دليل مستخدم آلة الضغط الحراري لحافظات الهواتف HTVRONT

1. المقدمة

The HTVRONT Phone Case Heat Press Machine is an advanced auto 3D vacuum heat press designed for sublimation printing on various items, including phone cases, badges, and coasters. It features precise temperature control and a universal mold compatible with popular iPhone models, ensuring high-quality, full-surface transfers with vibrant colors.

This manual provides detailed instructions for the safe and effective use of your HTVRONT heat press machine. Please read it thoroughly before operation.

Image: The HTVRONT Phone Case Heat Press Machine in lavender purple, shown with included accessories such as a phone case fixture, heat-resistant gloves, and sublimation film.

2. معلومات السلامة

يجب عليك دائمًا مراعاة احتياطات السلامة التالية لمنع الإصابة أو إتلاف الجهاز:

• Keep hands and fingers away from the heating plates during operation. The plates reach high temperatures.
• Use heat-resistant gloves when handling hot items or components.
• تأكد من وضع الجهاز على سطح مستقر ومقاوم للحرارة.
• لا تقم بتشغيل الجهاز بالقرب من المواد القابلة للاشتعال.
• افصل الجهاز عن مأخذ الطاقة عندما لا يكون قيد الاستخدام أو قبل التنظيف.
• لا تغمر الجهاز في الماء أو أي سائل آخر.
• يحفظ بعيدًا عن متناول الأطفال.
• Only use the machine for its intended purpose as described in this manual.

3. مكونات المنتج

The HTVRONT Phone Case Heat Press Kit includes the following items:

• HTVRONT H17 Phone Case Heat Press (x1)
• Phone Case Fixture Set (x1)
• Badge Fixture Set (x1)
• Sublimation Film (A4) (x5)
• Heat-resistant Gloves (x1 pair)
• Sublimation Badge (58 mm) (x3)
• Tweezers (x1)
• Heat-resistant Tape (x1)

Image: A visual representation of all components included in the HTVRONT Phone Case Heat Press Kit, neatly arranged with quantities.

4. الإعداد

اتبع هذه الخطوات لإعداد جهاز الضغط الحراري الخاص بك:

1. أفرغ: أزل جميع المكونات من العبوة بعناية. احتفظ بالعبوة للتخزين أو النقل لاحقًا.
2. الموقع: Place the heat press machine on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the machine.
3. توصيل الطاقة: قم بتوصيل سلك الطاقة بمأخذ كهربائي مؤرض. تأكد من مستوى الصوتtagيتوافق مع متطلبات الجهاز.
4. التفتيش الأولي: Before first use, inspect the machine for any visible damage. Do not operate if damage is present.

5. تعليمات التشغيل

5.1 Basic Operation (Quick Start Guide)

The HTVRONT heat press is designed for ease of use, even for beginners. Follow these general steps for heat transfer:

1. Power On and Set Parameters: Turn on the machine and use the control panel to set the desired temperature and time according to your material's requirements.
2. Preheat and Mount: Place the appropriate fixture (e.g., phone case fixture) into the device. Allow the machine to preheat. Once preheated, mount the item (e.g., phone case) onto the fixture.
3. Apply Sublimation Film: Carefully place the printed sublimation film with your design onto the item. Ensure proper alignment.
4. Begin Transfer: Close the lid to initiate the heat transfer process. The machine will automatically apply 3D vacuum pressure.
5. Completion and Peel: Once the transfer is complete, the machine will signal. Open the lid and carefully peel off the sublimation film while the item is still hot, using heat-resistant gloves.

Image: A visual guide illustrating the four key steps of the 6-minute heat press process, from setting parameters to peeling the film.

5.2 Material-Specific Settings (Quick Reference Chart)

Refer to the table below for recommended temperature and time settings for common sublimation materials:

Table: Quick Reference Chart for recommended heat press settings based on substrate material.

