Gedsffati HD08-G Gas and CO Detector User Manual

مقدمة

The Gedsffati HD08-G is a direct insertion combined gas and carbon monoxide (CO) detector designed for home use. It provides real-time monitoring of gas and CO concentrations, offering audible and visual alarms to enhance safety. This manual provides essential information for the proper installation, operation, and maintenance of your detector.

معلومات هامة حول السلامة

• اقرأ جميع التعليمات بعناية قبل التثبيت والاستخدام.
• هذا الجهاز مخصص للاستخدام الداخلي فقط.
• Do not paint the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
• Do not block the ventilation openings of the detector.
• Regularly test the detector as instructed in this manual.
• In case of an alarm, follow the emergency procedures outlined in the operating section.
• This detector is not a substitute for proper maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.

المنتج انتهىview والميزات

The HD08-G detector features high-precision sensors for reliable detection of combustible gases (Natural Gas, LPG, Methane, Propane, Butane) and Carbon Monoxide. Its 2.1-inch HD color screen provides clear, real-time information.

المميزات الرئيسية:

• High-precision sensors for gas and CO detection.
• High-definition colorful large screen display (2.1-inch, 240*296 resolution, IPS ultra broad perspective).
• Audible and visual alarm system.
• Fault self-check function.
• تركيب التوصيل والتشغيل.
• Real-time monitoring of gas and CO concentration, temperature, and humidity.

عناصر:

The device includes a main display unit with three control buttons (H, O, D) and an intelligent power indicator light.

الصورة: الجبهة view of the Gedsffati HD08-G detector highlighting its display and features like high precision sensors and audible/visual alarm.

الصورة: انفجرت view illustrating the internal high-precision sensors and sensitive detection performance of the HD08-G detector.

الإعداد والتثبيت

The HD08-G detector is designed for simple plug-and-play installation.

1. اختر الموقع المناسب:
   • For gas detection: Install near gas appliances (e.g., stove, water heater) where gas leaks might occur. Combustible gases like LPG and propane are heavier than air and tend to sink, so place the detector lower. Natural gas and methane are lighter than air and rise, so place it higher.
   • For CO detection: Install at breathing height, typically 1.5 meters (5 feet) from the floor. Avoid placing it directly above heat sources or in areas with high humidity.
   • Ensure the detector is not obstructed by furniture, curtains, or other objects.
2. Plug in the detector: Insert the detector directly into a standard electrical outlet. The device will power on automatically.
3. Initial self-check: Upon powering on, the detector will perform a self-check. The intelligent power indicator light will show green if normal.

الصورة: السابقamples of suitable installation locations for the HD08-G detector in different environments, emphasizing its versatility for home and travel.

تعليمات التشغيل

معلومات العرض:

The 2.1-inch HD color screen displays the following information:

• ثاني أكسيد الكربون جزء في المليون: Carbon Monoxide concentration in parts per million.
• الغاز: Combustible gas concentration, often represented by a bar graph or numerical value.
• درجة حرارة: Ambient temperature (e.g., in °F or °C).
• رطوبة: نسبة الرطوبة النسبيةtage.
• أيقونات الحالة: Icons for sound, alarm, and light sensor.

Image: The detector's display showing real-time monitoring of CO and combustible gas concentrations, along with temperature and humidity.

الصورة: مفصلة view of the 2.1-inch HD color screen display, highlighting its clarity and technical specifications.

وظيفة الاختبار الذاتي:

To perform a manual self-test:

• Short press the 'O' button on the front of the detector.
• The device will initiate a self-test sequence, activating the alarm and checking sensor functionality.
• The intelligent power indicator light will show green for normal operation. A red light indicates a mute error or sensor malfunction.

Image: Illustration of the intelligent power indicator light and the self-test function, explaining the meaning of green and red light indicators.

Alarm Indications:

When gas or CO concentration reaches dangerous levels, the detector will activate an audible and visual alarm.

• إنذار مسموعة: A loud siren will sound.
• إنذار مرئي: The screen will display alarm messages, and the indicator light will turn red.

Image: The detector in an alarm state, demonstrating the sound and light alarm to prevent danger, with CO and gas levels displayed.

في حالة الإنذار:

1. لا تُصب بالذعر.
2. فتح النوافذ والأبواب لتهوية المنطقة.
3. Turn off all gas appliances and sources.
4. إخلاء المبنى على الفور.
5. اتصل بمورد الغاز الخاص بك أو خدمات الطوارئ من مكان آمن.
6. Do not re-enter the premises until it has been declared safe by professionals.

صيانة

• التنظيف المنتظم: Gently wipe the detector's exterior with a soft, damp cloth. Do not use cleaning agents, solvents, or abrasive materials.
• الاختبار الشهري: Perform the self-test function (short press 'O' button) at least once a month to ensure proper operation.
• تجنب العوائق: Ensure that the detector's ventilation openings are not blocked by dust, dirt, or other objects.
• عمر المستشعر: Gas and CO sensors have a limited lifespan. Refer to the product specifications or manufacturer's guidelines for replacement recommendations.

استكشاف الأخطاء وإصلاحها

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Gedsffati customer support.

تحديد

الضمان والدعم

For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. For technical support or further assistance, please contact Gedsffati customer service through their official webالموقع الإلكتروني أو بيانات الاتصال المرفقة مع عبوة المنتج.