USX MOUNT XTL908 Heavy Duty Tilting TV Wall Mount Instruction Manual

1. انتهى المنتجview

The USX MOUNT XTL908 is a heavy-duty tilting TV wall mount designed for large televisions ranging from 60 to 120 inches. It supports TVs weighing up to 220 lbs and features a low-profile design, positioning the TV just 2.6 inches from the wall. The mount is compatible with VESA patterns up to 900x600mm and can be installed on wood studs (16-32 inches apart), concrete, or brick walls.

Image 1.1: The USX MOUNT XTL908 TV Wall Mount installed in a modern living room setting.

Image 1.2: The ultra-slim profile of the mount, showing the TV positioned close to the wall.

2. معلومات السلامة

Read all instructions carefully before installation. If you have any questions, consult a qualified installer. Improper installation can result in serious injury or damage.

• قدرة الوزن: Do not exceed the maximum weight capacity of 220 lbs (100 kg). This mount is intended for use only with the maximum weights indicated.
• حجم التلفزيون: تم تصميم هذا الحامل للتلفزيونات التي يتراوح حجمها بين 60 و120 بوصة.
• نوع الجدار: Install only on wood studs, solid concrete, or brick walls. لا install on drywall alone.
• تباعد المسامير: Ensure wood studs are spaced between 16 and 32 inches apart.
• أدوات التثبيت: Use only the provided mounting hardware. If you require concrete anchors, please contact customer support.
• Integrity Test: After installation, perform an integrity test by gently pulling on the mount to ensure it is securely fastened to the wall.

Image 2.1: The robust construction of the mount, designed to securely hold TVs up to 220 lbs.

3. محتويات العبوة

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact customer support.

• تجميع لوحة الحائط
• حوامل التلفزيون (2)
• Mounting Hardware Kit (screws, washers, spacers, anchors for concrete/brick)
• قالب التركيب
• دليل التعليمات

4. المواصفات

Image 4.1: Visual representation of VESA patterns supported and the maximum load capacity of 220 lbs.

Image 4.2: Technical drawing showing the dimensions of the TV interface and wall plate.

الصورة 4.3: أخرى view of the product dimensions, highlighting key measurements.

5. الإعداد والتثبيت

Before you begin, ensure you have all necessary tools and that your wall type is suitable for this mount. The installation video below provides a visual guide.

5.1 فحوصات ما قبل التثبيت

• تحقق من توافق التلفزيون: Check your TV's weight and VESA mounting pattern to ensure it falls within the mount's specifications (60-120 inches, up to 220 lbs, VESA up to 900x600mm).
• تحديد نوع الجدار: Determine if your wall is wood stud, solid concrete, or brick.

Image 5.2: The mount is suitable for wood studs (16-32" spacing), solid concrete, and brick walls. Not for drywall alone.

5.2 تركيب حوامل التلفزيون

Depending on your TV's back, choose the appropriate option:

1. For Flat TV Back: Align the TV brackets with the VESA holes on the back of your TV. Secure them using the appropriate screws and washers from the hardware kit. Do not overtighten.
2. For Irregular TV Back: If your TV has an irregular or curved back, use the provided spacers to create a flat mounting surface before attaching the brackets.

5.3 تركيب لوحة الحائط

Use the provided mounting template to mark the drill holes on your wall. Ensure the template is level before marking.

• للأعمدة الخشبية: Locate the center of your wood studs. Drill pilot holes (7/32 in. / 5.5mm diameter, 2.5 in. / 64mm depth). Secure the wall plate using lag bolts and washers. Do not use plastic anchors for wood studs.
• للجدران الخرسانية/الطوبية: Drill pilot holes (3/8 in. / 10mm diameter, 2.5 in. / 64mm depth). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.

After securing the wall plate, perform an integrity test by pulling on the mount to ensure it is firmly attached to the wall.

Image 5.3: Simplified 3-step installation process: 1. Attach TV brackets, 2. Mount wall plate, 3. Hang up TV.

5.4 Hanging and Securing the TV

1. Carefully lift the TV with the attached brackets and hook them onto the top edge of the wall plate.
2. قم بإنزال التلفزيون برفق حتى تثبت الأقواس بالكامل في لوحة الحائط.
3. Use the quick lock and release pull tabs to secure the TV to the wall plate, preventing accidental dislodgement.

6. تعليمات التشغيل

6.1 ضبط زاوية الميل

The USX MOUNT XTL908 allows for easy tilt adjustment to optimize your viewing angle and reduce glare. The mount can tilt 5 degrees upwards and 12 degrees downwards.

• To adjust the tilt, loosen the tilting adjustment knobs located on the TV brackets.
• قم بإمالة التلفزيون إلى الزاوية التي تريدها.
• Tighten the tilting adjustment knobs to secure the TV in place.

Image 6.1: The tilt function allows for easy adjustment up to +5° and down to -12° to reduce glare.

Image 6.2: The mount's tilt range for optimal viewجي من مواقع مختلفة.

6.2 Quick Lock and Release

The mount features pull tabs for easy locking and releasing of the TV from the wall plate.

• ل قفل the TV, ensure the pull tabs are pushed upwards into the locked position after hanging the TV.
• ل يطلق the TV, gently pull down on the cords attached to the tabs. This will unlock the TV from the wall plate, allowing you to lift it off.

Image 6.3: The adjustable pull tabs for easy locking and releasinز من التلفزيون.

Image 6.4: Illustration of pulling the cords to release the TV from the mount.

7. الصيانة

تضمن الصيانة المنتظمة طول عمر وتشغيل حامل التلفزيون الخاص بك بشكل آمن.

• تنظيف: امسح الحامل بقطعة قماش ناعمة وجافة لإزالة الغبار. تجنب استخدام المنظفات الكاشطة أو المذيبات.
• الفحوصات الدورية: Periodically check all screws and bolts to ensure they are tight and secure. Re-tighten if necessary.
• فحص الضرر: Inspect the mount for any signs of wear, corrosion, or damage. If any issues are found, contact customer support and do not use the mount until it is repaired or replaced.

8. استكشاف الأخطاء وإصلاحها

If you encounter any issues during or after installation, refer to the following common problems and solutions.

9. الضمان والدعم

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official USX MOUNT webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.

If you have any questions or require additional assistance, please do not hesitate to contact USX MOUNT customer service.