Dapper Supply DP-RAFS1205

Dapper Supply DP-RAFS1205 Ride-On Commercial Floor Scrubber Machine User Manual

Model: DP-RAFS1205 | Brand: Dapper Supply

1. المقدمة

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Dapper Supply DP-RAFS1205 Battery Powered Ride-On Commercial Floor Scrubber Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

1.1. معلومات السلامة

  • Always wear appropriate personal protective equipment (PPE) during operation and maintenance.
  • تأكد من إيقاف تشغيل الجهاز وفصله عن مصدر الطاقة قبل إجراء أي صيانة أو تعديلات.
  • Operate the machine only on surfaces designed for its use.
  • Do not operate the machine in hazardous environments or near flammable materials.
  • أبعد اليدين والقدمين والملابس الفضفاضة عن الأجزاء المتحركة.
  • Familiarize yourself with all controls and emergency stop procedures.

2. انتهى المنتجview

The Dapper Supply DP-RAFS1205 is a battery-powered ride-on commercial floor scrubber designed for efficient cleaning of large floor areas. It features a 22-inch brush width, a 31.5-inch squeegee width, and a dual-tank system for clean and recovery water.

Dapper Supply DP-RAFS1205 Ride-On Floor Scrubber, side view

الشكل 2.1: الجانب view of the Dapper Supply DP-RAFS1205 Ride-On Commercial Floor Scrubber Machine.

2.1. المكونات الرئيسية

  • المقود: للتحكم في الاتجاه.
  • Operator Seat: Provides comfortable seating for the user.
  • لوحة التحكم: Contains power switch, brush controls, solution flow, and battery indicator.
  • خزان الحل: Holds clean water and cleaning solution (18.5-gallon capacity).
  • خزان الاسترداد: Collects dirty water (19.8-gallon capacity).
  • فرشاة تنظيف: 22-inch diameter brush for scrubbing floors.
  • تجميع الممسحة: 31.5-inch wide squeegee for water and debris collection.
  • Front & Back Lights: For improved visibility in dimly lit areas.
  • إنذار النسخ الاحتياطي: Enhances safety during reverse operation.
Close-up of the control panel area with key and brush

الشكل 2.2: الصورة عن قرب view of the control panel area, showing the key ignition and brush control.

3. الإعداد

3.1. التفريغ والتجمع

  1. أخرج الجهاز من عبوته بعناية. افحصه بحثًا عن أي تلف ناتج عن الشحن.
  2. تأكد من وجود جميع المكونات المدرجة في قائمة التعبئة.
  3. Attach any unattached components, such as the squeegee assembly, following the diagrams provided in the separate assembly guide (if applicable).

3.2. الشحن الأولي للبطارية

Before first use, fully charge the machine's battery. The battery system requires 7-8 hours for a full charge.

  1. حدد منفذ الشحن الموجود على الجهاز.
  2. Connect the provided charger to the machine and then to a standard 110V AC power outlet.
  3. Monitor the charging indicator lights. Disconnect the charger once charging is complete.

3.3. ملء خزان المحلول

  1. Open the lid of the clean water (solution) tank.
  2. Fill the tank with clean water and an appropriate, manufacturer-approved cleaning solution according to the solution manufacturer's instructions. Do not overfill.
  3. Securely close the tank lid.

4. تعليمات التشغيل

4.1. قائمة التحقق قبل العملية

  • تحقق من مستوى شحن البطارية.
  • تأكد من أن خزان المحلول ممتلئ وأن خزان الاسترداد فارغ.
  • Verify brush and squeegee are properly installed and free of obstructions.
  • Clear the area to be cleaned of any large debris or obstacles.

4.2. بدء تشغيل الماكينة

  1. Sit comfortably in the operator's seat.
  2. أدخل المفتاح في مكان التشغيل وقم بتدويره إلى وضع "التشغيل".
  3. Engage the main power switch on the control panel.

4.3. إجراءات التنظيف

  1. Lower the scrub brush using the brush control lever/button.
  2. Lower the squeegee assembly using its respective lever/button.
  3. Activate the solution flow.
  4. Begin driving the machine at a consistent, moderate speed. Overlapping passes slightly will ensure thorough cleaning.
  5. The machine will scrub the floor, dispense solution, and then recover the dirty water through the squeegee into the recovery tank.
  6. Utilize the front and back lights for enhanced visibility in low-light conditions. The backup alarm will sound when reversing.
Operator using the Dapper Supply Ride-On Floor Scrubber

Figure 4.1: An operator demonstrating the use of the Dapper Supply Ride-On Floor Scrubber.

