دليل المستخدم

1. المقدمة

Thank you for choosing the NJTY Voltage Tester & Digital Multimeter Bundle. This comprehensive kit provides essential tools for electrical testing, suitable for both DIY projects and professional applications. This manual provides detailed instructions for the safe and effective use of both the Digital Multimeter and the Non-Contact Voltagه الفاحص.

2. انتهى المنتجview

This bundle includes two primary devices:

• NJTY T3 Digital Multimeter: A compact device with a vibrant color screen for precise measurements of AC/DC voltage, continuity, resistance, and more.
• NJTY Non-Contact Voltagه الفاحص: A pen-style tester with voice alerts for identifying live and neutral wires, featuring non-contact voltage detection and breakpoint testing.

Figure 2.1: The NJTY Voltage Tester and Digital Multimeter Bundle.

3. الإعداد

3.1. NJTY T3 Digital Multimeter Setup

The NJTY T3 Digital Multimeter features a built-in rechargeable battery. Before first use, ensure the device is fully charged.

• الشحن: Connect the multimeter to a standard USB power source using the provided Type-C USB cable. The charging indicator will illuminate.
• يؤدي الاختبار: Insert the red test lead into the 'VΩmA' input jack and the black test lead into the 'COM' input jack. Ensure a secure connection.

Figure 3.1: The NJTY T3 Digital Multimeter connected for Type-C charging.

3.2. NJTY Non-Contact Voltage Tester Setup

المجلد غير التلامسيtage Tester is typically powered by internal batteries. Ensure they are properly installed or charged if rechargeable.

• تشغيل الطاقة: Press the power button to turn on the device. A self-test may occur.

4. تعليمات التشغيل

4.1. NJTY T3 Digital Multimeter Operation

The multimeter features an auto-function scan for ease of use.

• تشغيل/إيقاف التشغيل: Press and hold the power button to turn the multimeter on or off.
• Auto Function Scan: The multimeter automatically detects the type of measurement (AC/DC voltage, resistance, continuity) when the test leads are connected to a circuit.
• قياس حجم التيار المتردد / التيار المستمرtage: Connect the test leads across the circuit or component to measure voltage. The display will show the reading.
• اختبار الاستمرارية: In continuity mode, the multimeter will emit an audible beep if the resistance between the two test points is below approximately 50Ω, indicating a continuous circuit.
• قياس المقاومة: قم بتوصيل أسلاك الاختبار عبر المكون لقياس مقاومته.
• NCV (مجلد عدم الاتصالtagهـ) الكشف: Move the top of the multimeter near an AC voltage source. The device will indicate the presence of voltagودون اتصال مباشر.
• امسك المعلومات: اضغط على زر "التثبيت" لتجميد القراءة الحالية على الشاشة. اضغط مرة أخرى لتحريره.
• Flashlight/Backlight: The multimeter includes a built-in flashlight and backlight for improved visibility in dark environments.

Figure 4.1: Key features and display of the NJTY T3 Digital Multimeter.

الشكل 4.2: حجم بدون تلامسtage (NCV) detection with the Digital Multimeter.

Figure 4.3: The flashlight function of the Digital Multimeter for dark environments.

4.2. NJTY Non-Contact Voltagتشغيل جهاز الاختبار الإلكتروني

المجلدtage tester is designed for quick and safe voltagالكشف الإلكتروني.

• NCV (مجلد عدم الاتصالtagهـ) الكشف: Place the tip of the tester near a wire or outlet. The device will indicate the presence of AC voltage through visual and audible alerts.
• تعديل الحساسية: The tester offers dual sensitivity ranges (12-1000V and 48-1000V). Use the sensitivity button to switch between low and high sensitivity modes as needed for different applications.
• Live/Neutral Wire Identification: The tester uses voice alerts to audibly distinguish between live (hot) and neutral wires, enhancing safety and ease of identification.
• Break-Point Test: Use the tester to identify breaks in wires or cables. Move the tester along the wire; the absence of a signal indicates a break.
• Flashlight & Laser: The tester includes a built-in flashlight for illuminating work areas and a laser for precise alignment or pointing.

Figure 4.4: Sensitivity adjustment feature of the Voltagه الفاحص.

Figure 4.5: The Voltage Tester's voice alert system for identifying live wires.

Figure 4.6: Using the Voltage Tester for break-point detection in wires.

Figure 4.7: The Voltage Tester's integrated flashlight and laser for enhanced utility.

5. الصيانة

• تنظيف: Wipe the devices with a dry, clean cloth. Do not use abrasive cleaners or solvents.
• تخزين: Store the bundle in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care (Multimeter): Recharge the multimeter regularly, especially if it will not be used for an extended period, to maintain battery health.

6. استكشاف الأخطاء وإصلاحها

• الجهاز لا يعمل: Ensure the battery is charged (Multimeter) or properly installed (Voltage Tester).
• Inaccurate Readings (Multimeter): Check test lead connections. Ensure the correct measurement mode is selected (though auto-scan helps).
• No Detection (Voltage Tester): Ensure the device is powered on. Adjust sensitivity if necessary.
• عملية متقطعة: تحقق من وجود توصيلات فضفاضة أو بطارية منخفضة.

7. المواصفات

7.1. NJTY T3 Digital Multimeter

7.2. NJTY Non-Contact Voltagتستر ه

8. معلومات السلامة

WARNING: Always exercise extreme caution when working with electricity. Failure to follow safety guidelines can result in serious injury or death.

• Always test on a known live circuit before use to ensure the device is functioning correctly.
• Do not use the devices if they appear damaged or are not operating properly.
• Do not exceed the maximum input values specified for each device.
• ارتدِ معدات الوقاية الشخصية المناسبة، مثل القفازات العازلة ونظارات السلامة.
• Do not attempt to repair or modify the devices. Refer all servicing to qualified personnel.
• يحفظ بعيدًا عن متناول الأطفال.

9. الضمان والدعم

NJTY products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official NJTY webيرجى الاحتفاظ بإثبات الشراء الخاص بك للمطالبة بالضمان.