Aninerel ANJ-3600W-LV

Aninerel 3600W Solar Inverter Charger (Model ANJ-3600W-LV) User Manual

دليل شامل للتركيب والتشغيل والصيانة

1. المقدمة

This manual provides essential information for the safe and efficient operation of your Aninerel 3600W Solar Inverter Charger, Model ANJ-3600W-LV. This device is a pure sine wave hybrid inverter designed to convert DC 48V to AC 110V, featuring a built-in 80A MPPT solar charge controller. It supports various battery types, including battery-less operation, and offers flexible charging and output modes for diverse energy requirements. Please read this manual thoroughly before installation and use.

Aninerel 3600W Solar Inverter Charger with Wi-Fi module

Figure 1: Aninerel 3600W Solar Inverter Charger and Wi-Fi module.

2. معلومات السلامة

Please observe the following safety precautions to prevent injury and damage to the inverter or connected equipment.

  • يجب أن يتم التركيب بواسطة فنيين مؤهلين وفقًا لقوانين الكهرباء المحلية.
  • Ensure all power sources (PV, battery, AC grid) are disconnected before installation or maintenance.
  • لا تقم بفكّ العاكس. لا يحتوي على أي أجزاء قابلة للصيانة.
  • Avoid exposing the inverter to rain, snow, liquids, or excessive dust.
  • تأكد من التهوية المناسبة حول العاكس لمنع ارتفاع درجة الحرارة.
  • Connect the inverter to a proper ground.
  • Verify correct polarity when connecting batteries and PV arrays.
  • This inverter is designed for single-phase (120V) output and does not support parallel operation for increased power or split-phase configurations.
Inverter protection features including short circuit, overcurrent, backflow, overload, over-voltagه ، undervoltage, overheating, and overcharge protection.

الشكل 2: ميزات حماية العاكس.

3. مواصفات المنتج

The Aninerel 3600W Solar Inverter Charger offers a range of features for efficient power management:

  • تصميم الكل في واحد: Combines a 3.6KW pure sine wave inverter, a 40A battery charger, and an 80A MPPT solar charge controller.
  • مدخلات الطاقة الشمسية الكهروضوئية العالية: Supports a maximum PV open circuit voltagهـ 300 فولت تيار مستمر.
  • توافق البطارية: Compatible with 48V AGM/Sealed, Gel, Flooded, and Lithium batteries. Also supports battery-less operation.
  • أوضاع شحن مرنة: Offers Hybrid Charging, Utility Priority Charging, Solar Priority Charging, and Only Solar Charging.
  • أوضاع إخراج متعددة: Includes Utility Priority, Solar and Utility Hybrid, Solar Priority, and Inverter Priority.
  • Time-Slot Function: Allows setting specific charging and discharging periods to optimize energy usage based on local tariffs.
  • واجهات الاتصال: Supports CAN, USB, and RS485 for communication with compatible batteries and monitoring systems.
  • الحماية الشاملة: Features PV input over-voltage/current protection, AC input over-voltagالحماية الإلكترونية، حجم البطارية الزائدtage protection, and overload protection.
Diagram showing inverter features: Battery Compatibility, Grid Connection, Flexible Settings, Wireless Communication.

Figure 3: Key Features of the Aninerel Hybrid Solar Inverter Charger.

4. مكونات المنتج والمنافذ

Familiarize yourself with the inverter's components and connection ports before installation.

Diagram labeling the ports and components of the Aninerel solar inverter, including indicator light, LCD screen, touch keys, AC input/output, PV input, battery terminals, communication ports (USB, RS485, CAN, WiFi), and cooling fan.

Figure 4: Inverter Front and Side Panel Overview with Labeled Ports.

  1. مؤشر الضوء
  2. شاشة LCD
  3. Touch Keys (ESC, UP, DOWN, ENTER)
  4. حامي الزائد
  5. Grounding Screw Hold
  6. منفذ إخراج التيار المتردد
  7. Wi-Fi Port (Optional)
  8. منفذ إدخال التيار المتردد
  9. RS485-2 Communication Port
  10. RS485-1 Communication Port
  11. منفذ اتصال USB
  12. مروحة التبريد
  13. ON / OFF الروك التبديل
  14. ميناء الاتصال الجاف
  15. Current Sharing Port (for parallel module only, not supported by this model)
  16. Parallel Communication Port (for parallel module only, not supported by this model)
  17. منفذ البطارية
  18. ميناء الطاقة الشمسية

ملحوظة: This specific model (ANJ-3600W-LV) does not support parallel operation. Therefore, ports 15 and 16 are not applicable for this unit.

