iMaihom 50W Motion Sensor Outdoor Light

مقدمة

Thank you for choosing the iMaihom 50W Motion Sensor Outdoor Light. This hardwired LED floodlight provides 5000 lumens of 6500K daylight white light, enhancing security and visibility for your outdoor spaces. Featuring advanced motion detection and a dusk-to-dawn function, this IP65 waterproof light is designed for reliable performance in various weather conditions. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

معلومات السلامة

• Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture.
• إذا لم تكن متأكدًا من عملية التثبيت، استشر كهربائيًا مؤهلًا.
• تأكد من أن جميع التوصيلات الكهربائية تتم وفقًا للقوانين واللوائح المحلية.
• Do not look directly into the LED light source when illuminated, as it may cause eye damage.
• This product is designed for outdoor use and is IP65 waterproof. However, ensure proper sealing during installation to maintain water resistance.
• Do not attempt to disassemble or modify the fixture, as this will void the warranty and may pose a safety risk.

محتويات الحزمة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• iMaihom 50W Motion Sensor Outdoor Light (1 unit)
• حامل تثبيت (وحدة واحدة)
• Wire Nuts (2 units)
• Screws and Expansion Rubber Plugs (various quantities for mounting)
• Gasket (1 unit)
• دليل التعليمات (هذا المستند)

الشكل 1: قائمة الأجزاء المضمنة

مميزات المنتج

• إضاءة ساطعة: Emits 5000 lumens of 6500K daylight white light for extensive coverage.
• كشف الحركة المتقدم: Features a 180-degree detection angle and a 19–72 ft range, with adjustable lighting duration from 1–10 minutes.
• Dusk to Dawn Function: Built-in light sensor automatically turns the floodlight ON at dusk and OFF at dawn.
• IP65 مقاوم للماء: Designed to withstand harsh weather conditions, ensuring year-round reliability.
• سهولة التركيب: Simple 3-step hardwired installation process.
• رؤوس قابلة للتعديل: Three light heads are 360° adjustable to direct light where needed.

الإعداد والتثبيت

Before installation, ensure the power supply is turned off at the circuit breaker to prevent electrical shock.

1. إزالة التركيبات القديمة (إن وجدت): Carefully disconnect and remove any existing light fixture from the junction box.
2. تثبيت كتيفة التركيب: Secure the provided mounting bracket to the junction box using the appropriate screws. Ensure it is firmly attached.
3. توصيل الأسلاك: Connect the wires from the new iMaihom light to the household wiring using the included wire nuts. Match colors: black to black (hot), white to white (neutral), and green to ground (bare copper). Wrap electrical tape around wire nuts for added security.
4. قم بتثبيت الضوء: Align the light fixture with the mounting bracket and secure it with the long machine screw provided. Ensure the gasket is properly seated between the fixture and the mounting surface to prevent water intrusion.
5. ضبط رؤوس الضوء: Loosen the Phillips screw on the main head to adjust its angle. The side LED heads can also be articulated to direct light as desired.

الشكل 2: خطوات التثبيت السلكي

Figure 3: Wall Mounted and Soffit Mounted Options

تعليمات التشغيل

The iMaihom motion sensor light offers multiple operating modes and adjustable settings located on the bottom of the motion sensor unit.

أقراص التحكم:

• TEST Mode (Left Dial): Used for initial setup and testing. In this mode, the light will turn on for 5 seconds when motion is detected, regardless of ambient light.
• TIME (Middle Dial): Adjusts the duration the light stays on after motion is detected, ranging from 10 seconds to 10 minutes.
• SENSITIVITY (Right Dial): Controls the detection range of the motion sensor (L: 19-26.2ft, M: 26.2-39.3ft, H: 39.3-72ft). Adjust this to prevent false triggers from small animals or distant objects.

أوضاع التشغيل:

• وضع مستشعر الحركة: The light activates only when motion is detected in dark conditions. The duration and sensitivity are set by the TIME and SENSITIVITY dials.
• Dusk to Dawn Mode (D2D): The built-in photocell sensor automatically turns the light ON when ambient light levels fall below a certain threshold (dusk) and OFF when light levels rise (dawn). Motion detection is typically overridden or integrated based on specific settings.

Figure 4: Control Dials for Settings

Figure 5: Dusk to Dawn Mode Operation

صيانة

• تنظيف: قم بتنظيف التركيبات باستخدام قطعة قماش ناعمة.amp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
• تقتيش: Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• العناية بالعدسة: حافظ على عدسة مستشعر الحركة نظيفة وخالية من العوائق (مثل الأوساخ والعناكب)webs) to ensure optimal performance.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

iMaihom products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official iMaihom webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة مطالبات الضمان.