for durability and weather resistance.
  • أمان: ETL listed for safe and reliable power supply.
NEMA 6-50P plug and 6-50R receptacle of the extension cord
Image 4.2: Close-up of the NEMA 6-50P plug and 6-50R receptacle on the extension cord, indicating its robust construction and certification.

5. الإعداد

5.1 إعداد اللحام

  1. الموقع: Position the welder on a stable, level surface in a well-ventilated area, away from flammable materials.
  2. الأرض Clamp اتصال: قم بتوصيل السلك الأرضيamp cable to the appropriate terminal on the welder and securely attach the clamp قم بتوصيل السلك بقطعة العمل أو طاولة اللحام. تأكد من وجود اتصال كهربائي جيد.
  3. توصيل شعلة اللحام: Connect the welding torch cable to the designated port on the welder.
  4. Wire Installation (MIG): Open the wire feed compartment. Install the flux core wire spool, ensuring it is properly seated. Thread the wire through the feed rollers and into the torch liner. Adjust the wire tension as needed.
  5. Electrode Holder Connection (MMA): For MMA welding, connect the electrode holder cable to the appropriate terminal.
  6. TIG Torch Connection (Lift TIG, optional): If using Lift TIG, connect the TIG torch (sold separately) to its designated port.

5.2 Extension Cord Connection

ال30Amp 50ft Welder Extension Cord is designed to provide a safe and extended power connection for your welder.

  1. فحص الحبل: Before each use, visually inspect the entire length of the extension cord, including the plug and receptacle, for any signs of damage, cuts, or fraying. Do not use a damaged cord.
  2. الاتصال بمصدر الطاقة: Plug the NEMA 6-50P end of the extension cord into a compatible 250V, 30Amp NEMA 6-50R wall receptacle.
  3. Connect Welder: Plug the welder's power cord into the NEMA 6-50R receptacle of the extension cord.
  4. Route Safely: Route the extension cord to avoid tripping hazards, sharp edges, or areas where it could be crushed or damaged.

6. تعليمات التشغيل

The ANDELI 135A Welder supports multiple welding processes. Always refer to the welder's control panel for specific settings and adjustments.

ANDELI 135A MIG Welder control panel showing 4-in-1 modes
Image 6.1: The welder's control panel illustrating the selection options for SYN MIG, MAN MIG, MMA, and Lift TIG welding modes.

6.1 Powering On and Dual Voltagهـ الاختيار

  1. تأكد من أن جميع التوصيلات آمنة.
  2. Turn on the main power switch on the welder.
  3. The welder automatically detects the input voltagهـ (110 فولت أو 220 فولت).
  4. For 110V operation, the welder is suitable for lighter tasks. For 220V, it provides robust output for thicker metals and industrial power.
Comparison of 110V and 220V welding applications
Image 6.2: Visual representation of 110V power for lighter tasks and 220V power for thicker metals, demonstrating the welder's dual voltagالقدرة الإلكترونية.

6.2 Flux Core Gasless MIG Welding

  1. Select the MIG mode on the control panel.
  2. اضبط سرعة تغذية السلك وحجمهtage according to the material thickness and wire diameter. The welder may offer synergetic control for simplified settings.
  3. تأكد من أن قطعة العمل نظيفة ومؤرضة بشكل صحيح.
  4. Begin welding, maintaining a consistent travel speed and arc length.

6.3 لحام MMA (العصا)

  1. Select the MMA mode.
  2. أدخل القطب الكهربائي المناسب في حامل القطب الكهربائي.
  3. ضبط amperage based on the electrode type and material thickness.
  4. Adjust Hot Start and Arc Force functions as needed for optimal arc ignition and stability.
  5. Strike the arc and maintain a steady hand for a quality weld.

