PARTPHONER Modern Outdoor Lamp ضوء آخر

1. المقدمة

This manual provides detailed instructions for the safe installation, operation, and maintenance of your PARTPHONER Modern Outdoor Lamp Post Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The PARTPHONER Modern Outdoor Lamp Post Light features a durable metal structure with a matte black finish and water-seeded glass shades, designed for outdoor use in various weather conditions. It is a hardwired lighting fixture, providing stable illumination for your garden, patio, backyard, walkway, or driveway.

الصورة 1.1: انتهىview of the PARTPHONER Modern Outdoor Lamp Post Light.

2. معلومات السلامة

WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker before installation, maintenance, or bulb replacement.

• يجب أن يتم تركيب هذا المنتج وفقًا لقواعد التركيب المعمول بها بواسطة شخص على دراية ببناء المنتج وتشغيله والمخاطر المرتبطة به.
• Consult a qualified electrician if you are not experienced with electrical installations.
• استخدم فقط المصابيح ذات الواط المحددtage and type (2 x 100-Watt max, E26 Base).
• لا تتجاوز الحد الأقصى للواطtage.
• تأكد من أن جميع التوصيلات الكهربائية آمنة ومعزولة بشكل صحيح.
• لا تقم بتعديل التركيب بأي شكل من الأشكال.
• احتفظ بالمواد القابلة للاشتعال بعيدًا عن تركيبات الإضاءة.
• The fixture is designed for outdoor use and is water-resistant (IP65). However, ensure all seals and connections are properly secured during installation to maintain water resistance.
• ارتدِ معدات السلامة المناسبة، بما في ذلك القفازات وواقيات العين، أثناء التركيب.

3. ماذا يوجد في الصندوق

يرجى التأكد من وجود جميع المكونات وعدم تلفها قبل البدء في التثبيت.

• Lamp Post Assembly (Arms, Lanterns, Top Column, Middle Column, Post Base)
• Bulbs (2x E26 Base, 100W max)
• تزايد شريحة
• صواميل سداسية
• كاب المكسرات
• صواميل الأسلاك
• براغي (أحجام مختلفة)
• Silicone Washers
• ألان رانتش
• دليل التعليمات

Note: Additional tools for ground installation (e.g., concrete, anchor bolts) are not included.

4. تعليمات التثبيت

مهم: Installation requires masonry work for ground preparation (digging holes, setting anchor bolts, pouring concrete) and electrical wiring. It is recommended to hire a qualified electrician for these tasks.

Refer to the installation video below for a visual guide to the assembly steps.

خطوات التجميع:

1. Prepare the Lanterns:
   Unscrew the bottom cover of each lantern and carefully remove the glass shade. Insert the recommended E26 bulb into the socket. Replace the glass shade and secure the bottom cover with the screws.
2. Attach Lanterns to Arms:
   Insert the lantern terminal connector into the arm terminal connector. Remove the protective film from the waterproof silicone washer and place it into the arm. Insert the socket screw into the three designated holes to secure the lantern to the arm. Repeat for the second lantern and arm.
3. Assemble Top Column:
   Remove the preassembled Philips machine screw from the top column. Insert a silicone washer into the upper threaded ends of the arm. Guide the electrical wire from the fixture through the top hole of the top column. Secure the assembly from the inside with washers and nuts. Insert the Philips machine screw into the bottom hole of the top column.
4. توصيل الأسلاك:
   Connect the black lantern wire to the black supply box wire with a wire nut. Connect the white lantern wire to the white supply box wire with a wire nut. Connect the ground wire (copper) to the ground wire from the supply box.
5. Attach Finial:
   Secure the finial to the top of the assembled arms and top column using the provided screws.
6. Connect Columns:
   Pull the wires through the middle and bottom columns. Carefully connect the top column to the middle column, and then the middle column to the bottom column by screwing them together. Ensure wires are not pinched.
7. Secure to Post Base:
   Place the bottom column over the post base, aligning the three screw holes. Secure the bottom column to the post base with three machine screws.
8. التثبيت الأرضي:
   Place the entire assembled lamp post base over the pre-installed anchor bolts in the ground. Secure the post base with hex nuts and cap nuts.

أبعاد:

الصورة 4.1: أبعاد المنتج لتخطيط التثبيت.

5. تعليمات التشغيل

The PARTPHONER Modern Outdoor Lamp Post Light is a hardwired fixture controlled by an external switch (not included). Once installed and wired to your home's electrical system, operate the light using the wall switch or other control mechanism connected to the circuit.

• Ensure the correct type and wattage of bulbs are installed.
• Turn on the external switch to illuminate the lamp بريد.
• Turn off the external switch to turn off the lamp بريد.

6. الصيانة

تضمن الصيانة الدورية طول عمر جهازك وأدائه الأمثلamp آخر الضوء.

• تنظيف: Clean the fixture regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or glass.
• استبدال المصباح: Always turn off the power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before handling. Replace with E26 base bulbs, maximum 100 watts per socket.
• تقتيش: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure all screws and nuts are tight. Check the glass shades for cracks or chips.
• حماية الطقس: While the fixture is water-resistant (IP65), extreme weather conditions may require additional inspection. Ensure seals remain intact.

الصورة 6.1: الـamp post light is designed to withstand various weather conditions.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

• ماركة: شريك
• رقم الموديل: STR-PO-003
• لون: أسود
• مادة: المعدن والزجاج
• أسلوب: حديث
• شكل تركيبات الإضاءة: ضوء آخر
• الاستخدام الداخلي/الخارجي: في الهواء الطلق
• مصدر الطاقة: كهرباء سلكية
• عدد مصادر الضوء: 2
• قاعدة المصباح: إي26
• واتtage: 100 watts max per bulb (Total 200 watts)
• مستوى مقاومة الماء: مقاوم للماء
• أبعاد العنصر (الطول × العرض × الارتفاع): 20 بوصة طول × 90 بوصة عرض × 20 بوصة ارتفاع
• التجميع المطلوب: نعم

Image 8.1: Detail of the water-seeded glass and matte black metal structure.

9. الضمان والدعم

This PARTPHONER product comes with a ضمان الشركة المصنعة لمدة عامينيغطي هذا الضمان عيوب المواد والصناعة في ظل الاستخدام العادي.

For warranty claims, technical support, or any questions regarding your product, please contact PARTPHONER customer service. Refer to your purchase documentation for contact details or visit the official PARTPHONER webموقع.

Please have your model number (STR-PO-003) and proof of purchase ready when contacting support.