معلومات هامة حول السلامة
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- تم تصميم هذا السخان لـ hardwired installation only. It is not a plug-in unit.
- هذا السخان does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- يجب أن يتم التركيب بواسطة كهربائي مؤهل وفقًا لجميع قوانين الكهرباء الوطنية والمحلية.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
الإعداد والتثبيت
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
التركيب
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
الربط الكهربائي
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
تعليمات التشغيل
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- تشغيل الطاقة: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- ضبط منظم الحرارة: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- التشغيل الهادئ: This convector heater operates silently, providing consistent warmth without fan noise.
- الاستخدام الأولي: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
صيانة
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- تنظيف: قم بتنظيف الجزء الخارجي من السخان بشكل دوري باستخدام قطعة قماش ناعمة.amp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- إزالة الغبار: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- تقتيش: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- لا تعيق: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
استكشاف الأخطاء وإصلاحها
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| السخان لا يعمل. | لا يوجد مصدر للطاقة. ضبط الترموستات منخفض جدًا. Faulty wiring or thermostat. | تحقق من قاطع الدائرة. زيادة ضبط الثرموستات. استشر كهربائيًا مؤهلًا. |
| السخان ينتج حرارة غير كافية. | Room size exceeds heating capacity. انسداد في تدفق الهواء. مشكلة في معايرة منظم الحرارة. | Ensure heater matches room size (up to 150 sq ft). قم بإزالة العوائق من فتحات التهوية. Recalibrate or replace thermostat. |
| روائح غير معتادة أثناء التشغيل. | Initial burn-off of manufacturing residues. تراكم الغبار على عنصر التسخين. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
إذا استمرت المشكلة بعد تجربة هذه الحلول، فاتصل بدعم عملاء ستيلبرو أو بفني كهربائي مؤهل.
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | ستلبرو |
| رقم الموديل | ASHC1502WCW |
| واتtage | 1500 واط (عند 240 فولت) / 1125 واط (عند 208 فولت) |
| المجلدtage | 240 فولت |
| Ampإيراج | 6.25 Amps |
| أبعاد المنتج (العمق × العرض × الارتفاع) | 3.94 بوصة × 28.63 بوصة × 17.56 بوصة (101 مم × 727 مم × 446 مم) |
| وزن العنصر | 15.7 رطل |
| تغطية التدفئة | Up to 150 sq feet |
| المميزات الخاصة | Energy Efficient, Fast Heating, Noiseless |
| عامل الشكل | مجلس الوزراء |
| لون | أبيض |
| نوع التركيب | حامل الحائط |
| نوع الوقود | كهربائي |
| الاستخدام الداخلي والخارجي | داخلي |
| رمز المنتج الموحد | 626296203491 |
ضمان
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- ضمان محدود لمدة سنة واحدة على الوحدة بأكملها.
- ضمان مدى الحياة على عنصر التسخين.
- ضمان لمدة سنتين on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro webموقع.
يدعم
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro webموقع: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.