6.4 Lift TIG Welding (Torch Sold Separately)

  1. Select the TIG mode.
  2. Ensure a TIG torch with a tungsten electrode is connected.
  3. ضبط ampإيراج.
  4. Touch the tungsten to the workpiece to initiate the arc (Lift Arc), then lift slightly to establish the arc.
  5. Feed filler rod manually if required.

7. الصيانة

Regular maintenance ensures the longevity and safe operation of your welding equipment.

  • تنظيف: Periodically clean the welder's exterior and internal components (using compressed air) to remove dust and metal particles. Ensure the power is disconnected before cleaning.
  • فحص الكابلات: Regularly inspect all welding cables, power cords, and connections for wear, cuts, or damage. Replace any damaged parts immediately.
  • صيانة الشعلة: Clean the welding torch nozzle and contact tip regularly. Replace worn contact tips.
  • نظام تغذية الأسلاك: Check the wire feed rollers for wear and ensure they are clean and free of debris. Adjust tension as needed.
  • Extension Cord Care: Store the extension cord coiled neatly in a dry place. Avoid kinking or bending the cord sharply.

8. استكشاف الأخطاء وإصلاحها

يرجى الرجوع إلى الجدول التالي للتعرف على المشكلات الشائعة وحلولها.

مشكلةالسبب المحتملحل
لا يعمل جهاز اللحامNo power supply; Faulty power cord/extension cord; Welder switch offCheck power outlet; Inspect power cords; Turn on welder switch
لا يوجد قوسPoor ground connection; Incorrect settings; Damaged torch/electrode holderEnsure good ground contact; Verify settings; Inspect and replace damaged components
مشاكل تغذية الأسلاك (MIG)Incorrect wire tension; Clogged liner; Worn contact tip; Wrong roller sizeAdjust wire tension; Clean/replace liner; Replace contact tip; Use correct rollers
جودة لحام رديئةIncorrect settings; Dirty workpiece; Improper techniqueضبط المجلدtage/amperage/wire speed; Clean workpiece; Practice welding technique
Extension cord overheatingOverload; Damaged cord; Improper gauge for loadReduce load; Inspect cord for damage; Ensure cord gauge matches requirements

9. المواصفات

9.1 ANDELI 135A MIG Welder

  • حجم الإدخالtage: 110 فولت/220 فولت مجلد مزدوجtage
  • عمليات اللحام: Flux Core Gasless MIG, Lift TIG, MMA
  • أقصى سمك للمادة: 5.0 mm (0.19") mild steel
  • Compatible Wire: 0.030", 0.035", 0.040" flux-core wire

9.2 30Amp 50ft Welder Extension Cord

  • طول: 50 قدم
  • مقياس الأسلاك: 10 مقياس سلكي
  • Ampإيراج: 30 Amp
  • المجلدtage: 250 فولت
  • الموصلات: NEMA 6-50P to NEMA 6-50R
  • الموصلات: 3 (100% copper)
  • Jacket Type: STW (Hard Service, Thermoplastic, Weather Approved)
  • مقاومة الحرارة: تصل إلى 221 درجة فهرنهايت (105 درجة مئوية)
  • المرونة: Remains flexible down to -40°F (-40°C)
  • شهادة: تم إدراج ETL
Cross-section of SOW cable showing copper conductors and insulation
Image 9.1: Diagram illustrating the internal structure of the SOW cable, highlighting 100% copper conductors and thick insulation for durability and conductivity.
Extension cord performance across temperature ranges
Image 9.2: Visual demonstrating the extension cord's ability to maintain performance and flexibility across extreme temperatures, from 221°F to -40°F.
Comparison of ANDELI extension cord features with generic cords
Image 9.3: A comparison highlighting the superior features of the ANDELI 50ft 30Amp extension cord, including its ETL listing, increased heat resistance, and flexibility at low temperatures, versus less secure alternatives.

10. الضمان والدعم

For warranty information and customer support, please refer to the documentation included with your purchase or contact ANDELI customer service directly. Keep your purchase receipt as proof of purchase.

© 2025 ANDELI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.