WVCLTVJA 2 Axis Solar Tracker Controller Instruction Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of the WVCLTVJA 2 Axis Solar Tracker Controller. This system is designed to automatically orient solar panels towards the sun, maximizing energy capture throughout the day. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

Image: The WVCLTVJA 2 Axis Solar Tracker Controller unit shown with its external light sensor and connecting cable.

الإعداد والتثبيت

Proper installation is crucial for the optimal performance of your solar tracking system. Follow these steps carefully.

1. التفريغ والتفتيش

• قم بإخراج جميع المكونات من العبوة بعناية.
• Verify that all parts are present and undamaged. Refer to the packing list for a complete inventory.
• Contact your supplier immediately if any parts are missing or damaged.

2. تركيب وحدة التحكم

Mount the controller unit in a secure, weather-protected location, close to the solar panel array and power source. Ensure adequate ventilation and avoid direct sunlight exposure to the controller itself.

الصورة: الخلفية view of the controller, indicating mounting points for secure installation.

• Use appropriate screws and anchors for the mounting surface.
• Ensure the controller is mounted level to prevent inaccurate sensor readings.

3. توصيلات الأسلاك

All wiring should be performed by a qualified technician. Ensure power is disconnected before making any connections.

الصورة: الجبهة view of the controller showing the cable glands for connecting power, sensors, and motors.

1. مدخلات الطاقة: Connect the DC power supply (10-28V) to the designated power terminals. Observe correct polarity. The maximum current is 15A.
2. اتصالات المحرك: Connect the azimuth (East/West) and elevation (North/South) motors to their respective terminals. Refer to the wiring diagram provided with the product for specific motor terminal assignments.
3. مستشعر الضوء: Connect the external light sensor cable to its dedicated port. Position the light sensor on the solar panel array so it accurately detects sunlight from all directions without obstruction.

Ensure all cable glands are tightened to maintain the weather resistance of the unit.

تعليمات التشغيل

Once installed and powered, the controller will begin its automatic tracking sequence. The display provides real-time status information.

1. التشغيل الأولي

• After connecting power, the controller display will illuminate.
• The system will perform an initial calibration or seek the sun's position.

2. أزرار التحكم

الصورة: عن قرب view of the controller's display and control buttons: SET, N (North), W (West), E (East), S (South), and QUIT.

• جلس: Used to enter configuration mode or confirm settings.
• N (North): Manually moves the panel towards North (elevation).
• S (South): Manually moves the panel towards South (elevation).
• E (East): Manually moves the panel towards East (azimuth).
• W (West): Manually moves the panel towards West (azimuth).
• استقال: Exits configuration mode or stops manual movement.

3. Automatic Tracking

In normal operation, the controller automatically adjusts the solar panel's position based on the light sensor's input. The system continuously seeks the brightest point to optimize solar energy collection.

• The controller will make small adjustments periodically to follow the sun's path.
• During cloudy conditions, the system may remain stationary until sufficient sunlight is detected.

4. تجاوز يدوي

The N, S, E, W buttons can be used to manually adjust the panel's position. Pressing any of these buttons will temporarily override automatic tracking. Press يترك to return to automatic tracking mode.

صيانة

Regular maintenance ensures the longevity and efficiency of your solar tracking system.

• تنظيف: Periodically clean the light sensor dome to remove dust, dirt, or debris that may obstruct light detection. Use a soft, damp قطعة قماش.
• فحص الكابلات: Annually inspect all cables and connections for wear, damage, or corrosion. Ensure all cable glands are securely tightened.
• فحص المحرك: Listen for unusual noises from the motors during operation. Ensure the mechanical components of the tracking system move freely without obstruction.
• غلاف وحدة التحكم: Keep the controller housing clean and free from excessive dust or moisture.

استكشاف الأخطاء وإصلاحها

يرجى الرجوع إلى الجدول التالي للتعرف على المشكلات الشائعة وحلولها المحتملة.

إذا استمرت المشكلة بعد محاولة هذه الحلول، فيرجى الاتصال بدعم العملاء.

تحديد