1. المقدمة
This manual provides essential information and step-by-step instructions for the proper installation and maintenance of your new JayTong LCD Replacement for Infinix Smart 10 X6725. Please read this manual thoroughly before beginning the installation process to ensure correct procedure and prevent damage to your device or the replacement part.
2. معلومات السلامة
- قم دائمًا بإيقاف تشغيل جهازك تمامًا وفصل البطارية قبل البدء في أي عملية إصلاح.
- Handle all components, especially the flex cables, with extreme care to avoid damage.
- Wear anti-static gloves if available to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
- Work in a clean, well-lit, and organized environment.
- If you are not confident in your ability to perform the repair, seek professional assistance.
3. ماذا يوجد في الصندوق
يجب أن تحتوي الحزمة الخاصة بك على العناصر التالية:
- 1 x JayTong LCD Replacement Screen for Infinix Smart 10 X6725
- 1 x Set of basic installation tools (may include screwdrivers, prying tools, suction cup)
This image displays the JayTong LCD Replacement screen for the Infinix Smart 10 X6725, alongside the basic set of tools provided for installation, including screwdrivers, prying tools, and a suction cup.
لقطة مقرّبة view of the essential repair tools included with the LCD replacement kit. These tools are designed to assist in the careful disassembly and reassembly of the smartphone during the screen replacement process.
ملحوظة: Additional specialized tools (e.g., heat gun, spudgers, adhesive) may be required depending on the specific phone model and existing adhesive. These are not included in the basic kit.
4. الإعداد والتثبيت
4.1 اختبار ما قبل التثبيت
It is crucial to test the new LCD assembly before full installation. Do not remove any protective films or tags until the screen has been fully tested and confirmed functional. Returns cannot be accepted for screens where installation attempts have been made or protective films removed.
- Carefully clean the flex cable of the new screen and the corresponding slot on the motherboard.
- Connect the new screen's flex cable securely to the motherboard. Do not apply excessive force.
- Ensure the device's battery is sufficiently charged and that the motherboard is not damaged.
- Power on the device. Test the display for clarity, color accuracy, and dead pixels. Test the touch functionality across the entire screen.
- If the screen functions correctly, proceed with the full installation. If not, disconnect and recheck connections, or contact support.
4.2 خطوات التثبيت (دليل عام)
This is a general guide. Specific disassembly and reassembly steps may vary by phone model. Refer to device-specific repair guides if available.
- جهاز إيقاف التشغيل: Ensure your Infinix Smart 10 X6725 is completely powered off.
- إزالة درج بطاقة SIM: أخرج درج بطاقة SIM.
- غطاء خلفي مفتوح: Carefully use prying tools to separate the back cover from the phone frame. Heat may be required to soften adhesive.
- افصل البطارية: Locate and disconnect the battery flex cable from the motherboard to prevent short circuits.
- إزالة الشاشة القديمة: Disconnect the old screen's flex cables. Carefully remove the damaged screen from the frame. Heat may be needed to loosen adhesive.
- إطار نظيف: Remove any remaining adhesive or glass fragments from the phone frame. A clean surface is essential for proper adhesion of the new screen.
- ضع المادة اللاصقة (إذا لزم الأمر): Apply new adhesive to the phone frame if required (not included).
- تثبيت شاشة جديدة: Carefully place the new LCD assembly into the frame, ensuring proper alignment.
- توصيل الكابلات المرنة: Reconnect the new screen's flex cables to the motherboard.
- إعادة توصيل البطارية: أعد توصيل كابل البطارية المرن.
- الاختبار مرة أخرى: Power on the device and perform a final test of the display and touch functions.
- إعادة تجميع الجهاز: If all tests pass, reattach the back cover and secure any screws.
حذر: Do not force any components. If you encounter resistance, re-evaluate the step. Improper installation can cause irreversible damage to the screen or phone.
5. التشغيل
Once installed, the JayTong LCD Replacement operates identically to the original screen. Power on your Infinix Smart 10 X6725 as usual. The display should illuminate, and touch input should be responsive. If you experience any issues, refer to the Troubleshooting section.
6. الصيانة
- تنظيف: استخدم قطعة قماش ناعمة وخالية من الوبر وامسحها برفق.ampened with water or a screen cleaner to gently wipe the screen. Avoid harsh chemicals or abrasive materials.
- حماية: Consider using a screen protector and a protective case to prevent future damage from drops or scratches.
- تجنب الضغط: Do not apply excessive pressure to the screen, as this can damage the LCD panel or digitizer.
- درجة حرارة: Avoid exposing the device to extreme temperatures, which can affect screen performance and longevity.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الشاشة لا تعمل / لا يوجد عرض | Flex cable not properly connected; Damaged screen; Motherboard issue; Battery not charged. | Ensure flex cables are securely connected. Re-test the screen. Check battery charge. If problem persists, the screen may be faulty or the motherboard damaged. |
| Touch screen unresponsive / Partial touch | Touch flex cable not properly connected; Damaged digitizer; Software glitch. | Check touch flex cable connection. Restart the device. If problem persists, the digitizer may be faulty. |
| Display issues (lines, discoloration, flickering) | LCD flex cable damaged or improperly connected; Damaged LCD panel. | Ensure LCD flex cable is securely connected. Re-test the screen. If problem persists, the LCD panel may be faulty. |
| Screen detaches from frame | Insufficient or improper adhesive application. | Reapply appropriate adhesive to secure the screen to the frame. Ensure proper curing time. |
إذا لم تنجح خطوات استكشاف الأخطاء وإصلاحها في حل المشكلة، فيرجى الاتصال بدعم العملاء.
8. المواصفات
- النموذج المتوافق: Infinix Smart 10 X6725
- يكتب: LCD Display Touch Screen Assembly
- لون: أسود
- أبعاد الحزمة: 6 × 3 × 0.4 بوصة
- وزن السلعة: 3.52 أونصات
- الشركة المصنعة: نوعي
9. الدعم
For any questions, concerns, or issues regarding the JayTong LCD Replacement for Infinix Smart 10 X6725, please contact the seller directly through the platform where the purchase was made. Provide your order number and a detailed description of the issue for prompt assistance.