5. الإعداد والتثبيت

يُعد التركيب الصحيح أمراً بالغ الأهمية لأداء العاكس وسلامته.

5.1 فك العبوة والتفتيش

  • Open the package and verify all accessories are present as shown in Figure 5.
  • Inspect the inverter for any physical damage. Contact your dealer immediately if any damage is found.
Image showing the Aninerel 3600W Solar Inverter Charger and its accessories: instruction manual, installation toolkit, anti-reverse current CT, and WiFi module.

Figure 5: Product Accessories.

5.2 تركيب العاكس

  • Choose a suitable location: indoors, protected from direct sunlight, rain, and dust.
  • Ensure adequate clearance around the inverter for proper airflow (at least 20 cm on all sides).
  • قم بتركيب العاكس عموديًا على جدار متين باستخدام أدوات التثبيت المناسبة.

5.3 توصيلات الأسلاك

Follow the wiring diagram carefully. All wiring should be done by a qualified electrician.

Detailed wiring diagram for the Aninerel 3600W Solar Inverter Charger, showing connections for solar panels, batteries, AC input from grid/generator, and AC output to household loads. Includes recommended cable sizes and breaker ratings.

Figure 6: Typical Wiring Diagram.

  • توصيل البطارية: Connect the 48V battery bank to the BAT+ and BAT- terminals. Ensure correct polarity. Recommended cable: 2 AWG/25 mm². Recommended fuse: 150A.
  • اتصال مجموعة الخلايا الكهروضوئية: Connect solar panels to the PV+ and PV- terminals. Max PV input power: 4000W. Max PV open circuit voltage: 300Vdc. MPPT voltage range: 80Vdc-300Vdc. Recommended cable: 10 AWG/6 mm². Connect solar modules in series.
  • اتصال إدخال التيار المتردد: Connect the AC grid or generator to the AC Input port. Max AC input voltage: 300VAC. Max AC charging current: 80A. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
  • اتصال مخرج التيار المتردد: Connect your AC loads to the AC Output port. AC output power: 3600W. AC output voltage: 110V / 120V. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
  • التأريض: Connect the grounding screw to a reliable earth ground.

مهم: Double-check all connections before powering on the inverter. Incorrect wiring can cause severe damage.

6. تعليمات التشغيل

Once installed, you can configure and operate your inverter using the LCD display and touch keys.

6.1 التشغيل الأولي

  1. تأكد من أن جميع الأسلاك مثبتة بشكل آمن وصحيح.
  2. قم بتشغيل قاطع الدائرة الكهربائية الخاص بالبطارية.
  3. Turn on the PV array breaker (if connected).
  4. قم بتشغيل قاطع دائرة التيار المتردد (إذا كان موصولاً).
  5. Flip the ON/OFF rocker switch on the inverter to the "ON" position.
  6. The LCD screen will light up, and the inverter will perform a self-test.

6.2 شاشة LCD والإعدادات

Use the ESC, UP, DOWN, and ENTER buttons to navigate the LCD menu and adjust settings. Refer to the detailed manual for specific menu options.

6.3 Charging Priority Modes

These settings determine how your battery bank is charged from available power sources.

Diagram illustrating three charging priority modes: Solar First AC Input Next, Solar and AC Input Simultaneously, and Solar Only.

Figure 7: Charger Source Priority Options.

  • Solar First AC Input Next: Solar panels prioritize charging the battery. AC input charges only if solar power is insufficient.
  • Solar and AC Input Simultaneously: Both solar energy and utility power charge the battery bank at the same time.
  • الطاقة الشمسية فقط: Solar energy is the exclusive charging source, regardless of AC input availability.

6.4 Output Source Priority Modes

These settings determine which power source the inverter uses to supply connected appliances.

Diagram illustrating three output source priority modes: Solar First, AC First, and Solar and Battery First (DC Priority).

Figure 8: Output Source Priority Options.

  • الطاقة الشمسية أولاً: Prioritizes powering appliances from solar. If solar is insufficient, AC input will supplement.
  • التيار المتردد أولاً: Redirects AC input to power all appliances and uses solar and batteries only when AC input is unavailable.
  • DC Priority (Solar and Battery First): Prioritizes solar power. If solar is insufficient, the battery bank supplies power. AC input powers only when battery voltage drops to a programmable value.

6.5 تكوين نوع البطارية

The inverter is compatible with various 48V battery types. Ensure the correct battery type is selected in the settings for optimal charging and discharge management.

Image showing the inverter and a battery, with icons for different battery types: GEL, FLD (Flooded), LI (Lithium), SLD (Sealed), and USE (User-defined).

Figure 9: Supported Battery Types.

