Dual Wireless Lavalier Lapel Microphone System

1. تعليمات السلامة

• Read all instructions carefully before operating the system.
• احتفظ بهذا الدليل للرجوع إليه في المستقبل.
• لا تعرض الجهاز للمطر أو الرطوبة لتجنب الحريق أو الصدمة الكهربائية.
• لا تفتح الصندوقasinز. إحالة جميع أعمال الصيانة إلى موظفين مؤهلين.
• Ensure proper ventilation around the receiver.
• استخدم محول الطاقة المحدد فقط.
• Avoid placing the system near heat sources or in direct sunlight.
• تخلص من البطاريات بطريقة مسؤولة وفقًا للوائح المحلية.

2. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• One (1) Two-channel UHF Receiver
• Two (2) Lavalier Microphones with Bodypack Transmitters
• One (1) 1/4" Audio Cable
• One (1) AC-DC Power Adapter

3. انتهى المنتجview

المتلقي

The receiver unit processes the wireless audio signals from the transmitters. It features true diversity reception with two antennas per channel for enhanced signal stability and range up to 490 feet. The multi-functional LCD indicator displays RF and audio signal status for both channels, current volume levels, and battery life of the transmitters. It provides two individual XLR outputs and one 1/4" mixed output for connection to an ampمُضخّم أو خلاط.

Bodypack Transmitters & Lavalier Microphones

Each bodypack transmitter connects to a lavalier microphone, capturing audio. The lavalier microphones feature an omnidirectional polar pattern. Each channel offers 100 preset UHF frequencies. The transmitters are equipped with an RF power level switchable between Low (LO) and High (HI) settings to optimize performance for various operating environments. Battery compartments are located on the bodypack units.

4. الإعداد

4.1 الإعداد الأولي

1. تحديد موقع المُستقبِل: Place the receiver in a central location, away from large metal objects and other wireless devices, to ensure optimal signal reception. Extend the antennas vertically.
2. توصيل الطاقة: Connect the AC-DC power adapter to the receiver's power input and plug it into a suitable power outlet.
3. توصيل إخراج الصوت: Connect the receiver's XLR or 1/4" mixed output to your amplifier, mixer, or sound system using the provided 1/4" audio cable or appropriate XLR cables (not included).

4.2 تحضير جهاز الإرسال

1. تركيب البطاريات: Open the battery compartment on each bodypack transmitter and insert fresh batteries, observing correct polarity.
2. توصيل ميكروفونات لافالير: Plug the lavalier microphones into the input jacks on their respective bodypack transmitters.

4.3 Automatic Synchronization (IR Sync)

1. تشغيل الطاقة: Turn on the receiver and then each bodypack transmitter.
2. بدء المسح: On the receiver, press the 'SCAN' button (or equivalent) to initiate an automatic frequency scan. The receiver will search for clear frequencies.
3. Perform IR Sync: Once a clear frequency is found and displayed on the receiver's LCD, align the IR sensor on the bodypack transmitter with the IR window on the receiver. Press the 'SYNC' button (or equivalent) on the receiver. The transmitter and receiver will automatically synchronize to the same frequency. Repeat for the second transmitter.

5. تعليمات التشغيل

5.1 تشغيل/إيقاف التشغيل

• To power on the receiver, press the power button.
• To power on each bodypack transmitter, press and hold its power button.
• لإيقاف التشغيل، اعكس العملية.

5.2 التحكم في مستوى الصوت

Adjust the output volume for each channel directly on the receiver using the dedicated volume knobs. Monitor the audio levels on the receiver's LCD to prevent clipping.

5.3 ضبط التردد

While the automatic IR sync is recommended, frequencies can be manually adjusted if necessary. Consult the receiver's menu for options to select from the 100 preset frequencies per channel. After manual selection, re-sync the transmitter.

5.4 وظيفة كتم الصوت

Each bodypack transmitter includes a mute function. Press the mute button on the transmitter to temporarily silence the microphone output without powering off the unit. The receiver's LCD will indicate the muted status.

5.5 RF Power Level Switch

The bodypack transmitters allow switching between Low (LO) and High (HI) RF power output. Use LO for shorter distances or when multiple systems are in use to minimize interference. Use HI for maximum range. This setting is typically found within the transmitter's battery compartment or menu.

5.6 وظيفة المجموعة

The Group Function allows automatic addressing for up to 8 systems simultaneously in the same location. Refer to the receiver's menu for initiating this function. This feature also facilitates switching between different types of transmitters (e.g., handheld and bodypack) if compatible units are used.

6. استكشاف الأخطاء وإصلاحها

7. المواصفات

8. الضمان والدعم

This product is covered by a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims. For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Specific warranty terms and conditions may vary by region and retailer.