TP-Link Archer BE400 WiFi 7 Router Instruction Manual

1. المقدمة

The TP-Link Archer BE400 is a high-performance WiFi 7 router designed to deliver exceptional speed and stability for your home network. Featuring BE6500 dual-band Wi-Fi, it supports speeds of up to 5765 Mbps on the 5GHz band and 688 Mbps on the 2.4GHz band. This router is equipped with advanced Wi-Fi 7 technologies such as Multi-Link Operation (MLO), 4K-QAM, and Multi-RU, ensuring efficient data transmission and reduced latency for demanding applications like 4K/8K streaming, online gaming, and VR/AR experiences.

The Archer BE400 also includes versatile connectivity options with one 2.5Gbps WAN port, one 2.5Gbps LAN port, and three Gigabit LAN ports. It supports EasyMesh for seamless whole-home Wi-Fi coverage and integrates HomeShield security features for enhanced network protection, parental controls, and Quality of Service (QoS). With support for VPN server/client and WPA3 encryption, the Archer BE400 provides a secure and robust networking solution.

Image: The Archer BE400 router shown in both vertical standing and wall-mounted orientations, demonstrating flexible installation options.

2. محتويات العبوة

تأكد من أن الحزمة الخاصة بك تحتوي على العناصر التالية:

• جهاز توجيه TP-Link Archer BE400 WiFi 7
• محول الطاقة
• كابل إيثرنت
• دليل التثبيت السريع

3. جسديا أكثرview

Familiarize yourself with the ports and indicators on your Archer BE400 router.

3.1. مؤشرات اللوحة الأمامية

The front panel features LED indicators that display the router's status, including power, internet connection, and Wi-Fi activity.

3.2. منافذ وأزرار اللوحة الخلفية

• منفذ الطاقة: يتصل بمحول الطاقة المقدم.
• زر التشغيل/الإيقاف: يقوم بتشغيل أو إيقاف تشغيل جهاز التوجيه.
• منفذ WAN بسرعة 2.5 جيجابت في الثانية: يتصل بالمودم الخاص بك للوصول إلى الإنترنت.
• منفذ شبكة محلية بسرعة 2.5 جيجابت في الثانية: Connects to a wired device for high-speed local network access.
• منافذ LAN Gigabit (x3): يتصل بالأجهزة السلكية مثل أجهزة الكمبيوتر أو وحدات التحكم في الألعاب أو أجهزة التلفزيون الذكية.
• زر إعادة الضبط: اضغط مع الاستمرار لعدة ثوانٍ لاستعادة إعدادات المصنع الافتراضية.

Image: The rear panel of the Archer BE400, highlighting the 2.5Gbps WAN and LAN ports, along with three Gigabit LAN ports.

4. تعليمات الإعداد

Follow these steps to set up your Archer BE400 router:

1. توصيل الأجهزة:
   • Power off your modem and remove its backup battery (if applicable).
   • Connect the modem to the router's 2.5Gbps WAN port using an Ethernet cable.
   • Power on the modem, then wait for about 2 minutes for it to start up.
   • Connect the power adapter to the router and plug it into a power outlet. Power on the router.
2. تنزيل تطبيق Tether:

   Download the TP-Link Tether app on your smartphone or tablet. You can scan the QR code below or search for "TP-Link Tether" in your app store.

   

   Image: A smartphone showing the TP-Link Tether app interface for router setup, positioned next to the Archer BE400 router.

   For the Tether app, visit: https://www.tp-link.com/app/qrcode/?app=tether

3. Configure via Tether App:

   Open the Tether app and follow the on-screen instructions to complete the router setup, including creating a TP-Link ID, setting up your Wi-Fi network name (SSID) and password, and configuring internet settings.

5. أوضاع التشغيل

The Archer BE400 supports two main operating modes:

5.1. Router Mode (Default)

In Router Mode, the device acts as your primary internet gateway, sharing your internet connection with all connected devices via Wi-Fi and Ethernet. This is the default mode and is suitable for most home networks.

5.2. Access Point Mode (Bridge Mode)

In Access Point Mode, the device extends your existing wired network to wireless devices. It connects to an existing router via an Ethernet cable and broadcasts a Wi-Fi signal, essentially turning your wired network into a wireless one. This mode is useful for expanding Wi-Fi coverage in a larger home or office.

6. الميزات المتقدمة

6.1. تقنية واي فاي 7

The Archer BE400 leverages the latest Wi-Fi 7 (802.11be) standard, offering significant improvements in speed, capacity, and efficiency:

• عملية متعددة الروابط (MLO): MLO allows devices to send and receive data across different frequency bands (e.g., 2.4GHz and 5GHz) simultaneously, enhancing throughput and reducing latency.
• 4K-QAM: This advanced modulation scheme packs more data into each signal, increasing raw data rates by up to 20% compared to 1024-QAM in Wi-Fi 6/6E.
• Multi-RU: Enables more flexible allocation of spectrum resources, allowing multiple users to transmit data simultaneously with greater efficiency.

