AIXZGLOBAL AIC45II Plasma Cutter User Manual

معلومات هامة حول السلامة

Before operating the AIXZGLOBAL AIC45II Plasma Cutter, read and understand all safety warnings and instructions. Failure to follow these instructions may result in electric shock, fire, serious injury, or death. Keep this manual for future reference.

• خطر الصدمة الكهربائية: Always ensure the machine is properly grounded. Do not operate in wet conditions. Never touch live electrical parts. Disconnect power before servicing.
• Fume Hazard: Plasma cutting produces fumes and gases. Work in a well-ventilated area. Use local exhaust ventilation or respirators if necessary.
• حماية العين والجلد: Always wear a welding helmet with appropriate shade, safety glasses, and protective clothing (gloves, long sleeves, heavy pants) to protect against arc rays, sparks, and hot metal.
• خطر الحريق والانفجار: Sparks and hot metal can cause fires. Keep flammable materials away from the cutting area. Have a fire extinguisher readily available. Do not cut containers that have held flammable materials.
• خطر الحرق: Hot metal and equipment can cause severe burns. Allow materials to cool before handling.
• خطر الضوضاء: Plasma cutting can be noisy. Wear hearing protection.

المنتج انتهىview

The AIXZGLOBAL AIC45II Plasma Cutter is a versatile and efficient cutting machine designed for various metal fabrication tasks. It features advanced non-touch pilot arc technology for smooth starts on rough or rusty surfaces, extending consumable life and ensuring cleaner cuts. Equipped with robust IGBT inverter technology, it provides stable and efficient cutting performance with a 60% duty cycle. The machine supports dual voltage input (110V/220V) and includes an XT45 low-frequency cutting gun for reliable arc initiation.

The AIXZGLOBAL AIC45II Plasma Cutter main unit, showcasinبفضل تصميمها المدمج ولوحة التحكم.

Compact and portable design of the AIXZGLOBAL AIC45II Plasma Cutter, showing its dimensions and weight for easy transport.

Diagram illustrating the non-high frequency operation of the plasma cutter, indicating low signal interference, safety for electrical equipment and human health, and low noise output.

Comparison highlighting the AIXZGLOBAL AIC45II's non-HF, lightweight, and non-touch cutting advantages over traditional heavy, HF, and touch-cutting machines.

محتويات الحزمة

Verify that all items listed below are included in your package. If any items are missing or damaged, contact AIXZGLOBAL customer support immediately.

• AIXZGLOBAL AIC45II Plasma Cutter Unit
• XT45 Cutting Torch
• الأرض Clamp
• فلتر الهواء منظم
• خرطوم الهواء
• Torch Accessories (Nozzles, Electrodes)
• Raw Meal Belt
• طوق

All components included with the AIXZGLOBAL AIC45II Plasma Cutter: the main unit, ground clamp, air hose, air filter regulator, cutter torch, hoop, torch accessories, and raw meal belt.

تعليمات الإعداد

1. فك التعبئة

Carefully remove the plasma cutter and all accessories from the packaging. Inspect for any shipping damage. Retain packaging for future transport or storage.

2. توصيل الطاقة

The AIC45II operates on both 110V and 220V power supplies. Ensure your power source matches the machine's requirements and is equipped with an appropriate circuit breaker. Connect the power cord securely to a grounded outlet.

3. Air Compressor and Filter Regulator Connection

A clean, dry air supply is crucial for optimal performance. Connect your air compressor to the air filter regulator. Then, connect the air filter regulator to the plasma cutter's air inlet. Ensure all connections are tight to prevent air leaks. The air filter regulator helps remove moisture and oil from the air supply.

مفصل view of the air filter regulator installation, showing air input, gas connection, and pressure gauge. Installation takes approximately 30 seconds and ensures stable operation.

4. الشعلة والتوصيل الأرضيamp اتصال

Connect the XT45 cutting torch to the designated port on the front panel of the plasma cutter. Secure the connection firmly. Attach the ground clamp cable to the appropriate terminal and ensure the clamp is securely fastened to the workpiece or work table, providing a good electrical connection. A poor ground connection can affect cutting performance.

تعليمات التشغيل

1. تشغيل الطاقة

After all connections are made, turn on the main power switch located on the plasma cutter. The digital display will illuminate.

2. Adjusting Cutting Current

Use the control knob on the front panel to adjust the cutting current (Amperage) according to the material type and thickness. The LCD digital display will show the current setting. The AIC45II offers a DC output current range of 15-45A.

3. Selecting 2T/4T Mode

The plasma cutter supports both 2T (Two-Touch) and 4T (Four-Touch) modes. Select the appropriate mode using the switch on the control panel:

• 2T Mode: Press and hold the torch trigger to start the arc and cut. Release the trigger to stop. This mode is suitable for short cuts.
• 4T Mode: Press and release the trigger to start the arc. Press and release again to stop. This mode is ideal for longer cuts, reducing operator fatigue.

4. Non-Touch Pilot Arc Operation

The non-touch pilot arc feature allows for easy arc initiation without direct contact between the torch tip and the workpiece. This is particularly beneficial for cutting painted, rusty, or expanded metals. Position the torch approximately 1/8 inch (3mm) above the material before pressing the trigger.

An operator using the non-touch plasma cutter on a metal surface, demonstrating the pilot arc feature for clean and efficient cutting.

5. Cutting Guidelines

The AIC45II is capable of cutting various metals including stainless steel, carbon steel, aluminum, copper, and titanium. It can achieve clean cuts through 10mm (approximately 3/8 inch) and has a maximum cutting thickness of 16mm (approximately 5/8 inch).

• ل clean cuts up to 8mm, use 110V power with approximately 35A and 60 PSI air pressure.
• ل maximum cuts up to 16mm, use 220V power with approximately 45A and 80 PSI air pressure.

Adjust cutting speed and torch distance from the workpiece to achieve optimal cut quality. Maintain a steady hand and consistent travel speed for best results.

Illustration of the AIXZGLOBAL AIC45II Plasma Cutter's cutting capabilities, showing clean cuts up to 8mm at 110V/35A/60PSI and maximum cuts up to 16mm at 220V/45A/80PSI.

صيانة

تضمن الصيانة الدورية طول عمر جهاز قطع البلازما الخاص بك وأدائه الأمثل.

1. Air Filter Regulator Cleaning

Periodically check the air filter regulator for accumulated moisture and debris. Drain any collected water and clean or replace the filter element as needed to ensure a clean and dry air supply to the machine.

2. Consumable Inspection and Replacement

Inspect the torch consumables (nozzle, electrode, swirl ring, shield cup) regularly for wear. Worn consumables can lead to poor cut quality and reduced performance. Replace them as necessary. Always use genuine AIXZGLOBAL replacement parts.

3 تنظيف بشكل عام

Keep the plasma cutter unit clean and free from dust and metal particles. Use compressed air to blow out any debris from the ventilation openings. Ensure all cables and connections are in good condition.

استكشاف الأخطاء وإصلاحها

يوفر هذا القسم حلولاً للمشكلات الشائعة التي قد تواجهها.

If the problem persists after attempting these solutions, contact AIXZGLOBAL customer support for further assistance.

تحديد

Technical specifications for the AIXZGLOBAL AIC45II Plasma Cutter.

الضمان والدعم

For warranty information, technical support, or to purchase replacement parts, please contact AIXZGLOBAL customer service. Refer to your purchase documentation for specific warranty terms and contact details.

AIXZGLOBAL Customer Support: Please refer to the contact information provided with your product or visit the official AIXZGLOBAL webموقع.