AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit Instruction Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's electric ride-on cars, offering a 2.4G remote control system with a slow start function for enhanced safety.

يرجى قراءة هذا الدليل جيداً قبل التركيب والاستخدام لضمان الأداء السليم والسلامة.

معلومات السلامة

• Ensure the electric vehicle's power is OFF before installing or replacing any components.
• Always verify that the replacement parts match the original specifications (e.g., model number, voltagهـ) لمنع الضرر.
• Regularly inspect the vehicle's motor, battery, and wiring for any signs of wear or damage. Replace faulty components immediately.
• Keep electronic components away from water and excessive moisture.
• Adult supervision is required during installation and when children operate the ride-on car.

محتويات الحزمة

The AirheadStorm CLB084-4D kit includes the following components:

• 1 x Receiver (CLB084-4D 12V Control Box)
• 1 x Remote Control (2.4G White Remote Control)

Image: The CLB084-4D receiver and its corresponding 2.4G remote control. The receiver is a black box with wiring, and the remote is white with black buttons.

الإعداد والتثبيت

1. التحقق من التوافق

Before installation, ensure that the CLB084-4D 12V control box is compatible with your children's ride-on toy. This model is compatible with CLB084-4C 12V systems. Visually compare the appearance and model number of the new parts with your original components.

Image: A comparison showing the CLB084-4A/4C/4D remote (white light indicator) and receiver on the left, and the CLB084-4F remote (red light indicator) and receiver on the right. This helps identify the correct model for replacement.

2. فحوصات ما قبل التثبيت

Verify that other essential functions of the ride-on car, such as the motor and battery, are in normal working condition before installing the new controller and remote.

3. خطوات التثبيت

1. Turn off the power to the children's electric vehicle.
2. Carefully remove the old receiver (control box) from the vehicle. Note the wiring connections.
3. Connect the new CLB084-4D receiver to the vehicle's wiring harness, ensuring all connections are secure and match the original configuration.
4. Secure the receiver in its designated location within the vehicle.

تعليمات التشغيل

1. عملية التحكم عن بعد

Image: Diagram illustrating the buttons on the 2.4G remote control, including Forward/Backward, Left/Right movement, Emergency Stop, and Speed Adjustment buttons, along with gear indicator lights.

1. زر الطاقة: اضغط لتشغيل جهاز التحكم عن بعد.
2. Signal Matching: To match the remote control with the receiver:
   • Ensure the vehicle's power is OFF.
   • اضغط مع الاستمرار على "زر تعديل السرعة" و "زر التوقف في حالات الطوارئ" simultaneously for 5 seconds.
   • While holding, turn on the vehicle's power.
   • When the gear indicator light on the remote control illuminates steadily (does not flash), the signal is successfully matched. The front wheels of the vehicle will turn left and right for one second to confirm.
   • The matching process is available for approximately 2 minutes after the vehicle is powered on.

2. وظائف التحكم عن بعد

• Forward/Backward Button: Controls the vehicle's movement direction.
• Left/Right Movement Button: Controls the vehicle's steering.
• زر التوقف في حالات الطوارئ: Immediately stops the vehicle.
• زر تعديل السرعة: Cycles through different speed settings (1st, 2nd, 3rd gear, indicated by lights).

3. وضع السكون

The remote control will enter sleep mode if there is no operation for approximately 1 minute. To reactivate, press any button.

صيانة

• Keep the remote control and receiver clean and dry. Wipe with a soft, dry cloth.
• تجنب إسقاط المكونات أو تعريضها لصدمات قوية.
• قم بتخزين المجموعة في مكان بارد وجاف عند عدم استخدامها.
• Check battery compartment of the remote control periodically for corrosion and replace batteries as needed.

استكشاف الأخطاء وإصلاحها

تحديد