Image: A table comparing Wi-Fi 7 features such as MLO, 6GHz+320MHz channels, 4K-QAM, and Multi-RU with previous Wi-Fi standards (Wi-Fi 6E, Wi-Fi 5).

Image: A visual representation of Multi-Link Operation (MLO), showing the Archer BE400 router communicating with a Wi-Fi 7 device over both 5GHz and 2.4GHz bands simultaneously for improved performance.

6.2. 2.5Gbps Wired Connections

The Archer BE400 is equipped with a 2.5Gbps WAN port and a 2.5Gbps LAN port, allowing you to take full advantage of high-speed internet connections and connect high-bandwidth devices directly to your network for optimal performance.

الصورة: تفصيلية view of the Archer BE400's rear panel, emphasizing the 2.5Gbps WAN and LAN ports for next-generation high-speed wired connectivity.

6.3. توافق EasyMesh

The Archer BE400 is EasyMesh compatible, allowing you to create a seamless whole-home mesh Wi-Fi network by adding other EasyMesh-compatible routers or range extenders. This eliminates Wi-Fi dead zones and provides a unified network name for smooth roaming throughout your home.

Image: A diagram illustrating an EasyMesh network, showing how the Archer BE400 router works with another EasyMesh device to provide seamless Wi-Fi coverage and smart roaming.

6.4. نظام هوم شيلد للأمن

TP-Link HomeShield provides a suite of security features to protect your home network and connected devices:

• ماسح الشبكة: Detects potential threats in real-time.
• الرقابة الأبوية: Manage online time and block inappropriate content for family members.
• جودة الخدمة (QoS): Prioritize bandwidth for specific devices or applications to ensure smooth performance.

صورة: لقطات شاشة توضحasing the HomeShield features, including network scanning for threats, parental control settings, and QoS configuration options.

6.5. دعم الشبكة الافتراضية الخاصة (VPN)

The Archer BE400 supports both VPN server and VPN client functionalities, allowing you to establish secure connections:

• خادم VPN: Access your home network securely from outside.
• عميل VPN: قم بتوصيل شبكتك بالكامل بخدمة VPN، لحماية جميع الأجهزة المتصلة.

Image: A diagram illustrating the VPN capabilities of the Archer BE400, showing how it can act as both a VPN server and a VPN client to secure network traffic.

7. الصيانة

7.1. تحديثات البرامج الثابتة

Regularly update your router's firmware to ensure optimal performance, security, and access to new features. Firmware updates can typically be performed via the TP-Link Tether app or through the router's web واجهة الإدارة.

7.2. إعادة ضبط المصنع

If you encounter persistent issues or wish to clear all configurations, you can perform a factory reset. With the router powered on, press and hold the Reset button on the rear panel for approximately 5-10 seconds until the LEDs flash. The router will then restart with its factory default settings.

8. استكشاف الأخطاء وإصلاحها

فيما يلي حلول للمشاكل الشائعة التي قد تواجهها:

• لا يوجد اتصال بالإنترنت:
  • تأكد من أن المودم الخاص بك يعمل بشكل صحيح.
  • تأكد من توصيل جميع الكابلات بشكل آمن بجهاز التوجيه والمودم.
  • أعد تشغيل المودم وجهاز التوجيه الخاص بك.
  • Verify your internet settings in the Tether app or web واجهة.
• سرعة الواي فاي بطيئة:
  • Ensure your devices are connected to the appropriate Wi-Fi band (5GHz for higher speeds, 2.4GHz for wider coverage).
  • Reduce interference by placing the router away from other electronic devices.
  • Consider using EasyMesh to extend coverage if your home is large.
  • تحقق من وجود تحديثات البرامج الثابتة.
• انقطاعات متكررة:
  • Ensure the router is placed in a central location, away from obstructions.
  • Update device drivers on your client devices.
  • Perform a factory reset if the issue persists after other troubleshooting steps.

9. المواصفات

10. الضمان والدعم

10.1. معلومات الضمان

The TP-Link Archer BE400 comes with a ضمان الشركة المصنعة لمدة عامينيرجى الاحتفاظ بإثبات الشراء الخاص بك لاستخدامه في المطالبات بالضمان.

10.2. الدعم الفني

For technical assistance, troubleshooting, or any inquiries regarding your product, please visit the official TP-Link Japan webموقع للحصول على موارد الدعم ومعلومات الاتصال.

Official TP-Link Japan Webموقع: https://www.tp-link.com/jp/support/