4.4. بعد العملية

  1. Raise the scrub brush and squeegee.
  2. Turn off the solution flow.
  3. Turn off the main power switch and remove the key.
  4. قم بتفريغ خزان الاسترداد وشطفه.
  5. Rinse the solution tank if using cleaning chemicals.
  6. Clean the squeegee blades and brush.

5. الصيانة

تضمن الصيانة المنتظمة الأداء الأمثل وتطيل عمر جهازك.

5.1. الصيانة اليومية

  • Empty and rinse both solution and recovery tanks thoroughly.
  • Clean the squeegee blades and check for wear. Replace if damaged.
  • Inspect the scrub brush for debris and wear. Remove any tangled materials.
  • امسح الجزء الخارجي من الجهاز.
  • Check battery charge and recharge as needed.
Close-up of the squeegee assembly and wheel

الشكل 5.1: مفصل view of the squeegee assembly, showing the blade and adjustment knob.

5.2. الصيانة الأسبوعية

  • افحص جميع الخراطيم والوصلات بحثًا عن أي تسرب أو تلف.
  • Check the condition of the wheels and casters.
  • Clean the vacuum filter (if applicable).
Close-up of the scrub brush underneath the machine

الشكل 5.2: الجانب السفلي view showing the scrub brush, which should be regularly inspected and cleaned.

5.3. العناية بالبطارية

  • احرص دائمًا على إعادة شحن البطارية بعد كل استخدام، حتى لو لم تكن فارغة تمامًا.
  • تجنب تفريغ البطارية بالكامل، لأن ذلك قد يقلل من عمرها الافتراضي.
  • Store the machine in a cool, dry place when not in use, ensuring the battery is charged.

6. استكشاف الأخطاء وإصلاحها

يقدم هذا القسم حلولاً لمشاكل تشغيلية شائعة. في حال وجود أي مشاكل غير مُدرجة هنا، يُرجى التواصل مع خدمة العملاء.

مشكلةالسبب المحتملحل
الآلة لا تبدأBattery discharged; Key not in 'ON' position; Main power switch off.Charge battery; Turn key to 'ON'; Engage main power switch.
أداء الغسل ضعيفWorn brush; Incorrect brush type; Insufficient solution flow.Replace brush; Use correct brush for floor type; Check solution tank level and flow settings.
Water not recovering properlyWorn or damaged squeegee blades; Recovery tank full; Clogged vacuum hose.Replace squeegee blades; Empty recovery tank; Clear vacuum hose.
Machine loses power quicklyالبطارية غير مشحونة بالكامل؛ بطارية قديمة.Ensure full charge before use; Consider battery replacement if performance continues to degrade.

7. المواصفات

Technical specifications for the Dapper Supply DP-RAFS1205.

ميزةمواصفة
رقم الموديلDP-RAFS1205
مصدر الطاقةتعمل بالبطارية
عرض التنظيف22 بوصة
عرض الممسحة31.5 بوصة
سعة خزان الحل18.5 جالون
سعة خزان الاسترداد19.8 جالون
وقت الاستخدام المستمر3-4 ساعات
وقت الشحن7-8 ساعات
كفاءة التنظيفUp to 48,400 sq. ft/hour
سرعة الفرشاة200 دورة في الدقيقة
مستوى ضوضاء التشغيل60 ديسيبل
وزن العنصر242 رطل
أبعاد المنتج (الطول × العرض × الارتفاع)49 × 24 × 43 بوصة
المجلدtage110 فولت (تيار متردد)
مادةالألومنيوم
المكونات المضمنةHard Brush for Hard Floors

8. الضمان والدعم

8.1. ضمان الشركة المصنعة

The Dapper Supply DP-RAFS1205 Ride-On Commercial Floor Scrubber Machine is covered by a ضمان الشركة المصنعة لمدة عامين. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage due to misuse, neglect, or unauthorized modifications.

8.2. دعم العملاء

For technical assistance, parts, or warranty inquiries, please contact Dapper Supply customer support. You can find contact information on the official Dapper Supply webالموقع أو من خلال منصة الشراء الخاصة بك.

For more information about Dapper Supply products and support, visit the official Dapper Supply Store.

© 2025 Dapper Supply. All rights reserved.