Veken 55 x 28 Inch Electric Standing Desk User Manual

1. المقدمة

Thank you for choosing the Veken 55 x 28 Inch Electric Standing Desk. This desk is designed to provide a versatile and ergonomic workspace, allowing you to easily switch between sitting and standing positions. Please read this manual carefully before assembly and use to ensure proper operation and safety.

2. معلومات هامة حول السلامة

• Always follow the user manual for proper assembly and use.
• لا تتجاوز الحد الأقصى للوزن المحدد 154 رطل (70 كجم) to ensure stability and prevent damage.
• Use the desk in a well-lit area and keep it away from heat sources.
• Be cautious when adjusting the height to avoid injury or pinching.
• Always maintain proper ergonomics when using the desk to prevent strain.
• تأكد من إدارة جميع الكابلات بشكل صحيح لمنع مخاطر التعثر أو التلف أثناء تعديلات الارتفاع.

3. محتويات العبوة

يرجى التأكد من وجود جميع المكونات قبل البدء في التجميع:

• Desktop (joined pieces)
• Desk Legs (cold-rolled steel frame)
• لوحة التحكم مع إعدادات الذاكرة المسبقة
• Motor and Transmission Rod
• مقطع الكابل
• Feet Pads (4x)
• خطاف سماعة الرأس
• دليل المستخدم (هذا المستند)
• All necessary assembly tools (hex key, screws)

4. تعليمات التجميع

Assembly is designed to be straightforward. All holes are pre-drilled, and accessories are pre-labeled for ease of installation. It is recommended to assemble the desk on a soft, clean surface to prevent scratches.

دليل التجميع خطوة بخطوة

1. فك مكونات الحزمة: Carefully remove all parts from the packaging. Verify against the package contents list.
2. تجميع أرجل المكتب: Attach the desk legs to the main frame using the provided screws. Ensure all connections are secure.
3. تركيب ذراع ناقل الحركة: Insert the transmission rod between the two legs. Ensure it is correctly aligned and secured.
4. إرفاق سطح المكتب: Carefully place the desktop onto the assembled frame. Align the pre-drilled holes and secure the desktop with the provided screws. Be careful not to overtighten screws to avoid stripping the particle board.
5. Install Control Panel and Accessories: Attach the control panel to the underside of the desktop in the designated area. Install the headphone hook and cable clips as desired.
6. توصيل الطاقة: Connect the power cable to the control panel and then to a power outlet.

Figure 1: Quick and Simple Installation Overview

دليل فيديو التجميع

5. تعليمات التشغيل

The Veken Electric Standing Desk features an intuitive control panel for easy height adjustment and personalized settings.

ضبط الارتفاع

• The desk offers a wide height range from 27.9 بوصة إلى 45.6 بوصة.
• استخدم أعلى (▲) و لأسفل (▼) arrow buttons on the control panel to manually adjust the desk to your desired height.

إعدادات الذاكرة المسبقة

The control panel includes four memory preset buttons (1, 2, 3, 4) to save and quickly recall your preferred sitting and standing heights.

1. لحفظ إعداد مسبق: Adjust the desk to your desired height using the arrow buttons. Press and hold one of the numbered preset buttons (1-4) until the display flashes or beeps, indicating the height has been saved.
2. لاستدعاء إعداد مسبق: Simply press the corresponding numbered preset button (1-4). The desk will automatically move to the saved height.

Figure 2: Desk Dimensions and Height Range

Ergonomic Design & Features

• حافة منحنية مريحة: The desktop features a smooth, human-centric curved edge to reduce arm strain and allow easy access to items, enhancing comfort and productivity.
• Spacious Worksurface: The 55" x 28" desktop accommodates multiple monitors and office supplies, providing ample space for an organized workflow.
• خطاف سماعة الرأس: A convenient hook is included for hanging headphones or bags, keeping your workspace tidy.

Figure 3: Ergonomic Desktop Design

6. الصيانة

To ensure the longevity and optimal performance of your Veken Electric Standing Desk, follow these maintenance guidelines:

• تنظيف: امسح سطح المكتب والإطار بقطعة قماش ناعمة.amp القماش. تجنب المواد الكيميائية القاسية أو المنظفات الكاشطة التي قد تؤدي إلى إتلاف الطبقة النهائية.
• إدارة الكابلات: Periodically check and adjust cable clips to keep wires tidy and prevent them from getting caught during height adjustments.
• فحص المثبتات: Occasionally inspect all screws and fasteners to ensure they are tight. Retighten if necessary, but avoid overtightening.
• العناية بالمحرك: The motor is designed for durability. If you notice any unusual sounds or resistance during adjustment, refer to the troubleshooting section.

7. استكشاف الأخطاء وإصلاحها

If you encounter any issues with your Veken Electric Standing Desk, please refer to the following common problems and solutions:

• Desk Not Adjusting / Uneven Legs: If one leg is not moving synchronously with the other, or the desk is not adjusting, it may indicate an incorrect installation of the transmission rod. Ensure the transmission rod is fully inserted into the hexagonal nut on the left leg's hole position.
• Vibration During Adjustment: A slight vibration when lowering the desk might occur. This is often due to the legs catching slightly. Regular use typically smooths this out. If persistent, ensure all connections are secure.
• Stripped Screw Holes: The desktop is made of particle board. When assembling, avoid overtightening screws to prevent stripping the pre-drilled holes. If a hole is stripped, consider using wood glue and a larger screw, or a repair kit.

Troubleshooting Video Guide

8. المواصفات

Figure 4: Desk Load-Bearing Capacity

9. الضمان والدعم

ضمان الشركة المصنعة: This product comes with a limited manufacturer warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included in your product packaging or contact Veken customer support.

دعم العملاء: If you have any questions, suggestions, or require assistance with your Veken Electric Standing Desk, please do not hesitate to contact Veken customer support. Contact information can typically be found on the product packaging or the official Veken webموقع.