دليل مستخدم نظام الميكروفون اللاسلكي للجيتار الصوتي ACEMIC AT-5

1. المقدمة

This manual provides detailed instructions for the ACEMIC AT-5 Acoustic Guitar Wireless Microphone System. This system is designed to provide high-fidelity audio transmission for plucked string instruments, offering freedom of movement and clear sound reproduction. It utilizes UHF frequency for stable wireless connectivity and features a flexible gooseneck microphone for precise sound capture.

2. محتويات العبوة

يرجى التأكد من أن جميع العناصر المدرجة أدناه متضمنة في الحزمة الخاصة بك:

• 1 x ACEMIC AT-5 Wireless Microphone Transmitter (with gooseneck microphone)
• 1 x ACEMIC AT-5 Wireless Receiver (with 6.35mm jack and antenna)
• كابل شحن 1 x USB-C
• 1 x 3.5mm Audio Jack Adapter
• 5 x Velcro Adhesive Attachments
• 1 x Spare Microphone Foam Cover
• 1 × دليل المستخدم
• 1 × حقيبة حمل

3. انتهى المنتجview

The ACEMIC AT-5 system consists of two main components: the Transmitter and the Receiver.

3.1. Transmitter (Microphone Unit)

• ميكروفون معقوفة: Flexible arm for precise positioning.
• Microphone Foam Cover: Reduces plosives and wind noise.
• زر الطاقة: For turning the unit on/off.
• منفذ الشحن (USB-C): لإعادة شحن البطارية الداخلية.
• مستشعر الأشعة تحت الحمراء: For automatic pairing with the receiver.

3.2. جهاز الاستقبال

• مقبس صوت 6.35 ملم: يتصل بـ ampمكبرات الصوت، أو الخلاطات، أو أنظمة الصوت العامة.
• الهوائي: For stable signal reception.
• زر الطاقة: For turning the unit on/off.
• منفذ الشحن (USB-C): لإعادة شحن البطارية الداخلية.
• عرض: يظهر معلومات القناة.
• زر تبديل القناة: For manual channel selection.
• مستشعر الأشعة تحت الحمراء: For automatic pairing with the transmitter.

4. تعليمات الإعداد

Follow these steps to set up your ACEMIC AT-5 wireless microphone system:

4.1. شحن الوحدات

1. Connect the USB-C charging cable to the charging ports on both the transmitter and receiver units.
2. Plug the other end of the cable into a USB power adapter (not included) or a powered USB port.
3. The charging indicator will illuminate. A full charge typically takes 2.5 to 3 hours.
4. Once fully charged, the indicator light will change or turn off, depending on the unit.

4.2. Attaching the Transmitter to Your Instrument

1. Select a suitable location on your acoustic guitar, typically near the sound hole, where the transmitter can be securely attached without obstructing your playing.
2. Peel the backing from one of the Velcro adhesive attachments.
3. Apply the adhesive side firmly to the chosen spot on your guitar.
4. Attach the transmitter unit to the Velcro. Ensure it is secure.
5. Adjust the flexible gooseneck microphone to point towards the sound hole or strings for optimal sound capture.

4.3. توصيل جهاز الاستقبال

1. Ensure the antenna on the receiver is correctly installed and extended.
2. Plug the 6.35mm audio jack of the receiver directly into the input of your amplifier, PA system, or audio mixer.
3. If your device requires a 3.5mm input, use the provided 3.5mm audio jack adapter.

4.4. إقران الوحدات

The ACEMIC AT-5 system features automatic infrared pairing:

1. Power on both the transmitter and the receiver units.
2. Place the IR sensors of the transmitter and receiver close to each other (within a few inches).
3. The units will automatically pair. A successful connection is usually indicated by a stable light on both units.

5. التشغيل

5.1. تشغيل / إيقاف التشغيل

Press and hold the power button on each unit to turn it on or off.

5.2. اختيار القناة

The system offers 16 preset groups of adjustable channels to mitigate potential interference. If you experience interference, you can manually switch channels on the receiver using the channel switch button. Ensure that the transmitter and receiver are on the same channel for proper operation.

5.3. وضع الميكروفون

Adjust the flexible gooseneck microphone to achieve the desired sound. Experiment with different angles and distances from the sound hole or strings to find the optimal position for your instrument and playing style. The built-in high-sensitivity condenser microphone is designed to capture clear and realistic audio.

5.4. النقل اللاسلكي

The ACEMIC AT-5 system uses UHF frequency for stable transmission up to 130 feet (approximately 40 meters) in open areas. Performance may vary depending on environmental factors and obstacles.

6. الصيانة

6.1. التنظيف

امسح الوحدات بقطعة قماش ناعمة وجافة. لا تستخدم المنظفات السائلة أو المذيبات، لأنها قد تتلف الطلاء أو المكونات الداخلية.

6.2. التخزين

When not in use, store the ACEMIC AT-5 system in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the units are turned off before storage.

6.3. العناية بالبطارية

To prolong battery life, avoid completely discharging the units regularly. Recharge them periodically, even if not in frequent use.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your ACEMIC AT-5 system, refer to the following common problems and solutions:

8. المواصفات

9. الضمان والدعم

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Specific warranty terms may vary by region and retailer.