مقدمة
Thank you for choosing the BLNAN Flat LED Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before use and retain it for future reference.
معلومات السلامة
- افصل دائمًا مصدر الطاقة من قاطع الدائرة الرئيسي قبل محاولة أي عملية تثبيت أو صيانة أو تنظيف.
- يجب أن يتم التثبيت بواسطة كهربائي مؤهل إذا كنت غير متأكد من الأسلاك الكهربائية.
- تأكد من مستوى الصوتtage supply matches the requirements specified for this product (230V).
- This product is designed for indoor use only. Do not expose it to water or high humidity.
- Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
- احتفظ بمواد التغليف بعيدًا عن متناول الأطفال.
محتويات الحزمة
يرجى التأكد من أن جميع المكونات موجودة وغير تالفة:
- 1 x BLNAN Flat LED Ceiling Light
- دليل تعليمات واحد (هذه الوثيقة)
- Mounting hardware (screws, wall anchors, wire connectors)
مواصفات المنتج
| ماركة | بلنان |
| رقم الموديل | LS-CL-I4-24W--CCT/N |
| قوة | 24 واط |
| إخراج اللومن | 2400 لومن |
| درجة حرارة اللون | 2000K (Night Light), 3000K (Warm White), 4000K (Neutral White), 5000K (Cool White) |
| المجلدtage | 230 فولت |
| مادة | بولي كربونات |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 30 سم × 30 سم × 2.5 سم |
| عمر | أكثر من 30,000 ساعة |
| نوع التركيب | Flush Mount, Ceiling Mount |
| المميزات الخاصة | Adjustable Color Temperature, Night Light Function, Memory Function, Over-voltage, short-circuit, and overheat protection |
| استخدام الغرفة الموصى به | Balcony, Bedroom, Kitchen, Office, Basement, Bathroom, Living Room, Hallway |
تعليمات التثبيت
Before beginning installation, ensure the power supply is turned off at the circuit breaker.
- Prepare the Light Fixture: Rotate the light fixture counterclockwise to detach the mounting base from the main lamp جسم.
- حدد درجة حرارة اللون: Before mounting, locate the small switch on the back of the lamp body. Use this switch to select your desired main light color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White). This setting is fixed after installation.
- Fix the Mounting Base: Position the mounting base on the ceiling where you intend to install the light. Mark the screw holes. Drill pilot holes if necessary and secure the mounting base to the ceiling using the provided screws and wall anchors. Ensure the screw distance is approximately 7cm-9cm.
- ربط الأسلاك: Carefully connect the electrical wires from your ceiling to the corresponding terminals on the mounting base. Typically, this involves connecting the Live (L), Neutral (N), and Ground (E) wires. Ensure all connections are secure.
- نعلق L.amp جسم: Align the main lamp body with the installed mounting base. Push the lamp body upwards and rotate it clockwise until it locks securely into place.
تعليمات التشغيل
Main Light and Night Light Function
This ceiling light features a main light mode (24W, 2400LM) and a unique 2000K amber night light mode (5W).
- To activate Main Light: Turn your wall switch ON. The light will illuminate in the previously selected main color temperature (3000K/4000K/5000K).
- To activate Night Light: Quickly toggle your wall switch OFF and then ON again (ON-OFF-ON sequence). The light will switch to the soft 2000K amber night light mode.
- To return to Main Light: Toggle your wall switch OFF and then ON again from the night light mode.
وظيفة الذاكرة
The light features a memory function that recalls the last selected lighting mode (main light or night light).
- Turn on the ceiling light and select your desired lighting mode.
- Keep the light in this mode for at least 30 seconds.
- Turn off the light for at least 10 seconds.
- The next time you turn on the light, it will automatically restore the previously selected mode.
صيانة
- تنظيف: تأكد من فصل التيار الكهربائي قبل التنظيف. استخدم قطعة قماش ناعمة وجافة أو مبللة قليلاً.amp cloth to wipe the surface of the light fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- استبدال المصباح: This LED ceiling light uses integrated LED chips that are designed for long-term use (over 30,000 hours) and are not user-replaceable.
- تقتيش: Periodically check the light fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يعمل. | لا يوجد مصدر للطاقة. اتصال الأسلاك فضفاضة. مفتاح الحائط معيب. | تحقق من قاطع الدائرة. Ensure all wires are securely connected (power off first). Test the wall switch with another device. |
| وميض الضوء. | مصدر الطاقة غير مستقر. اتصال الأسلاك فضفاضة. | Ensure stable power. Check wiring connections (power off first). |
| Night light mode does not activate. | Incorrect switch sequence. | Ensure a quick ON-OFF-ON sequence on the wall switch. |
| Main light color temperature cannot be changed. | Color temperature is set during installation. | The main light color temperature (3000K/4000K/5000K) is selected via a switch on the back of the lamp before installation and cannot be changed during normal operation. |
معلومات الضمان
This BLNAN product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact your retailer for specific terms, conditions, and duration of the warranty.
دعم العملاء
For technical assistance, troubleshooting not covered in this manual, or any other inquiries, please contact your retailer or visit the official BLNAN webموقع للدعم.