  • AGM/Sealed
  • جل
  • غمرت المياه
  • الليثيوم
  • User Mode (for custom battery parameters)

The inverter also supports battery-free operation. For lithium batteries, the shore power and photovoltaic can activate dormant lithium batteries.

7. Wi-Fi Monitoring

The inverter comes with an optional Wi-Fi module for remote monitoring.

Image showing the inverter connected to a Wi-Fi module, with a person monitoring the system on a smartphone app.

Figure 10: Wi-Fi Monitoring Setup.

  • Connect the Wi-Fi module to the designated Wi-Fi port on the inverter.
  • Download the compatible monitoring application to your smartphone or tablet.
  • Follow the app's instructions to register your device and connect it to your local Wi-Fi network.
  • Once connected, you can monitor the inverter's status, energy production, and consumption in real-time from anywhere.

ملحوظة: Refer to the Wi-Fi module's separate instruction guide for detailed setup procedures, as app names and connection steps may vary.

8. الصيانة

تضمن الصيانة المنتظمة طول عمر وأداء العاكس الخاص بك على النحو الأمثل.

  • تنظيف: Periodically clean the inverter's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
  • الاتصالات: قم بفحص جميع التوصيلات الكهربائية سنوياً للتأكد من إحكامها وخلوها من علامات التآكل.
  • بيئة: تأكد من أن بيئة التشغيل تظل ضمن نطاقات درجة الحرارة والرطوبة المحددة.
  • فحص البطارية: في حالة استخدام بطاريات الرصاص الحمضية، تحقق من مستويات الإلكتروليت وظروف الأطراف وفقًا لإرشادات الشركة المصنعة للبطارية.

افصل دائمًا جميع مصادر الطاقة قبل إجراء أي صيانة.

9. استكشاف الأخطاء وإصلاحها

يُقدّم هذا القسم حلولاً للمشاكل الشائعة. أما بالنسبة للمشاكل غير المذكورة هنا، فيُرجى التواصل مع خدمة العملاء.

مشكلةالسبب المحتملحل
لا يعمل العاكس.لا يوجد اتصال بالبطارية، مستوى شحن البطارية منخفضtage, ON/OFF switch off, blown fuse/breaker.تحقق من توصيلات البطارية ومستوى الصوتtage. Ensure ON/OFF switch is on. Check and replace fuses/reset breakers.
لا يوجد مخرج التيار المتردد.Overload, short circuit, low battery, inverter fault.Reduce load. Check for short circuits in wiring. Check battery voltage. Consult LCD error codes.
PV not charging batteries.No sunlight, PV array disconnected, incorrect PV voltage, MPPT controller fault.Check sunlight conditions. Verify PV connections and voltage. Ensure PV input is within operating range.
Wi-Fi module not connecting.Incorrect app, poor Wi-Fi signal, incorrect setup steps.Ensure correct app is used. Check Wi-Fi signal strength. Re-follow Wi-Fi module setup instructions carefully.

10. المواصفات

Key technical specifications for the Aninerel 3600W Solar Inverter Charger (Model ANJ-3600W-LV):

  • اسم الموديل: ANJ-3600W-LV
  • طاقة الإخراج المقدرة: 3600 واط
  • أقصى قوة الذروة: 7200 فولت أمبير
  • حجم الإدخالtagه (دس): 48 فولت
  • حجم الإخراجtag(ج): 110V / 120V (Single Phase)
  • الأعلى. PV Open Circuit Voltage: 300 Vdc
  • حجم التشغيل الكهروضوئيةtagالنطاق الإلكتروني: 80 - 300 Vdc
  • MPPT المجلدtagالنطاق الإلكتروني: 90 - 260 Vdc
  • Max. AC Charging Current: 80 أمبير
  • حجم البطاريةtagالنطاق الإلكتروني: 40 - 60 Vdc
  • وزن السلعة: 19.36 رطل
  • أبعاد الحزمة: 19.57 × 14.17 × 7.09 بوصة
  • الشركة المصنعة: Shenzhen Anenji Energy Technology Co.,Ltd

11. الضمان والدعم

For warranty information, technical assistance, or customer support, please contact Aninerel directly.

Aninerel customer support contact information: email anenji168@outlook.com and phone +86 188 0375 9233, available PDT: 9AM - 6PM.

Figure 11: Aninerel Customer Support Contact Information.

  • بريد إلكتروني: anenji168@outlook.com
  • هاتف: +86 188 0375 9233
  • Support Hours (PDT): 9 AM - 6 PM

Please have your model number (ANJ-3600W-LV) and purchase date ready when contacting support.

© 2025 Aninerel. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.