mGYDY Bafang 810S LCD eBike Display User Manual

1. المقدمة

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. معلومات السلامة

• Always ensure the display is securely mounted before riding.
• Do not attempt to disassemble or modify the display. This may void the warranty and cause damage.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. انتهى المنتجview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

صورة: زيادةview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

المميزات الرئيسية:

• Color VA LCD: واسع viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• عرض البيانات الشاملة: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltagه بيرسينtagهـ).
• سطوع قابل للتعديل: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• وضع المشي: Provides assistance when walking alongside your e-bike.
• عرض رمز الخطأ: يشير إلى وجود أعطال في النظام.
• درجة مقاومة الماء: IP65, resistant to rain and splashing water.

5. المواصفات

صورة: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. الإعداد والتثبيت

التحقق من التوافق:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the بروتوكول الاتصالات UART و أ 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

صورة: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

خطوات التثبيت:

1. تركيب الشاشة: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. قم بتوصيل الكابل: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. إدارة الكابلات: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. التشغيل الأولي: After installation, power on your e-bike to verify the display functions correctly.

7. تعليمات التشغيل

The 810S display features an intuitive interface with an independent button for navigation and settings.

وظائف العرض:

• مؤشر السرعة: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Mileage Indicator: Displays Odometer (total distance), Trip distance, and Riding Time.
• مؤشر البطارية: Provides a 5-level power indicator and voltagه بيرسينtage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• التحكم في المصابيح الأمامية: Activate or deactivate your e-bike's headlight (if connected).
• وضع المشي: Engage for low-speed assistance when pushing the bike.
• رمز الخطأ: Displays codes if a system fault is detected.

صورة: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

تعديل الإعدادات:

• ضبط السطوع: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• كلمة مرور التشغيل: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

صورة: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. الصيانة

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• تنظيف: استخدمي قطعة قماش ناعمةamp cloth to clean the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
• مقاومة الماء: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• تخزين: عند عدم استخدام الدراجة الكهربائية لفترات طويلة، قم بتخزينها وعرضها في مكان جاف وبارد، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• فحص الاتصال: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

صورة: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. استكشاف الأخطاء وإصلاحها

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• الشاشة لا تعمل:
  • Check if the e-bike battery is charged and turned on.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• تم عرض رمز الخطأ:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• قراءات غير دقيقة:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

If problems persist, contact the seller or a qualified e-bike technician for assistance.

10. الضمان والدعم

للحصول على معلومات الضمان ودعم العملاء، يرجى الرجوع إلى الوثائق المقدمة وقت الشراء أو الاتصال بالبائع. احتفظ بإثبات الشراء لتقديم مطالبات الضمان.