AirheadStorm 60V 2000W/3000W Brushless Motor Controller Instruction Manual

1. انتهى المنتجview

The AirheadStorm 60V 2000W/3000W Brushless Motor Controller is an essential component for electric scooters and vehicles, designed to provide efficient and reliable power management. This controller offers good compatibility and robust performance for enhancing your ride.

المميزات الرئيسية:

• التوافق: Designed for seamless compatibility with various electric scooters and vehicles.
• أداء قوي: Supports both 60V 2000W and 3000W configurations, ensuring robust power delivery.
• استبدال سهل: Ideal for replacing old or malfunctioning scooter parts to restore functionality.
• مادة متينة: Constructed from sturdy steel to withstand everyday use and maintain reliability.
• تصميم مضغوط: Dimensions are approximately 18x12x5cm for convenient integration.

2. معلومات السلامة

Always ensure the power is disconnected before performing any installation, maintenance, or troubleshooting. Incorrect wiring can lead to damage to the controller, motor, or battery, and may pose a safety risk. If you are unsure about any step, consult a qualified technician.

3. محتويات العبوة

• 1x AirheadStorm 60V 2000W/3000W Brushless Motor Controller

4. الإعداد والتثبيت

This section details the general wiring and connection process for the brushless motor controller. Refer to the provided video for a visual guide on connecting the controller to your electric scooter or vehicle.

الأسلاك أكثرview:

The controller features multiple color-coded wires and connectors for various functions, including motor phases, Hall sensors, throttle, brakes, and power supply. Ensure each connection is secure and matches the corresponding component on your vehicle.

This image displays the AirheadStorm brushless motor controller, motor, and throttle grips, along with the complete wiring harness and connection points. It provides a general overview of the components and their interconnections.

تفصيلية view of the various colored wires and connectors attached to the brushless motor controller, highlighting the main power terminals and signal wire bundles.

This image shows another angle of the controller's wiring, emphasizing the different types of connectors and their arrangement for various functions.

Video Guide: Connecting the Controller

5. تعليمات التشغيل

This section outlines the procedure for initiating the self-learning mode of the controller, which is crucial for optimal performance and compatibility with your motor.

Self-Learning Mode Procedure:

1. الخطوة 1: Turn the throttle handle fully to the end (maximum acceleration).
2. الخطوة 2: Open the electric door lock (turn on the scooter's power).
3. الخطوة 3: Pinch the brake lever six times within five seconds.
4. الخطوة 4: At this point, the controller will enter self-learning mode, and the tire will begin to reverse.
5. الخطوة 5: Twist the throttle handle once again. The tire should now turn in the forward direction.
6. الخطوة 6: Finally, close the electric door lock (turn off the scooter's power) to save the learned parameters and complete the self-learning process.

Video Guide: Self-Learning Mode

6. الصيانة

To ensure the longevity and optimal performance of your AirheadStorm brushless motor controller, follow these general maintenance guidelines:

• التفتيش الدوري: قم بفحص جميع توصيلات الأسلاك بشكل دوري للتأكد من إحكامها وعدم وجود علامات تآكل أو تلف.
• نظافة: Keep the controller unit clean and free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning.
• حماية البيئة: Avoid exposing the controller to extreme temperatures, direct sunlight for prolonged periods, or corrosive environments.
• خدمة احترافية: For any complex issues or internal repairs, seek assistance from a qualified service technician. Do not attempt to open the controller casing إلا إذا تم توجيه ذلك صراحةً.

7. استكشاف الأخطاء وإصلاحها

يُقدّم هذا القسم خطوات أساسية لحلّ المشكلات الشائعة. أما بالنسبة للمشكلات الأكثر تعقيداً، فيُرجى التواصل مع خدمة دعم العملاء.

• لا يوجد طاقة: Check all power connections, including the battery and ignition switch. Ensure the battery is charged.
• المحرك لا يستجيب: Verify throttle connections and ensure the self-learning mode has been successfully completed. Check motor phase and Hall sensor connections.
• عملية غير منتظمة: Re-perform the self-learning procedure. Inspect for loose or damaged wiring.
• ارتفاع درجة الحرارة: Ensure the controller has adequate ventilation and is not covered. Reduce continuous heavy load if possible.

8. المواصفات

9. الضمان والدعم

This product comes with a standard manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the contact information provided with your purchase or visit the official AirheadStorm website. Do not attempt to repair the unit yourself as this may void the warranty.