AutoFull G7 Ergonomic Office Chair User Manual

1. المقدمة

This manual provides detailed instructions for the assembly, operation, and maintenance of your AutoFull G7 Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. انتهى المنتجview

The AutoFull G7 Ergonomic Office Chair is designed for optimal comfort and support during long periods of sitting. It features a 3-Zone Dynamic Lumbar system, 720° Dual-Axis Armrests, a T-Lock Support System with 4D Headrest, CloudTech Mesh for breathability, and a 140° Zero-Gravity Recline with a retractable footrest.

Figure 2.1: AutoFull G7 Ergonomic Office Chair (White variant).

3. تعليمات التجميع

For a visual guide, please refer to the official installation video below. It is recommended to have two people for assembly.

3.1. مكونات أكثرview

Ensure all components are present before beginning assembly. Refer to the accessories diagram in the installation video for a complete list.

• مسند الظهر
• وسادة المقعد
• Backrest Decorative Cover
• مسند الرأس
• مساند الذراعين (اليسار واليمين)
• Armrest Brackets
• رفع الغاز
• عجلات (x5)
• قاعدة 5 نجوم
• Chair Legs (x5)
• Screws (Type-1, Type-2, Type-3, Type-4)
• L-shaped Hexagon Wrench
• مفك البراغي

3.2. التجميع خطوة بخطوة

1. Assemble the 5-Star Base:
   • Insert each chair leg into the 5-star base.
   • Flip the 5-star base upside down.
   • Secure chair legs to the 5-star base using five Type-4 screws.
   • Insert each caster into the mounting hole of the chair legs.
   • Flip the 5-star base upright (casters touching the ground).
   • Align and insert the gas lift into the central hole of the 5-star base.
2. إرفاق مساند للذراعين:
   • Place the backrest flat on the floor.
   • Identify left/right armrests and align with backrest mounting holes.
   • Secure one armrest bracket to the backrest using two Type-1 screws.
   • Repeat the same process for the other armrest bracket.
   • Position armrests with side buttons facing outward.
   • Secure one armrest to the bracket with one Type-2 screw.
   • Repeat the same process for the other armrest.
3. Install Wire Controller:
   • Remove pre-installed wire controller screws located on the side of the seat cushion.
   • Align and position the wire controller over the mounting holes.
   • Secure the wire controller using the screws removed earlier.
4. Attach Backrest to Chassis:
   • Align the backrest with the chassis mounting holes.
   • Secure the backrest to the chassis using three Type-2 screws.
   • Insert the assembled 5-star base and gas lift into the chassis mounting holes.
   • Set the chair upright.
5. تركيب مسند الرأس:
   • Align the headrest with the top backrest mounting holes.
   • Secure the headrest to the backrest using two Type-3 screws.
6. Attach Back Armor:
   • Align the bottom buckle of the back armor with the corresponding buckle slot on the backrest.
   • Engage two mounting posts on the split part of the back armor into the upper backrest holes.

4. تعليمات التشغيل والتعديلات

Your AutoFull G7 chair offers multiple adjustment points for personalized comfort. Refer to the user guide video and instructions below.

4.1. تعديل ارتفاع المقعد

• To raise the seat height: Stand up from the chair and lift the control lever on the right side of the seat cushion. The seat will rise automatically.
• To lower the seat height: Sit on the chair and lift the control lever on the right side of the seat cushion. The seat will lower.
• حرر الذراع لقفل المقعد عند الارتفاع المطلوب.

4.2. تعديلات مسند الذراع

The 720° Dual-Axis Armrests offer extensive customization:

• ضبط الارتفاع: Flip the outer armrest paddle upward to lift, or press the armrest for height adjustment.
• Position Adjustment (Forward/Backward): Press and hold the armrest while pushing it forward or backward.
• ضبط الزاوية: Lift the front edge of the armrest surface.
• Rotation (360° Swivel): Rotate the armrest handle for 360° rotation. Rotate the armrest surface for 360° swivel.

Figure 4.2: Illustration of 720° Dual-Axis Rotating Armrests.

4.3. Headrest Adjustments

The 4D Dual-Axis Headrest provides comprehensive neck support:

• ضبط الارتفاع: Pull the headrest up/down.
• Front-Back Position Control: Pull the headrest forward for front-back position control.
• تعديل الميل: Rotate the primary axis at the headrest base.
• تعديل زاوية الدوران: Grip the upper part of the headrest mesh on both sides and move it up/down.

Figure 4.3: Illustration of 4D Dual-Axis Headrest Adjustment.

4.4. Lumbar Support Adjustments

The 3-Zone Dynamic Lumbar support adapts to your body:

• Vertical Positioning: Grip both sides of the lumbar support bracket and press to adjust its vertical position.
• Side Wing Tilt: The side cushioning offers 40° side wing tilt.
• Side Cushioning: The side cushioning provides 14° side cushioning that actively wraps around your lower back.
• Lumbar Rotation: The lumbar support allows for 12° rotation.
• Recline Tracking: Features stepless 0.8" recline tracking.
• Locking Lumbar Support: Lift the control lever to lock the lumbar support in place. When the control lever is in the lower position, the lumbar support will automatically adjust forward/backward to follow your waist.

Figure 4.4: Illustration of Auto Dynamic Lumbar Support.

4.5. تعديل عمق المقعد

• Push the adjustment lever forward to adjust the seat depth. The seat can be adjusted by 2 inches.

Figure 4.5: Illustration of 50mm Seat Depth Adjustment.

4.6. وظيفة الإمالة ومسند القدمين

• اتكأ: Pull the adjustment lever backward and lean back to activate the recline function. The chair reclines up to 140°.
• Lock Recline: Return the adjustment lever to its original position to lock the reclining angle.
• مسند للقدمين: Pull out the footrest and flip it outward to activate the footrest function. Retract the footrest when not in use.

5. الصيانة

To ensure the longevity and optimal performance of your AutoFull G7 chair, follow these maintenance guidelines:

• تنظيف: امسح بالإعلانamp cloth. Avoid harsh chemicals that may damage the mesh or frame.
• الفحوصات الدورية: افحص جميع البراغي والصواميل دوريًا للتأكد من إحكام ربطها. أعد ربطها إذا لزم الأمر.
• العناية بالشبكة: The CloudTech mesh is designed for durability and breathability. Avoid sharp objects that could tear the mesh.
• رفع الغاز: The TUV/SGS Class-4 gas lift is designed for long-term use. Do not attempt to disassemble or repair it yourself.

6. استكشاف الأخطاء وإصلاحها

If you encounter any issues with your AutoFull G7 chair, please refer to the following common solutions:

إذا لم تُحل هذه الحلول المشكلة، يُرجى الاتصال بدعم عملاء AutoFull.

7. المواصفات

Figure 7.1: Product Dimensions (in inches) and Recommended Height/Load Capacity.

Figure 7.2: AutoFull G7 Certifications.

8. الضمان والدعم

• ضمان: The AutoFull G7 chair comes with a 3-year warranty and a lifetime warranty on the frame.
• الإرجاعات: استمتع بإرجاع سهل خلال 30 يومًا.
• دعم العملاء: 24/7 support is available. For assistance, please visit the AutoFull Store on Amazon أو اتصل بخدمة العملاء مباشرة.

Figure 8.1: AutoFull After-Sales Service Information.