5.3 Universal Mold and Compatibility

The HTVRONT H17 features an adjustable phone case mold designed for compatibility with a wide range of iPhone models (iPhone 12 and above). This single fixture reduces the need for multiple molds.

Image: Illustration showing the heat press's universal adaptation for different iPhone models, highlighting its versatility.

The phone case fixture set includes a main fixture, lens pads, and filler blocks to ensure a snug fit for various phone sizes. Refer to the Model Compatibility Chart for specific recommendations:

Table: Model Compatibility Chart for iPhone models, indicating recommended Lens Pad and Filler Block combinations.

5.4 Smart Alignment Feature

The machine is equipped with phone-specific templates and pattern adjustment tools within its software. This feature ensures perfect alignment and complete coverage of your design, significantly improving the accuracy and efficiency of your creative process.

Image: A screenshot of the Smart Alignment software interface, demonstrating how users can adjust pattern size and position for perfect alignment on phone cases.

6. الصيانة

Proper maintenance ensures the longevity and optimal performance of your HTVRONT heat press machine:

• تنظيف: After each use, allow the machine to cool completely. Wipe down the heating plates and exterior with a soft, damp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
• العناية بالتركيبات: Clean the phone case and badge fixtures regularly to prevent residue buildup.
• تخزين: Store the machine in a dry, dust-free environment when not in use. Keep it in its original packaging if possible to protect it from damage.
• تقتيش: Periodically check the power cord for any signs of damage. If damaged, contact customer support for assistance.

7. استكشاف الأخطاء وإصلاحها

يتناول هذا القسم المشكلات الشائعة التي قد تواجهها. في حال وجود أي مشاكل غير مُدرجة هنا، يُرجى التواصل مع خدمة العملاء.

• الجهاز لا يعمل:
  • تأكد من توصيل سلك الطاقة بإحكام بكل من الجهاز ومأخذ كهربائي يعمل.
  • تأكد من أن مفتاح الطاقة في وضع التشغيل.
  • تأكد من أن المخرج الكهربائي يعمل عن طريق توصيل جهاز آخر.
• Uneven Heat Transfer/Faded Design:
  • Confirm that the temperature and time settings are correct for your specific material (refer to the Quick Reference Chart).
  • Ensure the sublimation film is properly aligned and securely taped to the item.
  • Check that the item is placed correctly and snugly within the fixture.
  • Ensure the item has a sublimation coating, as this machine is only suitable for such items.
• الآلة لا تسخن:
  • Verify the temperature setting is not at 0 or minimum.
  • Allow sufficient time for the machine to preheat to the set temperature.
  • إذا استمرت المشكلة ، فاتصل بدعم العملاء.
• الضوضاء المفرطة:
  • The machine operates quietly, typically below 65 dB. If unusual loud noises occur, discontinue use and contact support.

8. المواصفات

• رقم الموديل: RY-SJKJ-0651-US
• ماركة: هتفرونت
• مادة: معدن
• لون: أرجواني لافندر
• وزن السلعة: 15.22 رطل (حوالي 6.9 كجم)
• أبعاد المنتج: 1.2 بوصة طول × 1 بوصة عرض × 0.8 بوصة ارتفاع
• مستوى الضوضاء: <65 dB (Quiet Operation)
• الاستخدامات الموصى بها: Sublimation Phone Cases, Badges, Coasters, Keychains, Slates
• تكنولوجيا: Auto 3D Vacuum Heat Press
• التحكم في درجة الحرارة: Precise digital control
• التوافق: Universal mold for iPhone 12 and above models

9. الضمان والدعم

HTVRONT is committed to providing excellent customer service. If you have any questions or require assistance with your Phone Case Heat Press Machine, please do not hesitate to contact us.

• دعم العملاء: We provide 24/7 customer support to assist with any issues or inquiries.
• معلومات الضمان: For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact HTVRONT customer service directly.

Thank you for choosing HTVRONT. We hope you enjoy creating with your new heat press machine!