مقدمة
This manual provides detailed instructions for the installation, operation, and maintenance of the Fricpart-145791 replacement water inlet valve for Whirlpool GU2700XTSS1 dishwashers. Please read these instructions carefully before proceeding with installation to ensure proper function and safety.
معلومات السلامة
- Always disconnect power to the dishwasher before attempting any repairs or installations.
- قم بإيقاف إمداد المياه لغسالة الأطباق قبل البدء في العمل.
- ارتدِ معدات الحماية الشخصية المناسبة، مثل القفازات وحماية العين.
- إذا لم تكن متأكدًا من أي خطوة، فاستشر فني أجهزة مؤهلًا.
- Ensure all connections are secure and leak-free before restoring power and water.
المنتج انتهىview
The water inlet valve controls the flow of water into your dishwasher. This replacement part is designed to be compatible with Whirlpool GU2700XTSS1 dishwasher models.
الشكل 1: Fricpart-145791 Replacement Water Inlet Valve. This image shows the complete valve assembly, including the brass threaded inlet, the plastic outlet, and the electrical solenoid connection.
المميزات الرئيسية:
- Direct replacement for Whirlpool GU2700XTSS1 dishwashers.
- Ensures proper water fill levels.
- تصميم متين لأداء موثوق.
الإعداد والتثبيت
Before beginning, ensure you have the necessary tools: screwdriver, pliers, towels, and a bucket to catch any residual water.
- فصل الطاقة: افصل غسالة الأطباق عن مأخذ الكهرباء أو قم بإيقاف تشغيل قاطع الدائرة الذي يزود غسالة الأطباق بالطاقة.
- إيقاف تشغيل مصدر المياه: Locate the water shut-off valve for the dishwasher (usually under the sink) and turn it off.
- الوصول إلى الصمام: Depending on your dishwasher model, you may need to remove the lower access panel or pull the dishwasher out from its cabinet to access the water inlet valve.
- استنزاف المياه المتبقية: Place towels and a bucket under the water inlet valve to catch any water that may drain when disconnecting the water line.
- Disconnect Water Line: Use pliers to carefully disconnect the water supply line from the old inlet valve.
- افصل الموصل الكهربائي: Unplug the electrical connector from the old valve's solenoid. Note its orientation for reinstallation.
- إزالة الصمام القديم: Unscrew or unclip the old water inlet valve from its mounting bracket.
- تثبيت صمام جديد: Mount the new Fricpart-145791 valve onto the bracket, ensuring it is secure.
- توصيل الموصل الكهربائي: قم بتوصيل الموصل الكهربائي بإحكام بالملف اللولبي للصمام الجديد.
- Connect Water Line: Reattach the water supply line to the new valve. Ensure the connection is tight to prevent leaks.
- استعادة إمدادات المياه: Slowly turn on the water shut-off valve. Check for any leaks around the new valve and connections. Tighten if necessary.
- اعادة الطاقة: قم بتوصيل غسالة الأطباق مرة أخرى أو قم بتشغيل قاطع الدائرة.
- عملية الاختبار: Run a short wash cycle to verify proper water fill and check for leaks during operation.
تعليمات التشغيل
Once the new water inlet valve is installed, the dishwasher's operation should return to normal. The valve functions automatically based on the dishwasher's cycle programming.
- تأكد من أن مصدر المياه مفتوح بالكامل.
- Select your desired wash cycle on the dishwasher control panel.
- Start the dishwasher. The new valve will open and close as required to fill the dishwasher with the correct amount of water for each stagه من دورة الغسيل.
- Monitor the first few cycles after installation to confirm proper water intake and absence of leaks.
صيانة
The water inlet valve itself typically requires no routine maintenance. However, regular checks of the surrounding components can help ensure its longevity and proper function.
- فحص التسرب: Periodically check the water supply line connections to the valve for any signs of leaks. Address any drips immediately.
- Water Filter Screen: Some water inlet valves have a small filter screen at the inlet connection to prevent debris from entering. If your dishwasher experiences slow filling, you may need to turn off the water, disconnect the supply line, and clean this screen.
- General Dishwasher Maintenance: Follow your dishwasher's manufacturer recommendations for general cleaning and maintenance to prevent issues that could indirectly affect the valve.
استكشاف الأخطاء وإصلاحها
If you encounter issues after installing the new water inlet valve, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Dishwasher not filling with water. |
|
|
| Dishwasher overfilling or continuously filling. |
|
|
| Water leak at valve connection. |
|
|
If these steps do not resolve the issue, it is recommended to contact a qualified appliance repair technician.
تحديد
- رقم القطعة: Fricpart-145791 (FRIC-PL-APP-TP-22052025-057680)
- التوافق: Whirlpool GU2700XTSS1 Dishwasher
- الشركة المصنعة: فريكبارتس
- كمية حزمة المنتج: 1
- لون: Black/White (referring to components, not overall unit)
- ASIN: B0FBLD2GCW
الضمان والدعم
For warranty information or technical support regarding this replacement part, please refer to the seller's policy or contact the manufacturer, Fricparts, directly. The product was first available on June 1, 2025.
بائع: Fricgore
سياسة العائدات: 30 يومًا (استرداد الأموال/الاستبدال)