Gedsffati HD13-CGS Combination Smoke, Gas, and CO Alarm User Manual

1. المقدمة

The Gedsffati HD13-CGS is a multi-functional safety device designed to detect smoke, combustible gases (such as natural gas, LNG, LPG, methane, ethane, propane, and butane), and carbon monoxide (CO). This device plugs directly into a standard electrical outlet and features a built-in rechargeable battery for backup power during outages. It provides real-time monitoring and alerts users with sound and light alarms in the event of a detected hazard.

2. معلومات هامة حول السلامة

Please read and understand all instructions before installing and operating this alarm. Failure to follow these instructions may result in property damage, injury, or death. This alarm is designed to detect the presence of smoke, combustible gases, and carbon monoxide. It is not designed to detect fire, heat, or other gases. Regular testing and maintenance are crucial for proper operation.

• Do not paint over the alarm. Paint can clog the sensor openings and prevent the alarm from functioning correctly.
• Do not block the alarm's vents. Ensure proper airflow around the device.
• Do not install in areas with high humidity, excessive dust, or extreme temperatures.
• Test the alarm weekly to ensure it is functioning properly.
• في حالة الإنذار، قم بإخلاء المبنى على الفور واتصل بخدمات الطوارئ.

3. مواصفات المنتج

• الكشف المشترك: Monitors smoke, carbon monoxide (CO), and various combustible gases including Natural Gas, Liquefied Natural Gas (LNG), Liquefied Petroleum Gas (LPG), Methane (CH4), Ethane (C2H6), Propane (C3H8), and Butane (C4H10).
• أجهزة استشعار عالية الأداء: Utilizes electrochemical reaction, semiconductor, and photoelectric effect principles for rapid and accurate detection. Sensors have an approximate lifespan of 5 years.
• Near Real-time Detection: Sensors operate every 2 seconds for frequent and fast detection.
• بطارية قابلة لإعادة الشحن متكاملة: Features a 1000 mAh lithium battery providing approximately 10 hours of backup power during electrical outagإِسْ
• شاشة LCD ملونة كبيرة: A 2.45-inch high-resolution display shows real-time measurements for CO concentration, gas levels, smoke status, temperature, and humidity.
• إنذار الصوت والضوء: Emits a loud acoustic alarm and visual alerts when hazardous levels are detected (e.g., CO concentration above 50 ppm).

4. محتويات العبوة

• Gedsffati HD13-CGS Combination Smoke, Gas, and CO Alarm Unit
• دليل المستخدم

5. الإعداد والتثبيت

5.1 الإعداد الأولي

1. Unpack the alarm unit from its packaging.
2. Plug the device directly into a standard electrical outlet. Ensure the outlet is easily accessible and not obstructed.
3. Upon plugging in, the device will power on and begin its self-test sequence. The LCD screen will illuminate, and the built-in battery will start charging.

5.2 توصيات التوظيف

Proper placement is critical for effective detection. Consider the following guidelines:

• Carbon Monoxide (CO) Detection: Install at least 5 feet (1.5 meters) from fuel-burning appliances. Place at knee level or higher, but not on the ceiling, as CO mixes with air.
• Combustible Gas Detection: For natural gas (lighter than air), install near the ceiling, within 12 inches (30 cm) of the ceiling and 4-12 inches (10-30 cm) horizontally from the gas source. For LPG/propane (heavier than air), install near the floor, within 4-12 inches (10-30 cm) of the floor and 4-12 inches (10-30 cm) horizontally from the gas source.
• كشف الدخان: Install on the ceiling or high on a wall, away from corners. Avoid placing near windows, doors, or air vents where drafts might interfere with smoke reaching the sensor.
• General Placement: Install in common living areas, bedrooms, and near potential sources of hazards (e.g., kitchen with gas stove, furnace room). Avoid dead air spaces.

الشكل 1: خلفي view of the alarm, highlighting the plug for direct wall outlet connection and the 1000mAh battery capacity.

الشكل 2: مثالamples of suitable installation locations, including kitchens, living rooms, bedrooms, and recreational vehicles.

6. تعليمات التشغيل

6.1 تشغيل/إيقاف التشغيل

The device powers on automatically when plugged into an electrical outlet. There is a power button on the front panel, which can be used to cycle through display modes or initiate a test.

Figure 3: Front panel with power button and visual alarm indicators.

6.2 فهم العرض

The 2.45-inch color LCD screen provides real-time information:

• الغاز: Indicates the presence and level of combustible gases.
• ثاني أكسيد الكربون جزء في المليون: Displays the concentration of carbon monoxide in parts per million (ppm).
• دخان: Indicates the presence of smoke.
• درجة حرارة: يظهر درجة الحرارة المحيطة.
• رطوبة: Displays the ambient humidity level.
• مؤشر البطارية: Shows the charge level of the internal backup battery.

الشكل 4: مفصل view of the alarm's display, showing real-time readings for gas, CO, smoke, temperature, and humidity.

Figure 5: The alarm's display indicating current levels for gas, CO, smoke, temperature, and humidity.

6.3 مؤشرات الإنذار

When hazardous levels of smoke, combustible gas, or carbon monoxide are detected, the alarm will activate:

• إنذار مسموعة: A loud siren will sound.
• إنذار مرئي: The LCD screen will change color or display a warning message, and indicator lights may flash.

If the alarm sounds, immediately follow emergency procedures for your home or building. Do not ignore the alarm.

Figure 6: The alarm indicating an active alert with both sound and light.

7. الصيانة

7.1 التنظيف المنتظم

Clean the alarm regularly to prevent dust and debris from accumulating and affecting sensor performance. Use a soft, damp cloth to wipe the exterior. Do not use cleaning sprays or solvents.

7.2 اختبار الإنذار

Test the alarm weekly by pressing the test button (usually the power button or a dedicated test button). The alarm should sound, and the display should indicate a test in progress. If the alarm does not sound, refer to the troubleshooting section.

7.3 معلومات البطارية

The built-in 1000 mAh lithium battery provides backup power. It recharges automatically when the device is plugged into an active electrical outlet. Ensure the device is always plugged in to maintain battery charge and continuous protection.

7.4 Sensor Lifespan

The sensors in this device have an approximate lifespan of 5 years. After this period, the device should be replaced to ensure continued accuracy and reliability.

Figure 7: Internal components, illustrating the high-precision sensors and the 1000mAh battery.

8. استكشاف الأخطاء وإصلاحها

9. المواصفات

• ماركة: جيدسفاتي
• نموذج: HD13-CGS
• أنواع الكشف: Smoke, Carbon Monoxide (CO), Combustible Gases (Natural Gas, LNG, LPG, Methane, Ethane, Propane, Butane)
• مبدأ الاستشعار: Electrochemical (CO), Semiconductor (Gas), Photoelectric (Smoke)
• عمر المستشعر: حوالي سنتين تقريبا
• عتبة التنبيه: >50 ppm CO, specific levels for combustible gas and smoke
• عرض: شاشة LCD ملونة مقاس 2.45 بوصة
• بطارية احتياطية: بطارية ليثيوم قابلة لإعادة الشحن بسعة 1000 مللي أمبير في الساعة
• Battery Backup Duration: حوالي 10 ساعات (بعد الشحن الكامل)
• مصدر الطاقة: قابس التيار المتردد
• وزن السلعة: 90 جرام
• رمز المنتج العالمي: 747086495718
• ASIN: B0DRGXG8P3

10. الضمان والدعم

Specific warranty information for the Gedsffati HD13-CGS alarm is not provided in this manual. Please refer to the product packaging or contact the manufacturer directly for warranty details and customer support inquiries.